• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.136-147
• /
• 2015

As it carry out RPS(Renewable Portfolio Standards), power producers are using the power bio-fuel oil to meet their RPS quota. In this study, we test the quality characteristics of raw materials for power bio-fuel oil and the property changes of power bio-fuel oil by the kind of feedstocks. The power bio-fuel oil and feedstocks were analyzed for item of quality standard such as acid number, viscosity and metal contents. And it was analyzed for composition distribution by FT-IT and HPLC. Such as low priced palm oil series has high acid number and ash contents due to high free-fatty acid and metal contents. And by-product of biodiesel have a tendency of high viscosity. The fuel properties of power bio-fuel oil, such as viscosity, acid number and metal contents are correlated with the constituent and the mixing ratio of the feedstocks.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.35-48
• /
• 2013

Biodiesel is an alternative diesel fuel which can be obtained from the transesterification of vegetable oils, animal fats and waste cooking oil. The objective of this study is to evaluate the properties of biodiesel obtained from different feedstocks (soybean, waste cooking, rapeseed, cottonseed and palm oils). The biodiesel derived from different feedstocks was analyzed for FAME (fatty acid methyl esther) content, kinematic viscosity, flash point, CFPP (cold filter plugging point) and glycerin content. The quality of biodiesel was tested according to the Korean and European standard (EN14214, requirements and test method for biodiesel fuel). The biodiesels derived from soybean, waste cooking, rapeseed and cottonseed oils contain high amount of unsaturated fatty acid, while palm biodiesel is dominated by saturated fatty acid. The fuel properties of biodiesel, such as low temperature performance, kinematic viscosity and oxidation stability are correlated with the FAME composition components in biodiesel.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.8
• /
• pp.1292-1300
• /
• 2020

Objective: To explore feed resources capable of replacing regular poor-quality fodder, this study was conducted to evaluate the effects of additives on the fermentation quality, in vitro digestibility and aerobic stability of mulberry leaves silage. Methods: The mulberry leaves were ensiled either untreated (control) or treated with 1×10⁶ cfu/g fresh matter Lactobacillus plantarum (L), 1% glucose (G), 3% molasses (M), a combination of 1% glucose and Lactobacillus plantarum (L+G), and a combination of 3% molasses and Lactobacillus plantarum (L+M). The fermentation quality and chemical composition were analyzed after 7, 14, 30, and 60 d, respectively. The 60-d silages were subjected to an aerobic stability test and fermented with buffered rumen fluid to measure the digestibility. Results: Inoculating lactic acid bacteria (LAB) resulted in more rapid increase in lactic acid concentrations and decline in pH of mulberry leaves silage as compared control. Higher acetic acid and lower ethanol and ammonia nitrogen concentrations (p<0.05) were observed in the LAB-inoculated silages as opposed to control during ensiling. The LAB-inoculated silages contained lower water-soluble carbohydrates compared with control during the first 14 d of ensiling, and lower neutral detergent fibre (p<0.05) concentrations as compared with non-LAB inoculated silages. Adding molasses alone increased (p<0.05) the digestibility of dry matter (DM). The aerobic stability of mulberry leaves silage was increased by LAB inoculation, whereas decreased by adding glucose or molasses. Conclusion: The LAB inoculation improved fermentation quality and aerobic stability of mulberry leaves silage, while adding glucose or molasses failed to affect the fermentation and impaired the aerobic stability. Inoculating LAB alone is recommended for mulberry leaves especially when ensiled at a relatively high DM.

• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.2
• /
• pp.69-74
• /
• 2009

Potato Virus Y (PVY), PVY-vein necrosis strain, causes severe damage at growth, yield and leaf quality on flue-cured tobacco in Korea. The development of PVY resistant flue-cured varieties without quality deterioration is therefore urgently desired. The flue-cured tobacco, KF120 (Korea Flue-cured 120), was a male-sterile (ms) $F_1$ hybrid derived from the cross between msKF117 and KF0007-7. msKF117 was developed from the cross of NC82 with N. africana and KF0007-7 was developed from the cross of KF117 with NC82. The agronomic characteristics and disease resistance of KF120 was evaluated during 2006-2007 field performance test. It showed better growth characteristics and yield performance than standard cultivar KF109. It had 2 more leaves per plant, flowered 2 days later than KF109. The yield of cured leaf of KF120 was increased by about 5% compared to KF109. The chemical composition and physical properties of the cured leaf of KF120 were as much acceptable as those of KF109. KF120 showed high resistance to PVY compared to KF109. It showed a similar mode of resistance to bacterial wilt and black shank as was found in KF109.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.635-640
• /
• 1997

The oxidative stability of the potato chip prepared with canola oil fortified with antioxidnats was studied to explore the possibility of substituting it for imported frying fats and oils. BHT, BHA, TBHQ and silicone were added to the oil at a level of 0.02% and 10 ppm, respectively. Potato chip samples were prepared in a commercial scale and stored at $25.0{\pm}0.5^{\circ}C$ for 5 months. The oxidative stability of the extracted oils from potato chips during storage was estimated on the basis of some their physico-chemical changes, such as acid values, peroxide values, iodine values, ansidine values, fatty acid composition of the oils. An organoleptic test for the flavor of the samples was also performed. The oxidative stability of the samlpes was estimated on the basis of the changes of the parameter values. The effectiveness of the antioxidants was in the order of canola oil+TBHQ (0.02%)+silicone (10 ppm) > canola oil+TBHQ (0.02%) > canola oil+BHA (0.02%)+silicone (10 ppm) > canola oil+BHT (0.02%)+silicone (10 ppm) > canola oil+BHA (0.02%) > canola oil+BHT (0.02%) > canola oil. The antioxidant effect of canola oil+TBHQ (0.02%)+silicone (10 ppm) was more salient than any other antioxidant used in the potato chip.

• Applied Biological Chemistry
• /
• v.19 no.3
• /
• pp.155-161
• /
• 1976

The say sauce koji where made use of different kinds of seed koji were used to brewing of soysauce. The pure, complex and bacteria contaminated seed koji were used in this experiment, And the euzyme activity, Micrflora, chemical composition and TN-solubility ratio of each soysauce mash during the fermentation periods were measured respectively. The results obtained were as follows. 1. The neutral and alkali protease activity of each soysauce mash were decreassed in the process of fermentation period. In this case the activitities of protease in the bacteria contaminated koji were remarkably decreased. 2. The microflora in one ml of soysauce mash showed the tendency of increase in process of fermentation period. The increase in bacteria contaminated seed koji group was remarkable. 3. The content of total nitrogen, amino-N and ammonia-N in soysauce during the course of fermentation were increase. And alcohol, reducing sugar and pure extract contents in soysauce were also increased in the former stage of fermentation, but in the latter stage of fermentation decreased. 4. Though the content of ammonia-N in bacteria contaminated seed koji group was high, the pH value was low in comparison with the others. 5. Pure seed koji group were shown the most effective in the result of total nitrogen solubility ratio and sensual test, while the bacteria contaminated seed koji group was the worst.

• Journal of dental hygiene science
• /
• v.18 no.4
• /
• pp.265-270
• /
• 2018

The purpose of this study was to investigate the chemical properties of some commercially available mouthwashes and to ascertain whether the mouthwashes accelerated mineral loss in dental enamel. Five commercially available mouthwashes were selected from the three largest malls in Korea: Perio Total 7 Aqua Cool Mint Strong $Fresh^{TM}$ (PS; LG Household & Health Care Ltd.), Garglin $Original^{TM}$ (Dong-A Pharmaceutical Co., Ltd.), Garglin $Zero^{TM}$ (Dong-A Pharmaceutical Co., Ltd.), Listerine Naturals $Citrus^{TM}$ (LC; IDS Manufacturing Ltd.), and Listerine Cool $Mint^{TM}$ (LM; IDS Manufacturing Ltd.). The composition, pH, and titratable acidity of the mouthwashes were investigated. Six bovine teeth specimens were prepared for each mouthwash group. Each of the six specimens was individually immersed in 30 ml aliquots of mouthwash for 1 minute, 30 minutes, 90 minutes, and 120 minutes, and the samples were placed in a $36.5^{\circ}C$ stirred incubator. The degree of mineral loss (${\Delta}F$) of the tooth surface area exposed to mouthwash, compared with normal teeth, was analyzed by quantitative light-induced fluorescence-digital. The difference in ${\Delta}F$ among mouthwash groups was examined by the Kruskal-Wallis H test (${\alpha}=0.05$). The contents of mouthwashes differed between Listerine and other products, and the pH ranged from 4.09 to 6.75. The titratable acidity of PS was the lowest at 0.63 ml and highest at 9.25 ml for LM. Minor mineral loss was observed when dental specimens were immersed in the Listerine products (LC and LM) for more than 90 minutes, but the degree of mineral loss for Listerine products was not statistically significantly different from that for groups without mineral loss. In conclusion, all five commercially available mouthwashes showed no harmful effects on tooth enamel.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.197-210
• /
• 2000

Surface roughness is one of implant surface topography and it's found that surface roughness characterizations, such as surface energy, oxide layer thickness and its chemical composition, are closely correlated if the roughness is changed. Several studies showed the importance of analyzing surface structure so the surface structure of thread implant was analyzed to measure the implant quality exactly. In this study, surface roughness of 4 implants - MK $II^{(R)}$(Nobel Biocare), $RBM^{(R)}$(Life-Core, USA), $Osseotite^{(R)}$(3i, USA), $TPS^{(R)}$(Life-Core, USA) - were measured using $Accura^{(R)}$ and 40 implants were installed into 4 sets of ten bovine ribs based on the parameters from the measurements. From this test, the following conclusions for the initial stability were drawn by measuring and comparing RFA, Periotest Value (PTV), Removal Torgue Value (RTV). 1. $R_a$ value in surface roughness measurement was increasing by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ and $R_q$ value was the same order. 2. $R_q$ value in each section was observed to increase by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ in top and $MKII^{(R)}$, $RBM^{(R)}$, $Osseotite^{(R)}$, $TPS^{(R)}$ in mid-section but the value of $MKII^{(R)}$ bottom was the lowest, followed by $Osseotite^{(R)}$, $RBM^{(R)}$ and $TPS^{(R)}$. 3. RFA increased by the order of $RBM^{(R)}$(7042Hz), $MKII^{(R)}$(7047Hz), $Osseotite^{(R)}$(7076Hz), $TPS^{(R)}$(7168Hz) and there was no significance between each group. 4. PTV was increasing by the order of $MKII^{(R)}$(-1.62), $TPS^{(R)}$(-1.92), $Osseotite^{(R)}$ & $RBM^{(R)}$(-2.08) and there was no significance, either. 5. Removal torque in RTV measurement showed the increasing order of $MKII^{(R)}(5.31kgf{\cdot}cm)$, $Oeeotite^{(R)}(5.71kgf{\cdot}cm)$, $TPS^{(R)}(5.92kgf{\cdot}cm)$ and $RBM^{(R)}(7.24kgf{\cdot}cm)$ and there was no significance among groups. Above observations explains that surface roughness does not make any impact on the initial stability of implants installation.