• 한국물환경학회지
• /
• 제34권1호
• /
• pp.77-83
• /
• 2018

This paper aims to evaluate the results of toxicity testing with Daphnia magna and Vibrio fischeri on wastewater samples which might be influenced by ion imbalance. The effluents from factories were found to be more toxic with high salinity levels than those from public wastewater treatment plant (WTP) and sewage treatment plant (SWP). Clion composition was highest in the effluent, in terms of percentage, which was followed by $Na^+$, $SO_4^{2-}$ and $Ca^{2+}$. $K^+$ and $Mg^{2+}$ ion was relatively low. The sensitivity of D. magna test results was higher than V. fischeri. Among samples which were proved by V. fischeri testing to be nontoxic, the composition ratio of each ion whether toxic samples or nontoxic samples which were decided by D. magna toxicity testing, were compared. $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$ ion composition ratio showed high level in nontoxic samples whereas $SO_4^{2-}$ and $Cl^-$ ion composition ratio was high in toxic samples. Accordingly, $SO_4^{2-}$ and $Cl^-$ ion seemed to be considered the ions causing toxicity in effluent. Toxicity from some categories of industries (Mining of non-metallic minerals, Manufacture of basic organic petrochemicals, Manufacture of other basic organic chemicals, Manufacture of other chemical products etc.) seemed to be influenced by salinity. The Ion concentration in influent and effluent were similar. Concentration of $Na^+$, $Cl^-$, $K^+$, $Ca^{2+}$ ions were high in influent, however $Mg^{2+}$ and $SO_4^{2-}$ ions were high in effluent.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.79-85
• /
• 2002

플라즈마 용사코팅법을 이용하여 산화몰리브덴이 첨가된 크로미아 용사코팅층을 제조하여 MoO$_3$첨가에 따른 마찰, 마멸특성을 조사하였다. 상온 마찰, 마멸특성에 대한 실험을 위하여 왕복동 마멸시험장치를 사용하였다. 마멸시험후 마멸면의 물리적 변화와 화학적 조성의 변화를 SEM와 XPS를 통하여 살펴보았다. 산화몰리브덴이 첨가된 코팅층에서 마찰계수의 감소를 관찰할 수 있었다. 그러나 마멸량의 경우 산화몰리브덴이 첨가되지않은 크로미아 코팅층에서 가장 낮은 값을 나타내었다. 산화몰리브덴이 첨가된 코팅의 마멸된 표면에 마탈, 마멸에 유리한 보호막의 형성이 광범위하게 일어남을 알 수 있었다. 이러한 보호막에 산화몰리브덴이 MoO$_3$의 형태로 존재하는 것을 XPS분석을 통하여 알 수 있었다. 보호막에 산화몰리브덴의 존재가 마찰계수를 감소시키는 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.10-22
• /
• 2007

To prepare weather-resistant silicone/acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by a radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The compositions of monomers were adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects for weatherability were examined. The presence of MPTS in silicone/acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the silicone/acrylic resins containing 30 wt% of MPTS had weather-resistant properties.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.177-183
• /
• 2018

PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer's instructions. After storage in distilled water at $37^{\circ}C$ for 24 h, the bonded samples were sectioned longitudinally to produce $1.0{\times}1.0mm$ beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey's test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.222-228
• /
• 2018

석유화학산업의 대표적인 물질로 쓰이는 벤젠은 각종 화학 제품의 기초 물질이다. 그러나 일반적으로 벤젠은 석유화학 산업에서 순수 물질로 존재하지 못하고 알코올류와 벤젠 혼합물로 존재하게 된다. 또한 알코올을 한 성분으로 하는 혼합물은 공비 혼합물이 생성되기 때문에 분리 정제를 위해서는 상평형 데이터가 필수적이다. 본 연구에서는 알코올을 대표하는 1-프로판올을 사용하여 1-프로판올/벤젠 계에 대하여 재순환 평형장치를 이용하여 평형 온도/압력 효과에 따른 상평형 연구를 수행하였다. 측정된 기-액 평형 데이터는 UNIQUAC 식과 WILSON 식을 이용하여 상관관계 시키고 Gibbs/Duhem식을이용하여열역학적건전성을확인하였다. 상평형실험결과 RMSE (Root Mean Square Error)와 AAD (Average Absolute Deviation)는 두 모델식에서 0.05 이하의 값을 보여 실험값과 계산 값이 잘 일치함을 알 수 있었다. 또한 Gibbs/Duhem식을 이용하여 열역학적 건전성을 판별한 결과 잔류항 값이 ${\pm}0.2$ 이내에 분포하는 것을 통해 데이터에 대한 건전성을 확인할 수 있었다.

• 폴리머
• /
• 제28권5호
• /
• pp.412-425
• /
• 2004

팽창 흑연을 포함한 NBR/GTR 발포체를 제조하고, 이들의 난연특성 및 발포특성에 팽창 흑연이 미치는 영향을 조사하였다. 고무재료로 NBR만을 사용한 경우 팽창 흑연 30 phr, 폐타이어 고무분말 (GTR)을 포함한 경우 팽창 흑연 10 phr 범위 내에서, 발포특성에 있어서는 팽창 흑연을 사용하지 않은 경우와 유사한 셀 구조 및 첨가제 분산을 가짐을 알 수 있었다. 한계 산소 지수 (LOI) 분석 결과 팽창 흑연의 함량이 증가함에 따라 LOI가 증가함을, 콘칼로리미터 분석 결과 LOI분석 결과와 유사한 경향성을, 즉 LOI가 증가함에 따라 열방출속도 (HRR), 총열방출량 (THR) 등이 감소함을 알 수 있었다. 또한 상기한 조성 내에서 우수한 난연특성을 즉, 낮은 열방출속도, 총열방출량, 유효연소열 (EHC) 등을 가짐을 알 수 있었다. 연기밀도에 있어 콘칼로리미터 분석에서의 A-COY와 유사한 경향성을, TGA 분석에 있어 LOI 및 콘칼로리미터 분석결과와 대체적으로 유사함을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.66-71
• /
• 1995

This study reviews the internationally existing standards for fly ash and the other pozzolanic materials. The standards reviewed for this report covers the thirteen contries around the world including USA. It is found that the comparison of standards appeared to be different for technical test requirements from the country to country. This may be due to the different composition of fly ash produced in each different country as by-product. It is importantly shown that the four countries, including USA have standardized to compose the total 70% of $SiO_2+Al_2O_3+Fe_2O_3$. The other countries have required to have the individual chemical composition, such as 45% $SiO_2$ in Japan. The loss on ignition is generally in the range of 5-6%, but the maximum 12% was allowed in some countries. This depends on the quality of fly ash. The moisture content is generally less than 3% in all countries except India allows up to 12% The pozzolanic activity (as the compression) has been standardized that the 28 days curing in compression was subjected in all countries but 91 days curing in compression was tested in Japan. It is shown that KS L 5405 is almost identical to JIS A 6201.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.395-400
• /
• 2012

In this study, we have investigated the surface morphology of hydroxyapatite (HA) coated Ti alloy surface using pulsed laser plating. The HA (tooth ash) films were grown by pulsed KrF excimer laser, film surfaces were analyzed for topology, chemical composition, crystal structure and electrochemical behavior. The Ti-6Al-4V alloy showed ${\alpha}$ and ${\beta}$ phase, Cp-Ti showed ${\alpha}$ phase and the HA coated surface showed HA and Ti alloy peaks. The HA coating layer was formed with $1-2{\mu}m$ droplets and grain-like particles, particles which were smaller than the HA target particle, and the composition of the HA coatings were composed of Ca and P. From the electrochemical test, the pitting potential (1580 mV) of HA coated Ti-6Al-4V alloy was higher than those of Cp-Ti (1060 mV) and HA coated Cp-Ti (1350 mV). The HA coated samples showed a lower current density than non-HA coated samples, whereas, the polarization resistance of HA coated samples showed a high value compared to non-HA coated samples.

• 한국연초학회지
• /
• 제6권2호
• /
• pp.155-168
• /
• 1984

Field test were conducted to select the best method for soil phosphorus test and to obtain the critical levels of each method for P fertilizer recommendations based on tobacco production. Truog method was recognized to be the mort suitable one for soil P test. N. Carolina, Bray No.1 and Olsen methods were followed in order. Bray No. 2 and Lancaster methods showed the least satisfaction. The critical levels of available P by lancaster, Bray No. 1, N. Carolina,01sen, and Truog methods were 55ppm, 32ppm, 21ppm, 19ppm, and 22ppm, respectively. Below the critical level a large yield response can be expected with 10kg $P_2O_5$/10a, above critical level little or no response is expected. In soils the more the initial available p, the more available P was carried over, while the more the total amount of silt and clay, the less the residual P was found. The increase in residual P by 10kg of $P_2O_5$ was greater than that of 5kg/10a. The chemical composition and the price of the cured leaf were not affected by the $P_2O_5$ application, indicating that the increase in the rate of $P_2O_5$ application would not exert on the quality of tobacco.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.