• Macromolecular Research
• /
• v.13 no.3
• /
• pp.212-217
• /
• 2005

The pyrolysis kinetics of polyurethanes synthesized from polycaprolactone diol (PCL) and diisocyanate (HDI, $H_{12}MDI$) using catalysts such as dibutyltin dilaurate (DBTDL) were studied by a thermogravimetric (TG) technique, which involved heating the sample at the rates of 10, 20 and $30^{\circ}C$/min. The effect of the kind of diisocyanate and the hard segment contents on the activation energy and reaction order were examined at conversions ranging from 1 to $100\%$. The activation energies at first increased slowly with increasing conversion. Also, differential scanning calorimetry (DSC) was used to investigate the structural differences in each polyurethane. DSC can reveal the melting behavior, in terms of the glass transition temperature ($T_g$), which is known to vary as a function of the stoichiometry and processing conditions.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.318-324
• /
• 2018

In this study, PAN (polyacrylonitrile) based activated carbon fibers were prepared by water vapor activation method which is a physical activation method. Activation was performed with temperature and time as parameters. When the activation temperature reached 700, 750 and $800^{\circ}C$, the activation was carried out under the condition of a water vapor flow rate of 200 ml/min. In order to analyze the pore structure of activated carbon fibers, the specific surface area ($S_{BET}$) was measured by the adsorption/desorption isotherm of nitrogen gas and AFM analysis was performed for the surface analysis. Tensile tests were also conducted to investigate the effect of the pore structure on mechanical properties of fibers. As a result, the $S_{BET}$ of fibers after the activation showed a value of $448{\sim}902m^2/g$, the tensile strength decreased 58.16~84.92% and the tensile modulus decreased to 69.81~83.89%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.159.2-159.2
• /
• 2011

In this study, we prepared the activated graphite nanofibers (A-GNFs) via chemical activation with KOH reagent. The effect of A-GNFs on the surface and textural properties of Ni-loaded graphite nanofibers (Ni/GNFs) was investigated by X-ray diffraction (XRD), transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET). The textural properties of samples were investigated by $N_2$/77K adsorption isotherms. The electrochemical performances were investigated by cyclic voltammetry. As a results, the electrochemical performances of Ni/GNFs were improved with usage of A-GNFs. This could be interpreted by the high specific surface area and large total pore volume of the A-GNFs.

• Journal of Hydrogen and New Energy
• /
• v.5 no.1
• /
• pp.9-17
• /
• 1994

Activation behavior, hydriding rate and disintegration were studied for a compact in pellet form and hydrogen storage alloy particles treated with newly developed inorganic solution. Cylindrical disc of 12.95mm diameter and of 7.1mm thickness was prepared by compressing(8ton) a mixture of $MmNi_{4.5}Al_{0.47}$ and PTFE. Chemical treatment of particles with 1mol of solution was performed at room temperature for several hours until the pH of solution did not change. Chemical treatment made much accelerated activation without any incubation period which generally exists in the untreated alloys and the hydriding reaction rate after full activation also was improved.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.419-424
• /
• 2014

The pro-apoptotic BCL-2 family protein BID activates BAK and/or BAX, which form oligomeric pores in the mitochondrial outer membrane. This results in the release of cytochrome c into the cytoplasm, initiating the apoptotic cascade. Here, we utilized liposomes encapsulating sulfo-rhodamine at a controlled temperature to improve upon a previously reported assay system with enhanced sensitivity and specificity for measuring membrane permeabilization by BID-dependent BAK activation. BAK activation was inhibited by BCL-$X_L$ protein but not by a mutant protein with impaired anti-apoptotic activity. With the assay system, we screened a chemical library and identified several compounds including trifluoperazine, a mitochondrial apoptosis-induced channel blocker. It inhibited BAK activation by direct binding to BAK and blocking the oligomerization of BAK.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.43-51
• /
• 2012

Rreactivity of persulfate (PS) for oxidation of TCE under various conditions such as heat, $Fe^{2+}$, and UV was investigated. It was found that degradation rate of TCE increased with increasing temperature from 15 to $35^{\circ}C$. At pH 7.0, the rate constants (k) at 15, 25, 30, and $35^{\circ}C$ were 0.07, 0.30, 0.74, and $1.30h^{-1}$, respectively. For activation by $Fe^{2+}$, removal efficiency of TCE increased with increasing $Fe^{2+}$ concentration from 1.9 mM to 11 mM. The maximum removal efficiency of TCE was approximately 85% when pH of the solution dropped from 7.0 to 2.5. Degradation of TCE by UV-activated PS was the most effective, showing that the degradation rate of TCE increased with inreasing PS dosage; the rate constants (k) at 0.5, 2.5, and 10 mM were 34.2, 40.5, and $55.9h^{-1}$, respectively. Our results suggest that PS activation by UV/PS process could be the most effective in activation processes tested for TCE degradation. For oxidation process by PS, however, pH should be observed and adjusted to neutral conditions (i.e., 5.8-8.5) if necessary.

• Carbon letters
• /
• v.25
• /
• pp.103-112
• /
• 2018

Hierarchically porous, chemically activated carbon materials are readily derived from biomass using hydrothermal carbonization (HTC) and chemical activation processes. In this study, empty fruit bunches (EFB) were chosen as the carbon source due to their sustainability, high lignin-content, abundance, and low cost. The lignin content in the EFB was condensed and carbonized into a bulk non-porous solid via the HTC process, and then transformed into a hierarchical porous structure consisting of macro- and micropores by chemical activation. As confirmed by various characterization results, the optimum activation temperature for supercapacitor applications was determined to be $700^{\circ}C$. The enhanced capacitive performance is attributed to the textural property of the extremely high specific surface area of $2861.4m^2\;g^{-1}$. The prepared material exhibited hierarchical porosity and surface features with oxygen functionalities, such as carboxyl and hydroxyl groups, suitable for pseudocapacitance. Finally, the as-optimized nanoporous carbons exhibited remarkable capacitive performance, with a specific capacitance of $402.3F\;g^{-1}$ at $0.5A\;g^{-1}$, a good rate capability of 79.8% at current densities from $0.5A\;g^{-1}$ to $10A\;g^{-1}$, and excellent life cycle behavior of 10,000 cycles with 96.5% capacitance retention at $20A\;g^{-1}$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.426-432
• /
• 2013

The mechanisms concerning C-Cl activation of $CCl_4$ by $CHBr^{{\cdot}-}$ and $CBr{_2}^{{\cdot}-}$ have been comparatively investigated in theory. Optimized geometries and frequencies of all stationary points on PES are obtained at the BhandHLYP/aug-cc-pVTZ level of theory, and then the energy profiles are refined at the QCISD(T) method with the aug-cc-pVTZ basis by using the BhandHLYP/aug-cc-pVTZ optimized geometries. Our calculated findings suggest that in the title reactions the major mechanisms consist of both Cl-abstraction and $S_N2$ substitution reactions. Also, a succeeding pathway described by electron transfer was revealed before the initial Cl-abstraction products separate. Those are consistent with relevant experimental results.

• Carbon letters
• /
• v.16 no.2
• /
• pp.127-131
• /
• 2015

In this work, highly porous carbons were prepared by chemical activation of carbonized biomass-derived aerogels. These aerogels were synthesized from watermelon flesh using a hydrothermal reaction. After carbonization, chemical activation was conducted using potassium hydroxide to enhance the specific surface area and microporosity. The micro-structural properties and morphologies were measured by X-ray diffraction and scanning electron microscopy, respectively. The specific surface area and microporosity were investigated by $N_2$/77 K adsorption-desorption isotherms using the Brunauer-Emmett-Teller method and Barrett-Joyner-Halenda equation, respectively. Hydrogen storage capacity was dependent on the activation temperature. The highest capacity of 2.7 wt% at 77 K and 1 bar was obtained with an activation temperature of $900^{\circ}C$.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.303-305
• /
• 2001

Porous carbons have beef used as adsorbents, filters, catalyst supports, etc. due to well-development pore structure. Porous carbons can be prepared by two different activation processes i.e. physical activation by steam or CO$_2$, and chemical activation by KOH, H$_3$PO$_4$ etc. from various raw material. Recently, agricultural wastes such as rice hulls [1], coconut shell [2-31 and straws [4] are growing interest as precursors fur porous carbons due to its easy availability and cheapness. (omitted)