• 제목/요약/키워드: Check Table

검색결과 125건 처리시간 0.031초

사용상황별 제품유형에 따른 온라인 점포 제품디스플레이의 유용성 - 제품 휴대성의 조절효과를 중심으로 - (The Usefulness of Product Display of Online Store by the Product Type of Usage Situation - Focusing on the moderate effect of the product portability -)

  • 이동일;최승훈
    • 한국유통학회지:유통연구
    • /
    • 제16권2호
    • /
    • pp.1-24
    • /
    • 2011
  • 오프라인 구매환경과는 달리 온라인 환경에서는 제품을 직접 눈으로 확인하고 만져 볼 수 없다. 때문에 온라인 쇼핑몰을 구축하고 운영하는 입장에서는 보다 구체적인 제품정보를 제공해야 하며(김광석 2008), Alba (1997)는 제공된 정보의 질은 소비자들이 구매 후 만족을 얼마나 예상할 수 있는 가로 결정된다고 정의한 바 있다. 이에 패션 의류 온라인 쇼핑몰을 중심으로 실제 모델이 제품을 착용한 사진정보(실착사진)를 제공함으로써 실제 제품사용에 따른 결과를 제시하여 제품정보의 유용성을 높이고 있다. 한편 온라인 환경에서 소비자들의 제품에 대한 제한된 지각을 극복하는 또 다른 수단으로써, 가상제품경험은 가장 효과적인 것으로 논의되어 왔다(Jiang & Benbasat 2005). 그러나 가상현실도구의 도입과 지속적 활용에는 일반적인 텍스트/사진 정보와 비교해 높은 비용과 기술적 전문성을 요구한다(Shaffer 2006). 이는 특히 영세 소매상 입장에서 시장에 대한 진입장벽으로 작용하는 한편, 소비자의 정보처리과정에서는 오히려 단순한 형태의 정보에 비하여 더 높은 수준의 인지적 노력을 요구할 수 있다. 따라서 이러한 도구들의 활용하는 것이 소비자들의 정보과부하를 초래해 제품에 대한 핵심정보 취득을 방해하고, 소비자의 지각된 정보유용성에 부정적 영향을 미칠 수 있다. 이에 본 연구에서는 제품유형을 소비자들의 제품 사용상황에 따라 휴대제품과 설치제품으로 구분하고, 이때 정지사진, 실착사진, VR로 대별되는 제품정보의 형태에 따른 소비자들의 지각된 정보의 유용성, 쇼핑몰에 대한 태도와 품질평가, 구매의도, 재방문 의도를 측정하기 위한 실험을 진행했다. 그 결과 소비자 구매의도에 영향을 미치는 종속변수군에 대해 제품유형과 제품정보형태가 상호작용효과를 일으키는 것을 확인할 수 있었다.

  • PDF

AMC G-Box를 이용한 영상유도장치의 효율적인 정도관리 (The effective quality assurance for image guided device using the AMC G-Box)

  • 김정미
    • 대한방사선치료학회지
    • /
    • 제26권2호
    • /
    • pp.199-206
    • /
    • 2014
  • 목 적 : 최근 영상유도 방사선치료의 급증에 따라 영상유도장치의 정도관리를 철저히 시행할 필요가 있다. 특히 영상유도 방사선치료는 장치의 정확성을 기본 전제로 하기 때문에 이에 대한 정도관리가 필수적으로 행해져야 한다. 본원에서는 영상유도장치의 정도관리를 기존의 팬텀(Phantom)보다 효율적인 팬텀을 자체 제작하여 정확하고 효율적인 정도관리를 이행하고자 한다. 대상 및 방법 : 영상유도장치의 정도관리 항목으로 매우 중요한 5가지를 설정하고, 그 항목에 대하여 효율적이고 정확한 정도관리가 이루어 질 수 있는 팬텀(AMC G-Box)을 자체 제작하였다. 정도관리 항목은 Iso-center와 영상유도장치의 중심 일치성, 구현된 영상의 실측 정확성, 4 방향의 중심일치성, 영상유도 이동의 정확성 및 CBCT(Cone Beam CT)에서 구현된 HU(Hounsfield Unit)의 재현성으로 설정하였다. 이 항목에 대하여 $10cm{\time}10cm{\time}10cm$의 정사각형 팬텀을 1 cm두께의 아크릴로 제작하였으며 CBCT HU을 측정하기 위해 팬텀안에 각각 밀도가 다른 3개의 물질을 삽입하였다. 팬텀에는 중심과 일정한 위치를 가리키는 표식을 만들어서 중심과 일치성 검사를 할 수 있도록 하였다. 실험은 기존 각각의 팬텀을 이용한 정도관리를 실시하고, 새로 제작된 AMC G-Box로 실시한 후 그 결과 값을 비교하고 소요되는 시간과 문제점을 분석하였다. 사용된 치료기는 Varian사의 4개의 모델이고, 1주 간격으로 2회 측정하였다. 결 과 : 완성된 AMC G-Box를 이용한 영상유도장치의 정도관리를 시행하였을 때, 기존 개별로 구성된 팬텀을 이용한 정도관리 결과를 보았을 때, $0.2mm{\pm}0.1$이내에서 결과 값이 같았다. 또한 기존의 방법일 경우 최소 30분에서 45분이 소요되었으나, AMC G-Box를 이용하였을 때는 15분~20분이 소요되어 50%이상 시간을 감소하였다. 결 론 : 영상유도장치는 사용기간이 지남에 따라 일치성과 정확성이 떨어지는 경향이 있다. 따라서 관련된 정도관리를 주기적으로 철저하게 할 필요성이 있다. 특히 일치성 검사는 매일 점검해야하는 항목이다. 이러한 정도관리를 AMC G-Box를 이용할 경우 정확한 정도관리를 효율적으로 실시함으로써, 장치와 환자 치료의 안정성과 정확성을 높일 수 있었다.

"감자에 대한 항생제(抗生劑) 피마리신의 통계적(統計的) 효과(效果) 분석(分析)" (INVESTIGATION OF THE EFFECT OF AN ANTIBIOTIC "P" ON POTATOES)

  • 김종훈
    • 품질경영학회지
    • /
    • 제5권2호
    • /
    • pp.59-120
    • /
    • 1977
  • An antibiotic 'P', which is one of the products of the Gist Brocades N. V. is being tested by its research department as fungicide on seed-potatoes. For this testing they designed experiments, with two control groups, one competitor's product, eight formulations of the antibiotic to be tested in different concentrations and one mercury treatment which can not be used in practice. The treated potatoes were planted in three different regions, where bifferent conditions prevail. After several months the harvested potatoes are divided in groups according to their diameter, potato illness is analysed and counted. These data were summarised in percentage and given to us for Analysis. We approached and analysed the data by following methods: a. Computation of the mean and standard deviation of the percenage of good results in each size group and treatment. b. Computation of the experimental errors by substraction of each treatment mean from observed data. c. Description of the frequency table, plotting of a histogram and a normal curve on same graph to check normality. d. Test of normality paper and chi-sqeare test to check the goodness of fit to a normal curve. e. Test for homogeneity of variance in each treatment with the Cochran's test and Hartley's test. f. Analysis of Variance for testing the means by one way classifications. g. Drawing of graphs with upper and lower confidence limits to show the effect of different treatments. h. T-test and F-test to two Control mean and variance for making one control of Dunnett's test. i. Dunnett's Test and calculations for numerical comarision of different treatments wth one control. In region R, where the potatoes were planted, it was this year very dry and rather bad conditions to grow potatoes prevailed during the experimental period. The results of this investigation show us that treatment No.2, 3 and 4 are significantly different from other treatments and control groups (none treated, just like natural state). Treatment no.2 is the useless mercury formulation. So only No. 3 and 4, which have high concentrations of antibiotic 'P', gave a good effect to the potatoes. As well as the competitors product, middle and low concentrated formulations are not significantly different from control gro-ups of every size. In region w, where the potatoes got the same treatments as in region R, prevailed better weather conditions and was enough water obtainable from the lake. The results in this region showed that treatment No. 2, 3, 4, and 5 are Significantly different from other treatments and the control groups. Again No.2 is the mercury treatmentin this investigation. Not only high concentrated formulation of antibiotic 'P', but also the competitor's poroduct gave good results. But, the effect of 'P', was better than the competitors porduct. In region G, where the potatoes got the same treatments as in the regions R and w. and the climate conditions were equal to region R, the results showed that most of the treatments are not significantly different from the control groups. Only treatment no. 3 was a little bit different from the others. but not Significantly different. It seems to us that the difference between the results in the three regions was caused by certain conditions like, the nature of the soil the degres of moisture and hours of sunshine, but we are not sure of that. As a conclusion, we can say that antibiotic 'P' has a good effect on potatoes, but in most investigations a rather high concentration of 'P' was required in formulations.

  • PDF

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

서버 클러스터 환경에서 자율학습기반의 에너지 효율적인 클러스터 관리 기법 (An Energy Efficient Cluster Management Method based on Autonomous Learning in a Server Cluster Environment)

  • 조성철;곽후근;정규식
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제4권6호
    • /
    • pp.185-196
    • /
    • 2015
  • 에너지 절감형 서버 클러스터는 에너지 절감을 고려하지 않는 기존 서버 클러스터에 비해 서비스 품질을 보장하면서 전력소비를 절감하는 것을 목표로 한다. 에너지 절감형 서버 클러스터에서는 현재의 부하를 처리하는 데 필요한 최소수의 서버들만 ON 하도록 고정 또는 가변 주기로 서버들의 전원모드를 조정한다. 이에 대한 기존 연구들은 전력 절감 또는 서비스 품질을 보장하려고 노력해왔지만 에너지 효율성을 잘 고려하지는 못했다. 본 논문에서는 에너지 절감형 클러스터에서 자율학습기반의 에너지 효율적인 클러스터 관리 기법을 제안한다. 자율학습을 통해 최적화된 파라미터들을 이용하여 전력 소모 대비 최고의 성능을 얻을 수 있도록 서버 전원모드를 조정한다. 제안방법은 서버 전원모드 조정을 위해 아래의 과정을 반복 수행한다. 첫째, 현재 부하 및 트래픽 패턴을 보고 현재 워크로드 패턴 유형을 사전에 정의한 대로 분류한다. 둘째, 학습 테이블을 탐색하여 해당 워크로드 패턴 유형에 대해 예전에 학습이 수행되었는지 확인한다. 만일 수행되었다면 이미 저장된 파라미터를 이용한다. 그렇지 않으면, 학습을 수행하여 에너지 효율성 관점에서 최고의 파라미터를 얻어 저장한다. 셋째, 얻어진 파라미터를 이용하여 서버 전원모드를 조정한다. 제안방법을 구현하여 16개의 서버 클러스터 환경에서 3가지 다른 부하 패턴들을 이용하여 실험을 수행하였다. 실험 결과는 제안방법의 에너지 효율성이 뛰어남을 보여주고 있다. 뱅킹 부하패턴, 실제 부하패턴, 가상 부하패턴 각각에 대하여, 제안방법의 단위전력당 good 응답 수가 기존의 정적 서버 전원모드 제어방법의 99.9%, 107.5%, 141.8%이고, 기존의 예측방법의 102.0%, 107.0%, 106.8%이다.

국가건강검진의 방사선검사 이용량 및 피폭선량 추정 (Estimated Exposure Dose and Usage of Radiological Examination of the National Health Screening)

  • 길종원;박종혁;박민희;박찬영;김소영;신동욱;김원동
    • Journal of Radiation Protection and Research
    • /
    • 제39권3호
    • /
    • pp.142-149
    • /
    • 2014
  • 한국은 국가건강검진을 시행하여 국민건강증진에 크게 기여하고 있으며 그 수검률 또한 증가하고 있다. 본 연구는 수검률 증가에 따른 방사선검사의 증가가 예상되어 그 이용 빈도(이용량)와 피폭선량을 파악하고자 한다. 본 연구는 2011년 국민건강보험공단 건강검진 분석 자료에서 방사선검사를 분리하여 이용량을 파악하고, UNSCEAR 2008년 보고서의 수록되어 있는 검사별 선량을 적용하여 국가건강검진에서 방사선검사로 인한 피폭선량을 추정한다. 주요 분석결과 2011년 국가건강검진 수검자 1인당 평균 피폭선량은 0.57 mSv로 추정되었고, 최대 11.081 mSv, 최소 0.02 mSv로 추정되었다. 방사선검사의 이용 빈도와 피폭선량은 각각 총 16,005,914건, 6,311.76 person-Sv로, 이중 이용량은 흉부 X선검사가 1,070,569 (69.17%)건으로 가장 높았고, 피폭선량은 위장조영검사가 5,217.94 (82.67%) person-Sv로 가장 높았다. 성 연령별 결과 39세 이하를 제외한 전 연령대에서 여성의 수검비율과 피폭선량이 높았고, 특히 50-54세 여성이 1,674,787 (10.5%)건, 701.59 (11.1%) person-Sv로 가장 높았다. 검사별 선량에서 위장조영검사가 전체 82.67%를 차지하는 만큼 의료상(목적) 반드시 시행하는 경우를 제외하고는 위장내시경검사를 선택하여 수검 받도록 정책적으로 장려하고 외국의 사례와 같이 경제성과 실효성 평가에 따라 폐지된다면 국가건강검진에의 방사선피폭은 현저히 줄어들 것으로 예상한다.

부가가치 제공 유형별 판매촉진과 유통업체 불확실성이 제품 가치 평가에 미치는 영향 - 사은품(Freebie) 제공 판매촉진을 중심으로 - (The Effect of Value-added Promotion and Retailer Uncertainty on Customers' Perceived Value of the Product)

  • 김향미;이소영;김재욱
    • 한국유통학회지:유통연구
    • /
    • 제16권1호
    • /
    • pp.117-140
    • /
    • 2011
  • 마케팅 연구에서 판매촉진은 지난 수십 년간 지속적으로 연구되어 온 분야중의 하나이다. 판매촉진은 소비자의 지각된 가치를 증가시키는 방법으로 크게 2가지 유형으로 나누어 볼 수 있는데, 첫째, 소비자에게 비용을 줄여주는 방법인 가격인하 판매촉진과 둘째, 소비자에게 혜택을 제공하여 전체적인 지각된 가치를 높여주는 부가가치 제공 판매촉진 방법이 그것이다. 그 동안의 판매촉진의 연구를 살펴보면 주로 가격할인 판매촉진을 중심으로 연구가 많이 이루어졌음을 알 수 있다. 그러나 최근 들어 부가가치 제공 판매촉진 방법에 관한 연구가 증가하고 있는 추세이다. 특히, 부가가치 제공 판매촉진 활동의 효과 평가, 적절한 부가가치 판매촉진 방법, 구매의도에 관한 연구가 많이 이루어졌음을 확인할 수 있다. 즉, 판매촉진 자체에 초점을 맞춘 연구가 대부분이었다. 본 연구는 부가가치적 판매촉진이 판매촉진 제품의 가치평가에 미치는 영향에 대해 살펴보고자 한다. 부가가치 판매촉진에 관심을 갖게 된 이유는 부가가치 판매촉진은 상황적인 요인에 의해 그 것이 혜택으로 지각될 수도 있지만 반드시 그렇지 않을 수도 있기 때문이다. 본 연구는 이러한 상황적 요인으로 사은품 제시 방법과 유통업체의 불확실성 수준이라는 2가지 요인이 판매촉진 제품의 가치평가에 미치는 영향을 알아보기 보기위해 실험과 준실험을 이용한 2가지 연구를 실시하였다. 먼저 실험은 2(사은품 제시방법; 통합제시 vs. 분리제시) *2(유통업체의 불확실성 수준(높음 vs. 낮음) *3(평가대상; 전체제품(본 제품+사은품), 본 제품, 사은품)로 집단 간 실험설계를 하였다. 그 결과 사은품을 통합 제시하는 경우가 분리 제시하는 경우에 비해 제품 가치 평가를 더 높게 하는 것으로 나타났으며, 유통업체 불확실성 수준이 높은 경우가 낮은 경우에 비해 전체 제품 가치 평가를 더 낮게 하는 것으로 나타났다. 이 두 요인의 상호작용을 살펴본 결과, 전체적으로 살펴보았을 때 상호작용은 유의미하게 나타나지 않았다. 하지만 보다 상세한 결과를 알아보기 위해 각각의 평가 대상별로 알아본 결과, 본 제품 평가에 있어서 유통업체 불확실성이 높은 경우에 통합 제시하는 경우가 분리제시 하는 경우에 비해 제품 가치를 더 낮게 평가하는 것으로 나타났다. 준실험인 연구 2는 연구 1의 결과를 재확인하기 위한 것으로 실제 시장에서 행해지고 있는 제품과 최근에 이용한 유통업체에 대해 평가하게 하였다. 그 결과 연구 1에서처럼 유통업체 불확실성이 높은 경우 제품 가치 평가를 더 낮게 하는 것으로 나타났다. 특히 연구 1에서 살펴보지 않았던 구매의도를 조사하였다. 부가가치 판매촉진 이전의 유보가격과 부가가치 판매촉진 자극물을 본 이후의 유보가격의 차이를 이용하여 2개의 집단으로 나눈 후, 구매의도를 비교한 결과 두 집단 간 구매의도에는 차이가 없는 것으로 나타났다. 본 연구 결과를 통해 유통업체 불확실성이 높은 경우, 사은품을 제공하는 것이 소비자에게 단순히 혜택으로 지각되는 것이 아니라 상술지각이 활성화되어 오히려 제품 평가에 부정적인 영향을 미치게 되며 구매를 망설이게 한다고 볼 수 있다.

  • PDF

구조분해분석을 통한 국내 산업별 에너지 소비 변화요인 연구 (Structural Decomposition Analysis on Changes in Industrial Energy Use in Korea, 1980~2000)

  • 김진수;허은녕
    • 자원ㆍ환경경제연구
    • /
    • 제14권2호
    • /
    • pp.257-290
    • /
    • 2005
  • 1980년~2000년의 기간 동안 우리나라의 산업부문 최종에너지 소비량은 수송 가정 상업 기타부문의 최종에너지 소비량에 비해 더욱 가파르게 상승하였으며 외환위기의 영향도 다른 에너지 소비부문에 비해 적게 받고 있는 것으로 나타나고 있다. 본 연구는 꾸준한 증가추세로 나타난 국내 산업부문의 에너지 소비량의 변화 요인 및 산업계의 에너지 저소비형 산업구조 구축을 위한 노력 여부를 산업별로 분석하기 위하여 Chen and Rose(1990)의 two-tier KLEM모형형 구조분해분석(Structural Decomposition Analysis)모형을 확장하여 총 17가지 요인으로 1980년~2000년의 기간 동안의 국내에너지 소비량의 변화를 분석하였다. 본 연구에서 사용한 산업 분류는 2000년도 산업연관표에서 석탄과 석탄제품, 연료유, 전력, 도시가스의 에너지 부문과 대분류를 기준으로 한 28개 산업부문으로 분류하였으며 개별 산업별로 분석함으로써 산업별 에너지소비구조 변화 요인을 확인하고 의미있는 소비구조 변화가 있었던 전기 전자 제조업, 건설업, 제1차금속 제조업을 대상으로 비교분석을 하였다. 분석결과 에너지를 많이 사용하는 산업인 제1차금속제품 제조업, 화학제품 제조업, 비금속광물제품 제조업 등이 1980년~2000년의 20년간 에너지 소비구조를 개선하기 위한 노력을 가장 많이 했다는 결과를 얻을 수 있었다. 이들 산업은 에너지, 재료의 생산성이나 중간수요 수입, 에너지간 대체, 재료간 대체 효과 등에서 고루 에너지 저소비구조로의 개선 노력이 보이고 있으므로 산업의 특성상 에너지 사용량이 많기는 하지만 에너지를 최대한 효율적으로 사용하기 위한 노력을 기울여 왔다고 할 수 있다. 또한 산업별로 에너지 소비량 변화요인의 패턴이 다르게 나타났으며 전기전자산업과 1차금속산업, 건설산업을 비교했을 경우 전기전자산업은 생산성을, 건설산업은 투입 구조를 에너지 저소비구조로 개선하기 위한 노력이 필요한 것으로 분석되었다. 본 연구를 통해 에너지 다소비산업이 에너지 소비구조를 개선하기 위하여 에너지 생산성과 에너지원 대체 요인을 중심으로 상당한 노력을 하였음을 알 수 있으며 산업별로 에너지 소비량 변화요인의 패턴이 다르므로 에너지소비절약을 위한 정책 역시 산업별로 이루어져야 함을 확인할 수 있다.

  • PDF

컴퓨터 및 스마트폰 사용이 근골격계질환으로 인한 업무능력 저하에 미치는 영향 : 근골격계 질환의 매개효과 (The Effect of using Computer & Smart-phone on Decreased Work Efficiency due to Musculoskeletal Disorders ; Mediating Effect of Perceived Musculoskeletal Disorders)

  • 박종호
    • 유통과학연구
    • /
    • 제14권3호
    • /
    • pp.55-62
    • /
    • 2016
  • Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.

전남지역 학교급식의 위생관리 실태 (Performance Status of Sanitary Management of School Food Service in the Jeonnam Area)

  • 고무석;정난희;이전옥
    • 한국가정과학회지
    • /
    • 제7권1호
    • /
    • pp.51-67
    • /
    • 2004
  • This study analyzed the effects of nutrition technicians' hygiene education on cooking workers' performance of hygiene management in order to ensure the security of school meals. The situation of cooking workers' disposition in subject schools was elementary school(51.1%) and middle school(48.9%) and the type of meals was rural area type(54.2%), urban type(36.5%). and island and isolated area type(9.3%). The methods of meals management were single cooking(88.2%) and joint cooking and management(11.8%). The type of distributing meals was distributing in a dining room(93.5%), in a classroom(3.7%), and in both dining room and classroom(2.8%). Nutrition technicians' employment form included regular(53.5%) and daily(88.2%). Their education was junior college graduate(50.2%), university graduate(44.8%). and graduate school students(5.0%). Cooking workers' employment form included daily(88.2%) and regular (11.1%). suggesting that most were regular. Most cooking workers(77.4%) had at least high school certificate. Regarding the situation of cooking workers' disposition in subject schools, the number of student per one cooking worker was found as 91-120(37.2%), 61-90(22.6%). 60 and under(21.l %). 121-15006.7%). and 151 and over(2.5%). Cooking workers' level of performance of hygiene management was post-working stage(66.37/75 marks), pre-working stage(64.22/75 marks). and working stage(20.34/25 marks), The counting of meals articles in a pre-working stage(20.34/25 marks). temperature and required time in a working stage(18.78/25 marks), and machinery equipment and hygiene in a pre-working stage(21.40/25 marks) showed lowest of performance, which suggest poor service of hygiene. Cooking workers' performance of hygiene management by working stage showed the significant difference with school class(p<.001), type of schools with meals(p<.05). state of cooking workers' employment(p<.001), and cooking worker's disposition(p<.05). A working stage showed the significant difference with type of schools with meals(p<.05). A post-working stage showed the significant difference according to type of schools with meals(p<.05), and the methods of meals management(p<.05), and cooking workers' disposition(p<.05). In the execution of hygiene education, individual hygiene was highest(94.8%), followed by the management of machinery equipment and tools(89.7%), food poisoning and microorganism(94.7%), and the method of food treatment(76.4%). A yearly plan of hygiene education included established(83.9%) and not established(l6.1%). Regular education included not executed(25.1%), 2-3 times a month(l6.1%), and more than 4 a month(4.0%) and occasional education was not executed(57.0%), 1-3 times a month(26.3%), and more than 4 a month(l5.7%). In the methods for hygiene education, oral education(95.7%) was used most, followed by demonstration(10.5%), poster/photo(10.5%), video/slide(3.7%), and computer(3.7%). Frequency of improvement and complement of hygiene education included once a month(56.3%), once a year(20.7%), by quarter(l1.5%), and every six months(1l.5%). Newspaper was used most in materials of hygiene education, followed by internet, TV, nutrition technician's reeducation, information exchange between members, educational office's training, and reference book, and educational office's material. and symposium. Cooking workers' assessment of the effect of hygiene education was conducted through observation(56.8%), check table(l5.2%), question(l4.0%), and examination(14.0%). The reason of cooking workers' low level of performance included habitual custom(53.9%), lack of understanding(20.4%), overwork(l4.6%), and lack of knowledge(l1.l%) and the reason of difficulty in hygiene education included lack of time(55.3%), lack of understanding(27.6%), lack of knowledge and information(8.7%), and lack of budget(48.0%).

  • PDF