• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1465-1469
• /
• 2013

The resent developed high speed train called HEMU-430X (Highspeed Electric Multiple Unit - 430km/h eXperiment) recorded a 421.4 km/h in Kyoungbu high speed line in Korea. A verity of measurement systems are used to check the performance between pantograph and catenary system. An innovative measurement system is adopted to check the current of catenary wire in the track side during HEMU-430X test running. This paper presents the measurement results of catenary current in kyoungbu high-speed line and describe its utilizing technology in the experimental results of catenary current. In order to analyze field testing results, the current ratio between contact and catenary current have been analyzed by means of Carson-Pollaczek equation. And the current wave forms between catenary and contact wire are presented based on the simulation results.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.279-282
• /
• 2005

A real-time measurement and control system was developed, This system is used for nurses at hospitals to check the residual quantity and changing time of Ringer's solution in nurses' room. Load Cell is utilized as a sensor to check the residual quantity of Ringer's solution, This Load Cell detects the physical changes of Ringer's solution and transfers electronic signal to the amplifier. Amplified analog signal is converted into digital signal by NO converter. Developed Embedded system, which computes these data with microprocess(8052) then makes it possible to monitor the residual quantity of Ringer's solution real-time on a server computer. A Checking system on Residual Quantity of Ringer's Solution Using Load cell cut costs using a simple design for a circuit

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.11-18
• /
• 2011

This study developed a digital security device which power is on/off by the RFID card. This device is based on the wireless data transmit/receive circuits, built in RS-232C chip and applied to computer and other digital devices. We can check whether this device is operated or not by connecting the LED. In this system, 13.56MHz frequency circuit supplies power with ID card, and DC inputs check the proximity operating distance of the card field for verifying the existence of a card. The security level of this system is much stronger than that of a compared system[13]. Anyone cannot use the system without RFID card. All illegal access is prevented except for authorized path.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1245-1251
• /
• 2013

This study has focused on development of ELID monitoring system and its application to ELID grinding of structural ceramics. ELID monitoring system was consisted of grinding equipment, ELID power supply, grinding wheel, electrode and monitoring program. It can give a real time data to check spindle grinding resistance, wheel revolution, dressing current and voltage in ELID grinding process. The performance of developed system was evaluated by applying to grinding of structural ceramics, silicon carbide and alumina. As the results of experiments, monitored data for spindle resistance and ELID dressing current was useful to check steady-state ELID grinding process. From the comparison of spindle resistance between ELID grinding and conventional grinding process according to change of depth of cut, it could be confirmed that the spindle resistance in ELID grinding was lower than conventional grinding process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1423-1428
• /
• 2012

In this paper, we investigated an implementation of anti-fire monitoring system based on the RS-485 communication to support local area coverage within a range of 1 Km range. We developed a Multi Point Communication Protocol supporting input/output information processing and control up to 8128 terminal check points, which provides an interface between the anti-fire monitoring system receiver and multiplex transponders. Additionally, a multiplex transponders controller has been designed for the implemented system to comply with the government regulation on fire protection, especially to monitor, report and control 1016 terminal check points within the time limit.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.127-134
• /
• 2013

While there are many services that can check current traffic condition and application program such as bus arrival alarm are developed, since it only provide simple alarm and check level of information, it is still insufficient in many senses. Therefore, the program that try to develop in this study is the system that predict arrival time to destination and inform the bus passengers by applying real time traffic information. The system developed related to this study is still very inadequate. In the system developed in this thesis, when the user input the current bus number and destination using smart-phone, relevant server acquire the bus route information from bus information DB, and analyze real time traffic information based on the information from traffic information DB, and inform customer of expected arrival time to destination. In this thesis, traffic congestion can be eased off and regular operation of public transportation can be improved with reliable destination arrival alarm. Also, it is considered that pattern of bus users can be analyzed by using these information, and analyzing average transport speed and time of public transportation, travel time depending on various situation can give a boost to study related to transportation information and its development.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.174-182
• /
• 1999

This paper describes a research work of developing a computer-aided design of product with bending constraints and piercing for progressive working. an approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, availability of press. Strip layout drawing generated by piercing with punch profiles divide into automatically for external area is shown into graphic forms, including bending sequences for the product with piercing and bending constraints. Results obtained using the modules enable the designer and manufacturer of piercing and bending dies to be more efficient in this field.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.459-470
• /
• 2021

This paper presents a low-cost prototype for monitoring online the maximum power produced by a domestic photovoltaic (PV) system using Internet of Things (IoT) technology. The most common tracking algorithms (P&O, InCond, HC, VSS InCond, and FL) were first simulated using MATLAB/Simulink and then implemented in a low-cost microcontroller (Arduino). The current, voltage, load current, load voltage, power at the maximum power point, duty cycle, module temperature, and in-plane solar irradiance are monitored. Using IoT technology, users can check in real time the change in power produced by their installation anywhere and anytime without additional effort or cost. The designed prototype is suitable for domestic PV applications, particularly at remote sites. It can also help users check online whether any abnormality has happened in their system based simply on the variation in the produced maximum power. Experimental results show that the system performs well. Moreover, the prototype is easy to implement, low in cost, saves time, and minimizes human effort. The developed monitoring system could be extended by integrating fault detection and diagnosis algorithms.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.181-184
• /
• 2013

의료기술이 나날이 발전해 감에 따라 인류의 평균수명이 늘어나고 건강한 삶에 대한 관심도 늘어가고 있으나 여전히 사각지대가 남아있다. 영유아나 고령/특정 질병으로 몸이 불편한 가족이 있는 이들을 위하여 복잡한 장비가 필요 없이 쉽게 구비할 수 있는 장비들을 이용하여 많은 비용을 쓰지 않고도 환자의 상태를 언제 어디서나 파악 가능한 시스템이 필요하다.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.619-621
• /
• 2009

In this letter, we study the influence of receiver imperfections on bit error rate (BER) degradations in detecting low-density parity-check coded multilevel phase-shift keying signals transmitted over a Rician fading channel. Based on the analytical system model which we previously developed using Monte Carlo simulations, we determine the BER degradations caused by the simultaneous influences of stochastic phase error, quadrature error, in-phase-quadrature mismatch, and the fading severity.