• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1053-1059
• /
• 2009

In this study, slope hazards mitigation methods for a natural terrain are systematically classified to survey the mitigation methods and develop a data base system. Also, field survey sheets which can be recorded the features of mitigation methods installed in the natural slope are developed. The slope hazards mitigation methods in the natural slope are classified as hillside part method and valley part method. The slope part sheet and the valley part sheet are also drawn up for field survey. As the result of the filed survey of mitigation methods about 50 points in Muju and Jangsu area, grass painting and slope covering methods are dominant in case of slopes part. In case of valley part, slit dam, concrete check dam and slope foot barrier are applied simultaneously.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.135-141
• /
• 2012

Development of the Internet has brought many changes in methods of education and assesment. When enforcing the on-line distance education, the tests to check the outcomes of the learning are taken on the Internet. The current trends of education evaluation are focused on the types of questions and the detachments of exam proctor but verifying the authentication of answer sheet. There are several forms to make answers; selection type, short-answer type, write-out answer type, practical exercise type, etc. All the forms can be done on the Internet except the practical exercise type because the source of the examinee's answer sheet is unreliable. In this paper, we made the verification system to solve the doubt by setting the proved information on the answer sheet. Putting the information down to confirm the authenticity during the exam on the server is distinct character of this system. After the test finished, the system will operate when examinee turn in the answer sheet.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.247-250
• /
• 2007

Flexible media such as the paper, the film, etc. are thin, light and very flexible. They behave in geometrically nonlinear. Any of small force makes large deformation. So we must including aerodynamic effect when its behavior is predicted. Thus, it becomes fully coupled fluid-structure interaction(FSI) problem. In FSI problems, where the fluid mesh near the structure undergoes large deformations and becomes unacceptably distorted, which drive the time step to a very small value for explicit calculations, the arbitrary Lagrangian-Eulerian(ALE) methods or rezoning are used to create a new undistorted mesh for the fluid domain, which allows the calculations to continue. In this paper, FE sheet model considering geometric nonlinearity is formulated to simulate the behavior of the flexible media. Aerodynamic force to the media by surrounding air is calculated by solving the incompressible Navier-Stokes equations. Q2Q1(Taylor-Hood) element which means biquadratic for velocity and bilinear for pressure is used for fluid domain. Q2Q1 element satisfies LBB condition and any stabilization technique is not needed. In this paper, cantilevered sheet in the viscous incompressible Navier-Stokes flow is simulated to check the mesh motion and numerical integration scheme, and then falling paper in the air is simulated and the effects of some representative parameters are investigated.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.507-519
• /
• 1999

An approach using the energy method has veen proposed for the analysis of cone spinning having the complicated deformation modes mixed by shear and normal deformation. In the proposed method, the corresponding solution is found through optimization of the total energy dissipation with respect to the parameters assumed by the velocity field defined as the variation of the length in longitudinal direction. The sheet blank is divided into three layers to consider the bending effect and the energy dissipated by shear deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation of axi-symmetric sheet element for the evaluation of total deformation energy. In order to check the validity of the proposed method, the complex spinning for making the conical cup is analyzed and the computed results are compared with the experimental results. In comparison of the computed results with existing experimental results,, the good agreement is obtained for the variation of outer radius and the distribution of thickness, and it has thus been shown that the present approach is applicable to the analysis of complex spinning.

• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.345-377
• /
• 2013

Government agencies have many difficulties for the information system development and operation. One of the difficulties is a budget estimation. Each government agency suggests individually different estimation for the personnel expenses and IT infrastructure adoption costs in the same field of informatization promotions. The other one is the operation costs are increased exponentially in every year[42, 51]. Those difficulties make government agencies can not help adopting SaaS. In fact, most of IT consulting company and government agencies already recognized a variety of SaaS advantages. The most typical SaaS's advantages are cost reduction, Software rapid development and deployment. However, once government agencies decide to adopt SaaS, they can not avoid many problems and difficulties. There is no information in a detailed item in a budget. In those kinds of situation, there is no choice whether government agencies accept SaaS provider's suggesting adoption costs or not. Thus, we provide a sheet of SaaS adoption cost estimation to government agencies. To know the cost factors, this study uses TCO(Total Cost of Ownership)'s criteria. To give a management point, this study uses Gartner's Application development Life Cycle. In this study, the integration check framework which is SaaS adoption cost estimation makes government agencies possible to establish a adequate budget.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.16-23
• /
• 2003

In most organizations, the relational DBMS was used for store and manage XML documents due to the pre-established relational DBMS. But, relational DBMS has some problems. They has the possibilities of informational loses in the process of mapping the structure of XML documents to RDB, and they require expensive cost to reflect all XML properties. Thus, this paper was intended to design and implement XML document management system which utilize O2 DBMS-object oriented DBMS in order to overcome the existing problem and reflect all XML Properties. The XML document management system purposed in this thesis has multiple function, such as the library service function for XML documents-check-in/check-out, versioning, user access management-, dynamic indexing and retrieval, and publishing function using style sheet.

• Journal of Preventive Medicine and Public Health
• /
• v.2 no.1
• /
• pp.81-87
• /
• 1969

Three Combinations of cloths were evaluated for the protective effects of different kinds of clothings in cold environments. Table 1 shows the components of the three models of clothings. A prototype was made by putting a sheet of vinyl at the middle layer of raw cotton in a fabric-quilt cloths. A glove mannequin was covered by each of these cloths. The globes contained 1,000 cc of hot water about $40^{\circ}C$. Tele-thermistors were fixed in order to check the temperature of cloths space and water temperature for evaluation of calorie-loss and climate of clothings. Results are summarized as follows: 1) Without wind, there is no significant difference of air temperatures between sti-parka and quilt-wear clothing. 2) The prototype with vinyl sheet best protects against wind, the next is the ski-parka. Quilt-wear protects the least. 3) It is well-known that a working-clothing needs not have any separate liners nor outers. 4) For innermost layer of a clothing preventing cold, a cotton-fabrics is recommended and a water-proof cloths for outer layer. 5) Heat-loss was calculated from the cooling degrees of water. Calorie-loss was $910cal/m^2/hr$. when bared, but with the prototype of vinyl sheets the calorie-loss was $350cal/m^2/hr$. (38.5% of bared). Quilt-wear and ski-parka were 380(41.8%) and $440cal/m^2/hr$. (48.4%) respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.5
• /
• pp.60-66
• /
• 2002

The military services have sought to improve the overall quality, management, and delivery of military technical information in all of its aspects. The efforts concentrated on developing IETM(Interactive Electronic Technical Manual) by using the application of computer technology for the storage, control, and presentation of maintenance, system-operation, training, and other forms of logistic-support technical information. In this paper, the methodologies are presented to evaluate the operational effectiveness of IETM which consists of confirmity and performance. Confirmity is evaluated by the check-sheet based on the standard of CALS, and performance by the comparison of the technician performance between IETM and paper-TM.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region. This paper analysis the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counter plan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. For behavior, the test has been for risk Point of work place and infra worker movement, also the workers performed professional work as classify according to work. For judgement, the valuation sheet is reflected to minimize the human-error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.