• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.573-578
• /
• 2003

In this study, new type of induction charging system for electrostatic spraying was manufactured and proposed to improve the electrical safety and charging efficiency. And parameters of proposed system to generate the maximum deposition current with electrical safety were selected and investigated. The selected parameters were frequency of square pulse and thickness of insulation material, outer diameter of device and thickness and positions of electrode. Charging quantity of water drop was measured by deposition current detected from sensing plate indirectly. The maximum deposition current for each parameter were 3.5[uA] at the frequency of 15[kHz] and thickness of 0.25[mm] insulating layer. And maximum deposition currents were 2.8[uA] and 3.0[uA] at 25[mm] outer diameter of charging device and 0.25[mm] thickness of electrode each. Effects of electrode position from spraying nozzle on deposition current was a little.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.25-28
• /
• 2021

In this paper, we studied smart phone RF wireless charging with 5.8-GHz microwave wireless power receiver. The dc output of the receiver connected to super capacitor and DC-DC converter for charging a smart phone. This configuration stably supplies 5V and current for charging it. Studies show that the more receivers are used at close range, the higher the received voltage values and the larger the capacity of the super capacitor, the longer the charging time. The present 5.8-GHz 1W wireless power transmission system is not enough for charging a smartphone mainly due to the lack of current of the receiver.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.215-217
• /
• 2007

This paper proposes the method to improve the charging speed of high voltage capacitor used in the portable medical device. The feedback control method with microprocessor was used to detect charging time and control charging voltage. The result shows that the proposed method is more efficient than only voltage check method with typical charging sequence control.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.455-459
• /
• 2018

In this paper, proposed a multi-channel charging control strategy for electric vehicle. This control strategy can adjust the charging power according to the calculated state-of-charge (SOC). Electric vehicle (EV) charging system using Particle Swarm Optimization (PSO) algorithm is proposed. A stochastic optimization algorithm technique such as PSO in the time-of-use (TOU) price used for the energy cost minimization. Simulation results show that the energy cost can be reduced using proposed method.

• 대한교통학회지
• /
• 제35권3호
• /
• pp.210-219
• /
• 2017

친환경 교통수단으로 주목받고 있는 전기자동차는 우리나라에서도 2011년부터 지속적으로 보급대수가 증가하고 있다. 전기자동차 보급에 따라 충전 인프라 확대를 위하여 본 논문에서는 전기자동차 보급률이 높고 충전인프라가 비교적 잘 구축되어 있는 제주도 사례를 바탕으로 충전소 이용행태를 분석하여 기존 충전소의 효율적 운영방안과 추가적인 충전시설 설치 시 고려할 요소에 대하여 분석하고자 하였다. 전기자동차 충전소가 있는 읍면동별 급속충전기와 완속충전기 이용특성과 시설의 유형에 따라 시간대별 이용특성을 분석하였다. 제주도에 설치된 충전기의 이용 빈도를 분석한 결과, 급속충전기와 완속충전기 이용 빈도 모두 특정지역에 편중된 이용률이 나타났다. 유형별 충전소 이용은 급속충전기와 완속충전기 모두 업무시설과 공영주차장에 설치된 충전기 이용률이 높았으나, 시간대별 이용률을 보면 급속충전기는 오후시간 전반에 걸쳐 이용률이 높은 반면, 완속충전기 이용은 오전시간에 집중되어 있었다. 이러한 이용특성을 반영하여 이용자들이 전기자동차 충전소를 효율적으로 이용할 수 있도록 이용률이 낮은 충전소를 안내하는 홍보방안과 충전기를 이용할 때에 주의사항 및 충전완료 알림서비스 등을 제공하는 것이 필요할 것이다. 또한, 아직 충전기가 설치되지 않은 지역을 충전기 설치대상지역으로 고려하고, 이에 더불어 충전기 이용률이 높은 지역과 시설에 추가 설치가 이루어져야 한다. 실제 전기자동차 충전행태 분석 결과를 활용하여 실질적인 서비스 향상이 가능할 것으로 기대된다.

• 대한임베디드공학회논문지
• /
• 제7권2호
• /
• pp.95-101
• /
• 2012

In order to supply emotion service depending on user's emotional change in a mobile environment, various researches have been carried. This paper discusses a protocol for wireless charging and an embedded platform of the mobile emotional sensing device which supports that. Wireless charging process relieves user's vexatious task to charge the emotional sensing device. To support wireless charging, there are one basestation and several mobile devices. Basestation coordinates and controls the devices over wireless communication, as well as supplies energy. For 1:N communication we defines the network whose superframe is classified into four categories: a network join superframe, a charging request superframe, a charging superframe and an inactive superframe. Physical layer provides how to supply energy to the devices and communicate physically. Mobile device is equipped with energy charged circuits, which correspond with the defined energy supplying method, as well as bidirectional communication circuits. Mobile device monitors and analyzes its own battery status, and is able to send a request packet to basestation. Therefore, it can be charged before its battery is exhausted without user's perception.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.451-458
• /
• 2017

An Electric Vehicle (EV) is operated with the electric energy of a battery in place of conventional fossil fuels. Thus, a suitable charging infrastructure must be provided to expand the use of electric vehicles. Because the battery of an EV must be charged to operate the EV, expanding the number of EVs will have a significant influence on the power supply and demand. Therefore, to maintain the balance of power supply and demand, it is important to be able to predict the numbers of charging EVs and monitor the events that occur in the distribution system. In this paper, we predict the hourly charging rate of electric vehicles using transformation matrix, which can describe all behaviors such as resting, charging, and driving of the EVs. Simulation with transformation matrix in a specific region provides statistical results using the Monte-Carlo Method.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1789-1797
• /
• 2017

It is necessary to charge electric vehicles in order to drive them. Thus, it is essential to have electric vehicle charging facilities in place. In the case of a household battery charger, the power similar to that consumed by a household with a basic contract power of 3kW is consumed. In addition, many consumers who own an electric vehicle will charge their vehicles at the same time. The simultaneous charging of electric vehicles will cause the load to increase, which then will lead to the imbalance of supply and demand in the distribution system. Thus, a smart charging scheme for electric vehicles is an essential element. In this paper, simulated conditions were set up using real data relating to Korea in order to design a smart charging technique suitable for the actual situation. The simulated conditions were used to present a smart charging technique for electric vehicles that disperses electric vehicles being charged simultaneously. The EVs and Smart Charging Technique are modeled using the Electro Magnetic Transients Program (EMTP).

• 대한전자공학회논문지TC
• /
• 제41권3호
• /
• pp.179-179
• /
• 2004

가까운 미래에 우리는 기존의 정액제 요금에서 종량제가 첨가되는 것과 같은 인터넷서비스의 요금체계에 변화를 맞이할 것이다. 본 논문은 이와 같은 움직임에 대비하여 차세대 네트워크에서 서비스품질이 보장되는 인터넷 서비스에 대한 사용량기반의 과금체계를 제안하고자 한다. 먼저, IP 네트워크에서 가장 주류를 이룰 Assured service에 의해서 발생되는 적응성이 있는 트래픽의 특성을 살펴보고, 이어서 네트워크 대역의 사용량에 기반한 과금방안을 제안한다. 그리고, 어떤 형태의 Assured service에도 적용 가능한 과금함수를 제안하고, 간단한 수치계산을 통하여 제안하는 방법의 유효성에 대하여 기술한다.

• 대한전자공학회논문지TC
• /
• 제41권3호
• /
• pp.21-28
• /
• 2004

가까운 미래에 우리는 기존의 정액제 요금에서 종량제가 첨가되는 것과 같은 인터넷서비스의 요금체계에 변화를 맞이할 것이다. 본 논문은 이와 같은 움직임에 대비하여 차세대 네트워크에서 서비스품질이 보장되는 인터넷 서비스에 대한 사용량기반의 과금체계를 제안하고자 한다. 먼저, IP 네트워크에서 가장 주류를 이룰 Assured service에 의해서 발생되는 적응성이 있는 트래픽의 특성을 살펴보고, 이어서 네트워크 대역의 사용량에 기반한 과금방안을 제안한다. 그리고, 어떤 형태의 Assured service에도 적용 가능한 과금함수를 제안하고, 간단한 수치계산을 통하여 제안하는 방법의 유효성에 대하여 기술한다.