• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1491-1494
• /
• 2011

Lithium vanadium phosphate, $Li_3V_2(PO_4)_3$ was prepared by a simple solid state route. It was found that making a fine powder of $Li_3V_2(PO_4)_3$ by the mechanical milling is very effective for increasing the insertion/extraction of lithium from $Li_3V_2(PO_4)_3$ structure. In charge/discharge test, the ball-milled $Li_3V_2(PO_4)_3$ sample exhibited a higher initial discharge capacity of 174 mAh/g in the voltage range of 3.0-4.8 V, compared with pure $Li_3V_2(PO_4)_3$ sample (152 mAh/g). Furthermore, the ball-milled $Li_3V_2(PO_4)_3$ presented not only higher cycle retention rate after 50 cycles, but also better rate capability compared with pure sample in the whole region (0.1-7 C).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.20-27
• /
• 2014

The power consumption pattern of high-speed railway has rarely during night time. But, during service time, the power is consumed irregularly related to train operation. Especially certain unusual about 1-2 days of service time interval to indicate the power consumption is rapidly growing phenomenon, which causes the capacity of the power contract is the annual electricity bill to rise rapidly as the cause. Normally, amount of peak power consumption bill rate at railway substation is over 20% of total electrical bill. Therefore, high-speed railway substation is expected to be considerably larger savings by reducing the peak power of the default charge(demand power).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.181.1-181.1
• /
• 2014

Supercapacitor is attracting growing attention for a promising energy conversion and storage device because of its desirable electrochemical properties such as rapid charge-discharge rate, high power density and long cycle life. Three-dimensional (3D) metal nanostructure has been widely studied since it can provide efficient charge transport along the 3D network in many device applications. In this work, we fabricated well-ordered 3D nickel (Ni) nanostructures using 3D-arrayed polystyrene nano-opal substrates. We also fabricated half-cell supercapacitors by electrodepositing $RuO_2$ onto these nanostructured Ni current collectors and investigated their morphological and electrochemical properties.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.93-101
• /
• 1998

This study was carried out to investigate and analyze the citizen's attitude for the issue of the municipal solid wastes in Miryang city. The waste generation rate was decreased by 56% compared with 1991, and 71.8% of generated wastes were treated by landfill method. 61.6% among respondents were contacted waste problem by TV and the majority of respondents felt seriousness of food-waste problem. The majority of people felt that waste discharge decreased after "volume-base charge system" and 71% of total respondents were burdened down with use of volume-base charge envelope. The greater part of citizens answered that they experienced damage due to wastes and satisfied with the collection system but they recognized the necessity of the establishment of collection system and increase of cleaners must be nessary.

• Carbon letters
• /
• v.11 no.4
• /
• pp.343-346
• /
• 2010

The various expanded graphites (EGs) was prepared and applied as anode material for high power Li-ion secondary battery (LIB). By changing the processing conditions of EG, a series of EG with different structure were produced, showing the changed electrochemical properties. The charge-discharge test showed that the initial reversible capacity of EG anodes prepared at the suitable conditions was over 400 mAh/g and the charge capacity at 5 C-rate was 83.2 mAh/g. These values demonstrated the much improved electrochemical properties as compared with those for the graphite anode of 360 mAh/g and 19.4 mAh/g, respectively, showing the possibility of EG anode materials for high power LIB.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.218-221
• /
• 1985

Transient charging and discharging currents as well as space charge limited currents have been measured in biaxially stretched poly(vinylidene fluoride) film under various poling fields and temperatures. At low temperatures and short poling times, the I-V characteristics showed shallow trap behavior. When the current values extrapolated to the infinite time, the I-V characteristics indicate that the distribution of the trap energy levels is uniform or very broad. The abnormal suppression of current at higher poling voltages and the high discharge rate observed also in the same voltage range are attributed to the morphological changes due to dipole reorientation.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.88-92
• /
• 2023

Lithium-ion batteries are actively used in various industrial sites such as field robots, drones, and electric vehicles due to their high energy efficiency, light weight, long life span, and low self-discharge rate. When using a lithium-ion battery in a field, it is important to accurately estimate the SoC (State of Charge) of batteries to prevent damage. In recent years, SoC estimation using data-based artificial neural networks has been in the spotlight, but it has been difficult to deploy in the embedded board environment at the actual site because the computation is heavy and complex. To solve this problem, neural network lightening technologies such as network pruning have recently attracted attention. When pruning a neural network, the performance varies depending on which layer and how much pruning is performed. In this paper, we introduce an optimized pruning technique by improving the existing pruning method, and perform a comparative experiment to analyze the results.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.58-59
• /
• 2011

본 논문은 전류에 따른 NiMH 배터리의 성능 변화를 충 방전 실험을 통하여 비교 분석하였다. 따라서 실험을 통하여 NiMH 배터리의 데이터시트에 있는 충 방전 특성곡선과 실제 실험을 통한 충 방전 특성곡선을 비교 분석한다. 또한 충 방전 전류의 크기에 따라 변하는 특성곡선의 차이를 비교 분석한다. 전류 변화에 의한 배터리 분석을 위해 0.2C, 0.5C, 1C, 2C 정전류 충 방전 실험과 동일한 C-rate로 펄스전류로 충 방전 실험을 하였다. 실험을 통해서 얻은 데이터로 1차 Randles 등가회로를 통해 C-rate변화와 잔존용량 변화에 의한 파라미터 분석과 잔존용량-개로전압 곡선에서의 충 방전 히스테리시스를 알아보았다.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.3
• /
• pp.136-142
• /
• 2011

$Li_4Ti_5O_{12}$ is prepared through a solid-state reaction between $Li_2CO_3$ and anatase $TiO_2$ for applications in lithium-ion batteries. The rate capability is measured and the electrode polarization is analyzed through the galvanostatic intermittent titration technique (GITT). The rate characteristics and electrode polarization are highly sensitive to the amount of carbon loading. Polarization of the $Li_4Ti_5O_{12}$ electrode continuously increases as the reaction proceeds in both the charge and discharge processes. This relation indicates that both electron conduction and lithium diffusion are significant factors in the polarization of the electrode. The transition metal (Cu, Ni, Fe) ion added during the synthesis of $Li_4Ti_5O_{12}$ for improving the electrical conductivity also greatly enhances the rate capability.

• Applied Science and Convergence Technology
• /
• v.24 no.1
• /
• pp.16-21
• /
• 2015

The characteristics of an atmospheric pressure plasma jet (APPJ) in He discharge are measured with electrical and optical diagnostics methods. The discharge phenomenon in one cycle of the APPJ was diagnosed using intensified charge coupled device (ICCD) imaging. The gate mode images show that the propagation of plasma bullets happens only when the applied voltage on the inner conductor is positive. Moreover, the Schlieren image of the plasma jet shows that the laminar flow is changed into a turbulent flow when the plasma jet is turned on, especially when the gas flow rate increases.