• 제목/요약/키워드: Charge transfer efficiency

검색결과 126건 처리시간 0.019초

안트라퀴논과 템포 활물질 기반 수계 유기 레독스 흐름 전지에서의 멤브레인 효과 (The Effects of Different Membranes on the Performance of Aqueous Organic Redox Flow Battery Using Anthraquinone and TEMPO Redox Couple)

  • 이원미;권용재
    • Korean Chemical Engineering Research
    • /
    • 제57권5호
    • /
    • pp.695-700
    • /
    • 2019
  • 본 연구에서는 유기물인 안트라퀴논(AQDS)와 템포(TEMPO)를 활물질로 사용하고 N 중성 전해질 기반 수계 유기레독스 흐름전지 성능이 멤브레인에 따라 어떻게 영향을 받는지 분석하였다. 안트라퀴논과 템포 모두 중성 전해질인 염화칼륨(KCl) 전해질에 대해 높은 전자전달성(0.068 V의 산화 반응 및 환원 반응의 피크 전위차) 및 셀전압(1.17 V)을 얻을 수 있었다. 성능비교를 위해 사용한 멤브레인으로, 상용 양이온 교환막 중 하나인 Nafion 212를 사용하였을 때, 0.1 M 활물질을 1 M 염화칼륨 전해질에 용해해서 작동한 레독스 흐름전지 완전지 테스트를 통해, 전류효율 97%, 전압 효율 59%의 성능을 나타내었지만, 방전 용량(discharge capacity)은 4 사이클에서 $0.93Ah{\cdot}L^{-1}$로 이론 용량($2.68Ah{\cdot}L^{-1}$)의 35%를 도달하였으며, 총 10사이클 동안 방전 용량의 용량 손실율(capacity loss rate)은 $0.018Ah{\cdot}L^{-1}/cycle$ 이다. 그 외에도 Nafion 117 멤브레인, SELEMION CSO 멤브레인을 사용하여 단전지 성능을 테스트하였을 때, 오히려 저항 증가 및 투과 유도로 인해 더 큰 용량 손실을 이끌었다.

3 kW 무선 전력전송을 위한 전력 변환기 회로 특성 (The Power Converter Circuit Characteristics for 3 kW Wireless Power Transmission)

  • 황락훈;나승권;김진선;강진희
    • 한국항행학회논문지
    • /
    • 제24권6호
    • /
    • pp.566-572
    • /
    • 2020
  • 무선 전력전송기에서 두 유도 코일 사이의 무선 전력전송 특성과 영향에 대해서 알아보고, 무선 전력전송 기술을 이용한 전력변환기 회로와 배터리 충·방전기 회로를 제안한다. 무선 전력전송기 및 무선 충전기의 장점은 기존의 플러그인 탑재형 유선 충전기(OBC; on-board charger) 대신 무선으로 전력을 전송하여 배터리에 전력 충전 시 사용자가 외부에서 전원을 연결 시키지 않고 무선으로 충전할 수 있는 점이다. 또한 무선충전의 이점은 2차 측 정류기의 회로와 수신 코일을 사용하여 에너지 효율 향상 효과를 가져올 수 있으나, 대용량의 원거리 무선충전 방식은 전송거리에 대한 한계가 있어 현재 많은 연구가 진행되고 있다. 비 접촉 방식의 전력 전송기의 전력을 전송 할 수 있는 송신부 인 1차측 코일과 수신부인 2차측 코일 및 하프브리지(half bridge) 직렬공진 컨버터를 적용한 무선 전력전송장치의 송신부 회로와 수신부 회로의 연구를 목적으로 무선충전시스템의 전력전송거리 향상을 위한 새로운 토폴로지를 적용하고, 각각의 거리에 따른 실험을 통해 8 cm 전송거리에서 출력 3 kW 일 때, 최대 효율(95.8%)을 확인 할 수 있었다.

전기화학적 기법에 의한 미생물연료전지 내부저항 특성 파악 및 전력관리시스템 연계 전압 변화와 유기물 저감에 미치는 영향 (Identification of Internal Resistance of Microbial Fuel Cell by Electrochemical Technique and Its Effect on Voltage Change and Organic Matter Reduction Associated with Power Management System)

  • 장재경;박혜민;김태영;양윤석;여정진;강석원;백이;권진경
    • 대한의용생체공학회:의공학회지
    • /
    • 제39권5호
    • /
    • pp.220-228
    • /
    • 2018
  • The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

응급환자의 방사선영상검사 분포 및 Patient Care (The Distribution and Patient Care in Radiography for Emergency Outpatients)

  • 이환형;강원한
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제19권1호
    • /
    • pp.55-74
    • /
    • 1996
  • This study was carried out to improve service efficiency and to cope with a emergency situation in emergency radiography, through analysis of the radiographic distribution and literature cited about emergency care. Data collection of radiographic distribution was surveyed for 761 emergency outpatients who visit during JAN, 1994 at ER of the general hospital in Pusan city. The results is as follows: Emergency radiography rate of simple radiography was 61.1 %, special radiography 2.5 %, CT 12.6 %, and ultrasonography 6.7 %. In simple radiography rate, a high rate was distributed on male(63.6 %), thoracicsurgery part(90.0%), admission patient(74.9 %), and long stayed patient at ER. In special raiography rate, a high rate was observed in urologic part(28.6%), and in CT rate, observed neurosurgery part(49.2 %) and neurologic part(36.7%). Ultrasonography rate was high for female(8.8 %) and internal medicine part(15.9 %). There are distributed regional radiography rate in radiographic type that chest(55.3 %) is high in the simple radiography, urinary system(1.2%) in the special study, and brain(40.0 %) in the CT. Regional radiography rate according to diagnostic department also was showed highly for head(64.6%) in neurosurgery, chest(90.0%) in thoracic-surgery, abdomen(58.0%) in general-surgery, spine (40.0% ) in neuro-surgery, and pelvis(15.9%), upper extrimity(20.5%), and lower extrimity(31.8%) in orthopedic-surgery each. Mean radiographic case number per patient of simple radiography was sinificant on sex, age, transfer relation in both total and radiographic patients(p<0.05). Mean radiographic case number was highly distributed on male(2.2 case number) in sex, on thirties(2.7) in age, transfered patient(2.7) in patient type, and on neurosurgery(3.4) in diagnostic charged part. Total radiographic case number in regional part was highly distributed on chest(499 case number). Considering the above results, emergency radiographer should take care of the elder patient in emergency radiography and get hold of injury mechanism to decrease possible secondary injury during radiography. Because of high radiography rate of urinary system in special study, radiographer should know well about dealing with contrastmedia administration and related instrument. All radiographer who take charge emergency patient should cope with a emergency situation during radiography, Because head trauma patients is very important in patient care, especilly in CT at night, charged doctor should be always silted with CT room and monitoring-patient. Radiography was reqested by many diagnostic department in ER. Considering that rate of simple radiography is high, special room for emergency radiography should be established in ER area, and the radiographer of this room should be stationed radiologic technician who is career and can implement emergency patient care.

  • PDF

프로세스 마이닝을 이용한 군수품 계약업무 분석 : 공군 군수사 계약업무를 중심으로 (Analysis of Munitions Contract Work Using Process Mining)

  • 주용선;김수환
    • 지능정보연구
    • /
    • 제28권4호
    • /
    • pp.41-59
    • /
    • 2022
  • 군수물자의 적기 조달은 군의 작전능력 유지를 위해서 필수적이며, 계약업무는 적기 조달을 위한 첫 단추라고 할 수 있다. 또한 신속한 계약체결은 수요자의 여유로운 납기설정을 가능케 하며, 예산 집행의 가능성을 높여주기 때문에 예산의 조기집행과 이·불용 방지를 위해서도 계약 프로세스 개선이 필수적이다. 최근 빅데이터를 이용한 연구가 여러 분야에서 활발히 진행되고 있으며, 빅데이터를 이용한 프로세스 분석 및 개선 기법인 프로세스 마이닝 역시 민간에서 널리 활용되고 있다. 하지만 군 내 계약업무에 대한 분석은 업무 담당자의 경험과 단편적인 정보를 활용한 이·불용 문제사례별 원인 파악 및 대응적 모색과 같은 개별적 분석수준에 그치고 있다. 본 연구는 계약 프로세스 개선을 위해 공군 군수사령부 재정처가 2019년 11월부터 약 1년간 직접 계약한 총 560건의 계약업무에 관한 데이터를 가지고 프로세스 마이닝 기법을 이용하여 분석하였다. 분산된 데이터를 종합하여 프로세스 맵을 도출하고, 프로세스의 흐름, 수행시간 분석, 병목 분석 및 추가 세부분석을 실시했다. 분석결과 다수 계약 건에서 의뢰 후 재검토/수정이 반복 발생하고 있음을 발견할 수 있었다. 반복적인 재검토/수정은 원가계산 완료까지의 소요일수 지연에 크게 영향을 미치고 있으며, 이는 병목 지점 시각화를 통해서도 명확하게 드러났다. 재검토/수정은 계약의뢰가 많은 상위 5개 부서에서 60% 이상 발생하고, 의뢰가 집중되는 상반기에 주로 발생하는데 이는 소요부서의 계약의뢰 전 면밀한 사전검토가 필요함을 의미한다. 그리고 재정처의 계약업무는 법령에 따른 절차대로 수행되고 있었으나, 일부 업무의 순서조정이 필요함을 알 수 있었다. 본 연구는 군 내 계약업무 분석에 프로세스 마이닝을 이용한 첫 사례이다. 이를 기반으로 프로세스 마이닝을 군대 내 다양한 업무에 적용하기 위한 연구가 더욱 수행된다면, 각종 업무의 효율화를 이끌어 낼 수 있을 것으로 기대한다.

한 대학병원 응급실 내원환자의 방사선촬영 실태 (Radiographic Status of the Visited Patients at University Hospital Emergency Room)

  • 안병주
    • 한국방사선학회논문지
    • /
    • 제5권2호
    • /
    • pp.81-92
    • /
    • 2011
  • 응급상황에서 방사선 촬영 분포 분석 및 문헌을 토대로 응급상황 대처 및 서비스 효율성을 개선시키기 위하여 연구를 하였다. 2010년 12월, 광주 광역시 한 대학병원에 응급실을 내원한 1270명 응급 외래환자를 분석하여 방사선 촬영 분포 데이터를 분석하였다. 결과는 다음과 같다. 응급 방사선 촬영은 56.6% 일반 방사선 촬영, 2.5% 특수촬영, CT 34.2%, 초음파 6.7%였으며, 일반 방사선 촬영에서 남성은 51.7%, 흉부외과의 촬영률 90.0%, 입원환자 77.9% 및 응급실에서 머무르는 시간이 긴 환자에게서 촬영하였다. 특수 촬영의 비율은, 비뇨기계 28.6%, CT에서는 신경외과 49.2%, 신경과 36.7%의 높은 비율을 나타냈다. 초음파의 경우 여성이 8.8%, 내과가 15.9% 비율을 나타냈다. 방사선 촬영의 분포도를 분석하면, 일반 방사선 촬영에서 흉부촬영 55.3%, 특수 촬영에서는 1.2%의 비뇨기계, CT에서는 두부 검사가 40.0%로 높은 비율을 차지했다. 일반 촬영의 진료과의 분포도에 따르면, 두부가 64.6% 신경외과, 흉부검사는 흉부외과는 90.9%, 복부가 58.0% 일반외과, 척추는 신경외과 40.0%, 골반 및 상하지는 정형외과가 15.9%, 20.5%, 31.8%를 차지하였다. 일반 촬영의 환자 1인당 평균검수는 전체 인원을 고려하여 성별, 연령별, 전원 여부별 모두에서 유의한 차이를 나타냈다(p<0.05). 촬영만을 고려한 경우에는 성별에서 남자가 2.2건 높았으며, 연령대에서는 30대에서 2.7건이, 진단부분에서는 신경외과가 3.4건이 더 높게 차지하였다. 전체 촬영 부위 건수에서는 흉부가 998건으로 가장 많았다. 결과를 고려해보면, 응급실에서 근무하는 방사선사는 응급 촬영에서 노년층을 돌봐야 하며, 촬영동안에 가능한 2차 손상을 특수 촬영인 비뇨기계 계통이 기구와 관련이 되어 있기 때문이다. 줄이기 위한 부상응급 환자를 검사하는 모든 방사선사는 방사선 촬영하는 동안에 긴급 상황에 대처해야 한다. 방지 대처가 필요하다. 왜냐하면, 특히 야간에 CT 촬영하는 두부 손상 환자는 환자 처치가 매우 중요하다. 담당 의사는 언제나 CT실에 상주하여 환자를 지켜봐야 한다. 응급실에서 방사선 촬영은 여러 진료과에서 관여 한다. 일반 방사선 촬영의 높은 비율, 응급 방사선 촬영에 대한 특수 촬영실이 응급실 내에 설치하여만 하고, 능력이 있는 응급 환자 처치를 할 수 있는 방사선사가 필요로 하고 응급환자 증가로 적절한 인원배치가 필요하다.