• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.28.1-28.1
• /
• 2011

Radiation-induced displacement damage which has caused the increase of the dark current in the focal plane adopted in the Ozone Monitoring Instrument (OMI) was studied in regards of the primary protons and the secondaries generated by the protons in the orbit. By using the Monte Carlo N-Particle Transport Code System (MCNPX) version 2.4.0 along with the Stopping and Range of Ions in Matter version 2010 (SRIM2010), effects of the primary protons as well as secondary particles including neutron, electron, and photon were investigated. After their doses and fluxes that reached onto the charge-coupled device (CCD) were examined, displacement damage induced by major sources was presented.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.61-68
• /
• 2004

The evaporation phenomena of waterr droplet which has sodium acetate trihydrate($CH_3COONa{\cdot}3H_2O$) as a fire suppression additive were studied. Solutions of sodium salt up to 50% and heated stainless-steel surface were used in the experiment. The evaporation process was recorded using a charge-coupled-device camera at 120 frames per second. The average evaporation rate of the sodium acetate trihydrate soluation was lower than that of pure water at a given surface temperature and decreased with the concentration increase due to the precipitation of salt in the liquid film and change of surface tension. The variation of liquied film diameter was measured by time and it was increased by the hot surface temperature increase.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.1
• /
• pp.47-55
• /
• 2000

A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.

• Applied Science and Convergence Technology
• /
• v.24 no.1
• /
• pp.16-21
• /
• 2015

The characteristics of an atmospheric pressure plasma jet (APPJ) in He discharge are measured with electrical and optical diagnostics methods. The discharge phenomenon in one cycle of the APPJ was diagnosed using intensified charge coupled device (ICCD) imaging. The gate mode images show that the propagation of plasma bullets happens only when the applied voltage on the inner conductor is positive. Moreover, the Schlieren image of the plasma jet shows that the laminar flow is changed into a turbulent flow when the plasma jet is turned on, especially when the gas flow rate increases.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.373-375
• /
• 2011

최근 들어, Time-of-Flight (TOF) 방식의 깊이 센서가 컴퓨터 비전이나 영상처리분야 등의 연구에서 다양하게 활용되고 있다. TOF 방식의 깊이 센서는 실시간으로 정확한 깊이 정보를 획득할 수 있는 장점이 있는 반면, 해상도가 낮고 센서의 광학적 특성으로 인해 노이즈가 발생한다는 단점이 있다. 본 논문에서는 이러한 깊이 센서의 단점을 극복하고 고품질의 다시점 영상 합성을 위해 기존 깊이 센서에 여러 대의 Charge-coupled Device (CCD) 카메라를 결합하여 시점 간 일관성 있는 고해상도의 깊이 영상을 획득하는 기술을 제안한다. 한정되어 있는 시점의 영상을 이용하여 다시점 영상을 합성할 때, 각 시점에 해당하는 깊이 영상의 정확도에 따라 합성되는 영상의 품질이 결정된다. 따라서 보유 시점에 해당하는 깊이 영상 간의 일관성이 유지되고 객체의 경계가 정확히 보존되어야만 생성되는 임의 시점 영상의 품질이 보장될 수 있다. 이에, 본 논문에서는 Joint Bilateral Upsampling (JBU)을 기반으로 시점 간 일관성을 고려한 깊이 영상의 해상도 개선 기술을 제안하고 이를 통해 다시점 영상 합성 결과의 품질을 향상시킨다.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.101-101
• /
• 2003

다목적 실용위성 1호에 탑재된 EOC(Electro-Optical Camera)는 2,000년부터 현재까지 한반도 인근 및 세계의 주요 육지 지역을 관측하고 있다. DOC는 크게 광학부(Sensor Assembly)와 전자부(Electronics Assembly)로 구성되어 있으며, 지상으로부터 입사하는 광 정보를 디지털 신호로 재구성하여 PDTS(Payload Data Transmission System)을 통해 지상으로 전송한다. EOC 광학부는 2,592개의 CCD(Charge-Coupled Device) 센서들로 구성된 선형 시스템이며, push-broom 주사 방식으로 구동된다. 한편, EOC의 임무 전, 후로 Aperture Cover Mechanism에 의해 EOC의 덮개를 덮은 상태로 짧은 시간동안 촬영을 수행, 획득된 영상 역시 지상으로 전송한다. 이러한 영상들은 EOC 영상에 포함되어 있는 암전류(Dark Current)에 대한 간접적인 정보를 제공하며, Dark Calibration Data로 정의된다. Dark Calibration Data는 지상에서 수신된 후, EOC 영상에 대한 복사 보정에 이용된다. 본 연구에서는 EOC Dark Calibration Data에 대한 분석을 통해, EOC 영상 내의 잡음 성분을 분석한다.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.1
• /
• pp.31-35
• /
• 2017

Optical observation is one of the most common techniques used for characterizing the physical properties of unknown objects and debris in space. This research presents measurements and properties of the new object 96019 from ground-based optical methods. Optical observations of this small object were performed using a charge-coupled device (CCD) camera and the Santel-500 telescope at the Zvenigorod Observatory. The orbital elements and physical properties of this object, such as area-to-mass ratio, have been determined. The results show that this small object has a low area-to-mass ratio, between 0.009 and $0.12m^2/kg$. The light curve of object 96019 is given: Over the time intervals, variations in brightness are analyzed and the maximum brightness was found to be 12.4 magnitudes. The observational results show that, this object brightens by about three magnitudes over a time span of three minutes. Based on these observations, the characteristics and physical properties of this object are discussed.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.486-488
• /
• 2004

The SRI (Super Resolution Imager) uses the CCD (Charge coupled device) detector that is used to convert the light into electronic data. The purpose of the SRI is to obtain data for high resolution images by converting incoming light into digital stream of pixel data. The SRI has a high resolution, so this electronic system needs more fast imaging data processing, detector control and data transmission systems. This report describes the required system specification and manufactured electronic system for satellite.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.307-310
• /
• 2000

The measuring method of large object using the pattern matching is discussed in the paper. It is hard and expensive to get the complete 3D data when the object is large or exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method. The point pattern matching method and transform matrix algorithm are used for aligning. The laser slit beam and CCD camera is applied for experimental measurement. Visual C++ on Window98 is implemented in processing the algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.480-484
• /
• 2006

We propose a new PDP cell structure named DIDE (Dual Ignition Discharge Electrodes) structure with a long electrode gap to realize a high luminous efficacy. Suggested DIDE structure basically has a long electrode gap $(200{\mu}m{\sim}400{\mu}m)$, nevertheless, because of auxiliary electrodes formed on the front panel, can be driven at relatively low voltage. The discharge characteristic of DIDE structure was much different from that of conventional structure, which was analyzed by IR emission images using IICCD (Image Intensified Charge Coupled Device). The study can explain some particular characteristics of DIDE structure. As a result, the long electrode gap and low voltage effect can be expected in DIDE structure, and a very high luminous efficacy of 7.5 lm/W has been achieved in monochrome green test panel adopting the new cell structure with Ne-Xe (12%) mixture at 400 torr.