• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.307-316
• /
• 2022

The misuse of pesticides has resulted in environmental pollution, which directly or indirectly affects all life on earth. Chlorpyrifos is a chlorinated organophosphorus pesticide that is commonly used in agriculture. The aim of this study was to investigate the effects of chlorpyrifos on the fertilization function of boar spermatozoa. Sperm samples from boars were subjected to varying concentrations of chlorpyrifos from 10 to 200 µM for two incubation periods, 30 min or 2 hrs. The boar spermatozoa were then evaluated for motility, motion kinematics, viability, acrosome integrity, chromatin stability, and generation of intracellular reactive oxygen species (ROS). There was a significant percentage reduction in sperm motility and motion kinematic parameters after both incubation periods (p < 0.05). The proportion of viable spermatozoa decreased after incubation for 30 min and 2 hrs in a dose-dependent manner (p < 0.05). A significantly lower percentage of normal acrosomes was observed in spermatozoa exposed to 200 µM chlorpyrifos over both incubation periods, compared to the controls. The damage to sperm DNA was significantly higher when the exposure time to chlorpyrifos was longer. There was a significant increase in the ROS levels in spermatozoa incubated with chlorpyrifos for 2 hrs (p < 0.05). From the results of the present study, it is concluded that direct exposure of boar spermatozoa to chlorpyrifos altered boar sperm characteristics, suggesting potential toxicity that may affect the male reproductive function.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2889-2896
• /
• 2023

The waste acceptance criteria for heavy metals in mixed waste should be developed by reflecting the leaching behaviors that could highly depend on the repository design and environment surrounding the waste. The current standards widely used to evaluate the leaching characteristics of heavy metals would not be appropriate for the silo-type repository since they are developed for landfills, which are more common than a silo-type repository. This research aimed to explore the leaching behaviors of cementitious waste with Pb, Cd, and Sb metallic and oxide powders in an environment simulating a silo-type radioactive waste repository. The Toxicity Characteristic Leaching Procedure (TCLP) and the ANS 16.1 standard were employed with standard and two modified solutions: concrete-saturated deionized and underground water. The compositions and elemental distribution of leachates and specimens were analyzed using an inductively coupled plasma optical emission spectrometer (ICP-OES) and energy-dispersive X-ray spectroscopy combined with scanning electron microscopy (SEM-EDS). Lead and antimony demonstrated high leaching levels in the modified leaching solutions, while cadmium exhibited minimal leaching behavior and remained mainly within the cement matrix. The results emphasize the significance of understanding heavy metals' leaching behavior in the repository's geochemical environment, which could accelerate or mitigate the reaction.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.371-379
• /
• 2023

Ammonia, which is closely related to our lives, has a significant impact on our lives as a representative substance for crop cultivation. Recently, it has gained attention as an efficient and productive hydrogen/storing substance that can replace fossil fuels. Efforts are being made to utilize it as a renewable energy source through thermochemical and electrochemical reactions. However, the use of ammonia, which encompasses the era, carries inherent toxicity, so a comprehensive understanding of ammonia safety is necessary. To ensure safety in the transportation and storage of ammonia and chemical substances domestically and internationally, national and organizational standards are being developed and provided through documents and simple symbols to help people understand. This review explores the chemical characteristics of ammonia, its impact on human health, and the global trends in safety standards related to ammonia. Through this examination, the paper aims to contribute to the discourse on the safety and risk management of ammonia transport and storage, crucial for achieving carbon neutrality and expanding the hydrogen economy.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.955-960
• /
• 2008

We investigated and estimated at the characteristics of decomposition and mineralization of benomyl using a design of experiment(DOE) based on the general factorial design in an E-beam process, and also the main factors(variables) with benomyl concentration(X$_1$) and E-beam irradiation(X$_2$) which consisted of 5 levels in each factor was set up to estimate the prediction model and the optimization conditions. At frist, the benomyl in all treatment combinations except 17 and 18 trials was almost degraded and the difference in the decomposition of benomyl in the 3 blocks was not significant(p > 0.05, one-way ANOVA). However, the % of benomyl mineralization was 46%(block 1), 36.7%(block 2) and 22%(block 3) and showed the significant difference of the % that between each block(p < 0.05). The linear regression equations of benomyl mineralization in each block were also estimated as followed; block 1(Y$_1$ = 0.024X$_1$ + 34.1(R$^2$ = 0.929)), block 2(Y$_2$ = 0.026X$_2$ + 23.1(R$^2$ = 0.976)) and block 3(Y$_3$ = 0.034X$_3$ + 6.2(R$^2$ = 0.98)). The normality of benomyl mineralization obtained from Anderson-Darling test in all treatment conditions was satisfied(p > 0.05). The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were Y = 39.96 - 9.36X$_1$ + 0.03X$_2$ - 10.67X$_1{^2}$ - 0.001X$_2{^2}$ + 0.011X$_1$X$_2$(R$^2$ = 96.3%, Adjusted R$^2$ = 94.8%) and 57.3% at 0.55 mg/L and 950 Gy, respectively. A Microtox test using V. fischeri showed that the toxicity, expressed as the inhibition(%), was reduced almost completely after an E-beam irradiation, whereas the inhibition(%) for 0.5 mg/L, 1 mg/L and 1.5 mg/L was 10.25%, 20.14% and 26.2% in the initial reactions in the absence of an E-beam illumination.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.107-111
• /
• 2012

Eight marine sediments from Busan port in Korea were annually analyzed to examine the concentration distribution of dioxins from 2006 to 2010. Yearly mean concentration of dioxins ranged from 186.3 to $383.3pg\;g^{-1}$ in real values and 5.087 to 8.541 pg-TEQ (Toxicity equivalency) based on dry weight of samples. The dioxin concentration at the site near fishing market was the highest concentration among all sampling sites. Also the dioxin concentration at the sites with various pollutant sources such as large ships, sewage influx and thermal power station as well as fishing market was higher than that of the sites without specific pollutant sources. Another main factor that affects the dioxin concentration is topography characteristics of the bay. The bay has relatively high dioxin concentration because of the lack of the pollutant diffusion. This study demonstrated that the dioxin concentration in the site with pollutant sources and the lack of the pollutant diffusion was relatively high as compared with the other sites. As a result of contribution ratio of dioxin congeners, OCDD (Octachlorodibenzodioxin) in all sites was major contributor in real value, in contrast, dioxin congeners in TEQ values were dominated by 2,3,4,7,8-PeCDF.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.4 s.10
• /
• pp.33-41
• /
• 2006

The purpose of this study was to investigate consumer's behaviors on the purchase and the laundering of baby's clothing according to washing machine types using by consumers. The subjects were 255 consumers with babies(0-2 years) in Korea. The data were collected using a self-administered questionnaire and analyzed using Chi-square test and multiple response analysis, and SPSS 12.0 statistics package was used. Consumers were separated into two groups according to washing machine types with general pulsator type and drum-type. Consumer's behaviors between general pulsator type group and drum-type group of washing machines were also examined. The Results of this study were as follows: 1. The purchase rate of baby's clothing was high compare to that of general clothing of family. The consumers with babies had priority on textile materials(cotton 100%) as baby's clothing. As for the consumer's behaviors between the purchase of baby's clothing and the consumer's characteristics, they showed a significant differences according to the consumer's characteristics like education level and washing machine types using by consumers. 2. The removal of soils including various foods was very important on the laundering of baby's clothing. Especially the rinsing of detergents was important on the laundering. Because they considered toxicity of detergents was high and harmful to the baby, and detergent's components such as surfactants, builders, and another additives could not removed completely with normal laundry courses by washing machines. 3. There were significant differences between general pulsator type group and drum-type group of washing machines on the purchase and the laundering of baby's clothing.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.10 no.2
• /
• pp.91-96
• /
• 2012

Purpose: A retrospective study with a literature review was conducted to identify the clinical characteristics and prognosis after the acute ingestion of glacial acetic acid. Methods: The medical records of 20 patients,who had presented to the emergency department of Ajou University Hospital complaining of the acute ingestion of glacial acetic acid between January 2006 and December 2011, were examined retrospectively. Results: Among the 172 patients admitted for caustics injury, 20 patients ingested glacial acetic acid. The mean age of the patients was $55{\pm}23.5$, and the mean volume of the acid was $84.5{\pm}71.3$ ml. The clinical features included 1) oral ulcers in 12 patients (63.2%), 2) respiratory difficulties in 11 patients (57.9%), 3) oliguria in 8 patients (42.1%), 4) renal toxicity in 7 patients (36.8%), 5) hepatic failure in 7 patients (36.8%), 6) disseminated intravascular boagulopathyin 7 patients (36.8%), 7) low blood pressure in 8 patients (42.1%), and 8) mental changes in 9 patients (47.4%). Ten patients required endotracheal intubation. Nine patients were admitted to the intensive care unit, and 5 patients expired. Conclusion: The ingestion of glacial acetic acid can cause severe symptoms, such as metabolic acidosis, multiple organ failure and upper airway swelling frequently and has a high mortality rate. Therefore, aggressive treatment, including endotracheal intubation, should be considered at the early stages.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.44-53
• /
• 1994

A study on the iron electrode which is a good material for alkaline battery because of its superior characteristics including high theoretical capacity density, low toxicity, low cost and inexhaustible supply was performed to develop high performance nickel-iron secondary battery. The characteristics of chrage-discharge reaction were examined by cyclic voltammetry technique SEM and XRD analysis. The capacity of the test electrodes was determined by the costant current charge-discharge method. It was found that the purity and particle size of iron material were the major determinant factors of electrode capacity. With the addition of $Na_2S$ into the electrolyte the capacity of electrode was increased about 20 % caused by the prevention of passivation and the increase of hydrogen overpotential. The stability and capacity of electrode were increased with the use of Ni-fibrex and foamed Ni collectors and also depended on the sintering temperature. The capacity of electrode was 350 mAh/g(0.2 C) which corresponded to 36% utility.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.505-509
• /
• 2002

Pb is considered to be eliminated from solder, due to its toxicity. However, melting temperatures of most Pb-free solders are known higher than that of Sn37Pb. Therefore, there is a difficulty to apply Pb-free solders to electronic industry. Since Sn3Ag8Bi5In has relatively lower melting range as $188~200^{\circ}C$, on this study. Wettability and soldering characteristics of Sn3Ag8Bi5In solder in BGA were investigated to solve for what kind of problem. Zero cross time, wetting time, and equilibrium force of Sn3Ag8Bi5In solder for Cu and plated Cu such as Sn, Ni, and Au/Ni-plated on Cu were estimated. Plated Sn on Cu showed best wettability for zero cross time, wetting time and equilibrium farce. Shear strength of the reflowed joint with Sn3Ag8Bi5In ball in BGA was investigated. Diameter of the ball was 0.5mm, UBM(under bump metallurgy) was $Au(0.5\mu\textrm{m})Ni(5\mu\textrm{m})/Cu(18\mu\textrm{m})$ and flux was RMA type. For the reflow soldering, the peak reflow temperature was changed in the range of $220~250^{\circ}C$, and conveyor speed was 0.6m/min.. The shear strength of Sn3Ag8Bi5In ball showed similar level as those of Sn37Pb. The soldered balls are aged at $110^{\circ}C$ for 36days and their shear strengths were evaluated. The shear strength of Sn3Ag8Bi5In ball was increased from 480gf to 580gf by aging for 5 days.