• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Journal of Korea Water Resources Association
• /
• v.44 no.10
• /
• pp.831-841
• /
• 2011

In this study, with the assumption that the geographical characteristics of the river basin have selfsimilarity, fractal dimensions are used to quantify the complexity of the terrain. For this, Area exponent and hurst exponent was applied to estimate the fractal dimension by using spatial analysis. The result shows that the value of area exponent and hurst exponent calculated by the fractal dimension are 2.008~2.074 and 2.132~2.268 respectively. Also the $R^2$ of area exponent and hurst exponent are 94.9% and 87.1% respectively too. It shows that the $R^2$ is relatively high. After analyzing the spatial self-similarity parameter, it is shown that traditional urban area's moderate slope geographical characteristic closed to 2D fractal in Ara water way. In addition, the relation between fractal dimension and geographical elements are identified. With these results, fractal dimension is the representative value of basin characteristics.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.71-76
• /
• 2017

The electrical behavior and flexibility of the screen printed Ag circuits were investigated with infrared radiation sintering times and sintering temperatures. Electrical resistivity and radio frequency characteristics were evaluated by using the 4 point probe measurement and the network analyzer by using cascade's probe system, respectively. Electrical resistivity and radio frequency characteristics means that the direct current resistance and signal transmission properties of the printed Ag circuit. Flexibility of the screen printed Ag circuit was evaluated by measuring of electrical behavior during IPC sliding test. Failure mode of the Ag printed circuits was observed by using field emission scanning electron microscope and optical microscope. Electrical resistivity of the Ag circuits screen printed on Pl substrate was rapidly decreased with increasing sintering temperature and durations. The lowest electrical resistivity of Ag printed circuit was up to $3.8{\mu}{\Omega}{\cdot}cm$ at $250^{\circ}C$ for 45 min. The crack length arisen within the printed Ag circuit after $10{\times}10^4$ sliding numbers was 10 times longer than that of after $2.5{\times}10^4$ sliding numbers. Measured insertion loss and calculated insertion loss were in good agreements each other. Insertion loss of the printed Ag circuit was increased with increasing the number of sliding cycle.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.864-880
• /
• 2003

A unified picture for magnetism, superconductivity, quantum optics and other properties of molecule-based materials has been presented on the basis of effective model Hamiltonians, where necessary parameter values have been determined by the first principle calculations of cluster models and/or band models. These properties of the matetials are qualitatively discussed on the basis of the spin and pseudo-spin Hamiltonian models, where several quantum operators are expressed by spin variables under the two level approximation. As an example, ab initio broken-symmetry DFT calculations are performed for cyclic magnetic ring constructed of 34 hydrogen atoms in order to obtain effective exchange integrals in the spin Hamiltonian model. The natural orbital analysis of the DFT solution was performed to obtain symmetry-adapted molecular orbitals and their occupation numbers. Several chemical indices such as information entropy and unpaired electron density were calculated on the basis of the occupation numbers to elucidate the spin and pair correlations, and bonding characteristic (kinetic correlation) of this mesoscopic magnetic ring. Both classical and quantum effects for spin alignments and singlet spin-pair formations are discussed on the basis of the true spin Hamiltonian model in detail. Quantum effects are also discussed in the case of superconductivity, atom optics and quantum optics based on the pseudo spin Hamiltonian models. The coherent and squeezed states of spins, atoms and quantum field are discussed to obtain a unified picture for correlation, coherence and decoherence in future materials. Implications of theoretical results are examined in relation to recent experiments on molecule-based materials and molecular design of future molecular soft materials in the intersection area between molecular and biomolecular materials.

• Sleep Medicine and Psychophysiology
• /
• v.15 no.2
• /
• pp.71-76
• /
• 2008

Introduction: In this study, we compared sleep structure, EEG characteristic of pediatric obstructive sleep apnea (OSA) and normal controls which were matched in sex and age. Methods: Fifteen children (male：female=4：11) who complained snoring and were suspected to have sleep apnea and their age and sex matched normal controls (male：female=5：10) have been done nocturnal polysomnography (NPSG). Sleep parameters, sleep apnea variables and relative spectral components of EEG from NPSG have been compared between both groups. Results: Pediatric OSA group were distinguished from normal controls in terms of apnea index, respiratory disturbance index and nadir of oxyhemoglobulin desaturation. Pediatric OSA group showed increased percent of sleep stage 1, decreased rapid eye movement sleep percent and increased delta power in O1 EEG channel. However other sleep parameters and spectral powers were not different between two groups. Conclusion: In pediatric OSA group, sleep structure parameter disruption may be not prominent as the previous studies for adult OSA group because of including mild OSA data in diagnostic criteria. In addition, EEG changes might not be distinct due to low arousal index compared to adult OSA patients. We can observe general characteristics and particularity of pediatric OSA through this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.482-487
• /
• 2005

In this paper, we propose the control method of output impedance of each cascode unit cell of distributed amplifier by connecting varactors in the gate-terminal of common gate. Compared to common source unit cell, cascode unit cell has many advantages such as high gain and high output impedance as well as negative resistance loading. But if the transistor model which is used in design is inaccurate and process parameter is changed, oscillation sometimes can occur at band edge in which the gain start to drop. Therefore, we need control circuit which can prevent oscillation, although the circuit has already fabricated, and varactor connected to gate-terminal of common gate of cascode gain cell can play that part. Measured result of fabricated distributed amplifier shows the capability of contol of gain characteristic by adjusting of value of varactors, this can guarantee the stability of the circuit. The gain is $8.92\pm0.82dB$ over 49 GHz, the group delay is $\pm9.3 psec$ over 41 GHz. All transistor which has $0.15{\mu}m$ gate length is GaAs based p-HEMT, and distributed amplifier is put together with 4 stages.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.926-934
• /
• 2006

In this study, nitrate uptake rate(NUR) and oxygen uptake rate(OUR) tests were conducted for the assessment of application of Terephtalic acid(TPA) by-product as an alternative external carbon source for sewage treatment plant(STP). With the ASM1 installed in GPS-X the substrate removal characteristic was investigated with simulation by obtained data from NUR and OUR test. As a result, the fraction of RBDCOD(readily biodegradable COD) was mort than 90% and specific denitrification rate was observed about 8.00 mg $NO_3^-$-N/g VSS/hr that was similar to conventional external carbon source. In the next step, sensitivity analysis for heterotrophic biomass in ASM1 was conducted. Optimized parameters of ${\mu}_{max,H}$, $K_s$, ${\eta}_g$, and $b_H$ were 6.60/day, 23.3 mg/L, 0.88, and 0.54/day, respectively. Then, relative mean squared error(RMSE) was reduced to about 40%. Optimized parameters value were well corresponded with the substrate removal characteristics of high maximum and final endogenous specific OUR and high specific NUR.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.41-47
• /
• 2020

Purpose: The purpose of this study was to evaluate the flexural strength and reliability of highly translucent colored zirconia for all ceramic restoration. Materials and Methods: Bar-shaped specimens (25 × 4 × 2.5 mm) were prepared from highly translucent monolithic zirconia. Three experimental groups were set up according to color (shade A0, A1, and A3). For each group, 20 specimens were prepared. Flexural strength was determined using a 3-point flexural test and results were analyzed with one-way ANOVA test. Weibull statistical analysis provided 2 parameter estimates: Weibull modulus and characteristic strength. X-ray diffraction (XRD) analysis was performed. Results: There was statistically significant difference between uncolored (Shade A0) and colored (shade A1 and A3) (P < 0.05), but there was no difference between colored groups (P > 0.05). The uncolored group had higher reliability compared with colored study groups. On x-ray diffraction analysis of each group, typical peaks of tetragonal phase appeared in all groups. Conclusion: Within the limitations of this in vitro study, coloring highly translucent zirconia had significant effect on flexural strength and reliability. Therefore, clinicians should be careful when using highly translucent colored zirconia to prevent breakage of veneering ceramic and enhance aesthetics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1083-1094
• /
• 2016

Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity ($0.41{\pm}0.031$), while moderate heritability estimates were obtained for backfat thickness ($0.20{\pm}0.018$), longissimus muscle (LM) area ($0.23{\pm}0.020$), carcass weight ($0.28{\pm}0.019$), yield index ($0.20{\pm}0.018$), yield grade ($0.16{\pm}0.017$), marbling ($0.28{\pm}0.021$), texture ($0.14{\pm}0.016$), quality grade ($0.26{\pm}0.016$) and price/kg ($0.24{\pm}0.025$). Relatively low heritability estimates were observed for meat color ($0.06{\pm}0.013$) and fat color ($0.06{\pm}0.012$). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from -0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, -0.43, and -0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were -0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, -0.41, -0.79, and -0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and -0.73, respectively, with standard errors ranging from ${\pm}0.047$ to ${\pm}0.058$. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.149-159
• /
• 1998

The reasonable prediction of time-dependent deformation of prestressed concrete(PSC) box girder bridges is very important for accurate construction as well as good serviceability. The long-term behavior is mostly influenced by the probabilistic characteristic of creep and shrinkage. This paper presents a method of statistical analysis and sensitivity analysis of creep and shrinkage effects in PSC box been taken into account - model uncertainty, parameter variation and environmental condition. The statistical and sensitivity analyses are performed by using the numerical simulation of Latin Hypercube sampling. For each sample, the time-dependent structural analysis is performed to produce response data, which are then statistically analyzed. The probabilistic prediction of the confidence limits on long-term effects of creep and shrinkage is then expressed. Three measure are examined to quantify the sensitivity of the outputs of each of the input variables. These are rank correlation coefficient(RCC), partical rank correlation coefficient(PRCC) and standardiozed rank regression coefficient(SRRC) computed on the ranks of the observations. Three creep and shrinkage models - i. e., ACI model. CEB-FIP model and the model in Korea Highway Bridge Specification - are studied. The creep model uncertainy factor and the relative humidity appear to be the most dominant factors with regard to the model output uncertainty.