• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.36-44
• /
• 2010

The ambipolar diffusion equation has been solved in a fine-tube lamp of a few mm in diameter. In the diffusion of radial direction, the plasma diffuses and vanishes away at the glass wall by recombination with the characteristic time of plasma loss is given by $\tau_r\;=\;(r_0/2.4)^2/D_a$. With the radius $r_0{\sim}1\;mm$ and the ambipolar diffusion coefficient $D_a{\sim}0.01\;m^2/s$, the vanishing time is calculated $\tau_r{\sim}10\;{\mu}s$ which corresponds to the least value of frequency 30 kHz for the sustaining the plasma in the operation of high voltage AC-power. In the diffusion of longitudinal z-direction, a high density plasma generated at the area of a high voltage electrode, diffuses into the positive column with the characteristic time $\tau_z{\sim}0.1\;s$. The plasma diffusion velocity at the boundary of high density plasma is $u_D{\sim}10^2\;m/s$ at the time $t{\sim}10^{-6}$ s and the diffusion velocity becomes slow as $u_D{\sim}1\;m/s$ at $t{\sim}10^{-3}\;s$. Therefore, for the long lamp of 1 m, it takes about several seconds for the high density plasma at the area of electrode to diffuse through the whole positive column space.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.159-175
• /
• 2021

This study attempted to analyze the relationship between influencer's characteristic factors such as professionalism, authenticity, and interactivity and content quality factors consisting of accuracy, completeness, and diversity on brand attitude and purchase attitude through trust and self-consistency. To reveal the structural relationship between main variables, a survey was conducted on 201 users. An EFA, CFA, and reliability analysis were performed to confirm reliability and validity. And structural equation was conducted to verify hypothesis. The main results are as follows. First, it was found that professionalism and interactivity had a significant positive effect on trust. And, accuracy, completeness, and variety were all found to have a significant positive effect on trust. Second, in the relationship between individual characteristic factors and self-consistency, it was found that professionalism and authenticity had a significant positive effect on self-consistency. In addition, in the relationship between content quality and self-consistency, accuracy, completeness, and diversity were found to have a positive effect on self-consistency along with trust. Third, in the relationship between trust and self-consistency on brand attitude and purchase intention, both trust and self-consistency were found to have a statistically significant positive effect on brand attitude. It was found that only self-consistency and brand attitude had a statistically significant positive effect on purchase intention. These findings showed that when users perceive professionalism and interaction with influencer, trust increases, and professionalism and progress increase self-consistency with influencer. In addition, in the case of content quality, it was found that trust and self-consistency responded positively when perceived content quality through content accuracy, completeness, and diversity. Also, trust and self-consistency increased attitudes toward brands and could influence consumption behavior such as purchase intention. Therefore, for effective marketing performance using influencer's influence in the field of influencer marketing, which has a strong information delivery on products and brands, not only personal characteristics such as professionalism, authenticity, and interactivity, but also quality of content should be considered. The above research results are expected to suggest implications for marketing strategies and practices as one available basic data to exert the expected effect of marketing using influencer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.731-741
• /
• 2008

Previous studies on the numerical simulation at the tidal reach of Han River tend to restrict downstream boundary as Jeon-ryu station due to difficulties in gaining cross section data and tidal elevation values at Yu-do. But, in this study, geometries beyond the confluence of Gok-reung stream and Im-jin River are constructed based on the numerical sea map; tidal elevation at the downstream boundary, Yu-do is estimated by harmonic analysis of In-cheon tide gage station so that hydrodynamic and diffusion behavior have been analyzed. The domain ranging from Shin-gok submerged weir to Yu-do is selected (which is 36.8 km in length). RMA-2 and RAM4 developed by Il Won Seo (2008) are applied to simulate flow and diffusion behavior, respectively. Numerical results of flow characteristic are compared with the measured data at Jeon-ryu station. Simulation is carried out from June 23 to 25 in 2006 on the ground that hydrologic data is satisfactory and tidal difference is huge during that period. The result shows that reverse flow occurs 5 times according to the tidal elevation at Yu-do and the maximum reverse flow is observed up to Jang-hang IC, which is 32.9 km in length. Also analysis is focused on the process of generation and disappearance of reverse flow, the distribution of water surface elevation and velocity along the maximum velocity line, and the transport of nonconservative pollutant. Pollutant injected from Gul-po stream spreads widely across the river; however, the size of BOD cloud entering from Gok-reung stream is relatively small because water depth at the mid and left side becomes deeper and maximum velocity occurs along the right bank so that transverse mixing is completed quickly. Finally, mixing characteristic of horizontal salinity distribution is obtained by estimating the salinity input with analytical solution of 1D advection-dispersion equation.

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.139-153
• /
• 2018

The sea surface wind field has long been obtained from satellite scatterometers or passive microwave radiometers. However, the importance of satellite altimeter-derived wind speed has seldom been addressed because of the outstanding capability of the scatterometers. Satellite altimeter requires the accurate wind speed data, measured simultaneously with sea surface height observations, to enhance the accuracy of sea surface height through the correction of sea state bias. This study validates the wind speeds from the satellite altimeters (GFO, Jason-1, Envisat, Jason-2, Cryosat-2, SARAL) and analyzes characteristics of errors. In total, 1504 matchup points were produced using the wind speed data of Ieodo Ocean Research Station (IORS) and of Korea Meteorological Administration (KMA) buoys at Marado and Oeyeondo stations for 10 years from December 2007 to May 2016. The altimeter wind speed showed a root mean square error (RMSE) of about $1.59m\;s^{-1}$ and a negative bias of $-0.35m\;s^{-1}$ with respect to the in-situ wind speed. Altimeter wind speeds showed characteristic biases that they were higher (lower) than in-situ wind speeds at low (high) wind speed ranges. Some tendency was found that the difference between the maximum and minimum value gradually increased with distance from the buoy stations. For the improvement of the accuracy of altimeter wind speed, an equation for correction was derived based on the characteristics of errors. In addition, the significance of altimeter wind speed on the estimation of sea surface height was addressed by presenting the effect of the corrected wind speeds on the sea state bias values of Jason-1.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.125-137
• /
• 2018

Credit unions organized and operated by the members of communities, work-places or groups are co-operative entities where customers act as owners not just transaction partners. The foregoing organizational characteristic of credit unions exerts beneficial effects on their customer relationship, and underscores the need for diversifying their relationship marketing strategies. This study sheds light on the structural relationship of credit unions in terms of principal variables of relationship marketing, i.e. relationship benefits, customer satisfaction and long-term relationship orientation. Specifically, we classify the relationship benefits into three sub-dimensions, i.e. confidence benefits, social benefits and special treatment benefits, and structuralize a causal model involving the customer satisfaction and long-term relationship orientation. From December 26, 2017 to January 26, 2018, A total of 360 questionnaires was collected. Of these, 346 were selected as the final samples, excluding 14, which are difficult to use in statistics. The reliability analysis, exploratory factor analysis, and regression analysis was performed by using the 'SPSS 24.0'. And confirmatory factor analysis, structural equation model analysis was performed by using 'AMOS 24.0'. The findings highlight the following. First, confidence benefits directly impact on the long-term relationship orientation, and indirectly influence the latter by the medium of customer satisfaction. Second, social benefits directly influence the long-term relationship orientation, without exerting any indirect effects on the latter via customer satisfaction. Third, special treatment benefits do not directly impact on the long-term relationship orientation but have indirect effects on the latter by the medium of customer satisfaction. Fourth, customer satisfaction has positive effects on the long-term relationship orientation. The findings suggest credit unions should establish a long-term relationship with their customers by providing them with confidence benefits to earn their trust and confidence, with social benefits to build a relationship of affinity and friendship, and with special treatment benefits to meet their needs in the long, not short and temporary, term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1082-1090
• /
• 2009

Peak expiratory flow rate(PEF) is a very important diagnostic parameter obtained from the forced vital capacity(FVC) test. The expiratory flow rate increases during the short initial time period and may cause measurement error in PEF particularly due to non-ideal dynamic characteristic of the transducer. The present study evaluated the initial rise slope($S_r$) on the flow rate signal to compensate the transducer output data. The 26 standard signals recommended by the American Thoracic Society(ATS) were generated and flown through the velocity-type respiratory air flow transducer with simultaneously acquiring the transducer output signal. Most PEF and the corresponding output($N_{PEF}$) were well fitted into a quadratic equation with a high enough correlation coefficient of 0.9997. But only two(ATS#2 and 26) signals resulted significant deviation of $N_{PEF}$ with relative errors>10%. The relationship between the relative error in $N_{PEF}$ and $S_r$ was found to be linear, based on which $N_{PEF}$ data were compensated. As a result, the 99% confidence interval of PEF error was turned out to be approximately 2.5%, which was less than a quarter of the upper limit of 10% recommended by ATS. Therefore, the present compensation technique was proved to be very accurate, complying the international standards of ATS, which would be useful to calibrate respiratory air flow transducers.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.113-139
• /
• 2007

This study aims to, looking from a standpoint of network, has investigated the shipping industry's B2B e-marketplace, the characteristics that can earn electronic trust from the users, and characteristics of the web-site. It has examined the mechanism whereby electronic trust be earned and how it affects web-site involvement and service transaction intention. Ultimately, The study attempts to make proposals whereby such trust can lead for a cooperative trading community in the shipping industry's B2B e-marketplace The Covalence structural equation modeling was designed and empirically tested for the shipping industry's B2B e-marketplace. The shipping industry employees were given questionnaires and data were analyzed. Except for perceived security of the three characteristic factors on the web-site, the perceived site quality and characteristics factors in operation only affected co-variables. Transaction Fairness was determined to be the most important factor among exogenous factors increasing electronic trust. With regards to transaction rules, if a transaction is beneficial only to one side, then no long term transaction will not take place. If the concerned parties properly recognize that transaction fairness is crucial to electronic transaction, then it will enormously contribute to successful operations of shipping e-marketplace. Also, Perceived efficiency in transaction also affects electronic trust. This reduces transaction costs and speeds up and simplifies the transaction process. It has reduced greater time and costs than existing off-line transaction, and would positively affect electronic trust. By making an open forum for participants to obtain information for transaction, they can gather useful information, and at the same time, the web-site operator can provide information, which, in turn, will increase electronic trust in electronic transaction. Furthermore, such formation of trust in electronic transaction influences shipping companies in such a way that they will want to continuously participate in the transaction, raising web-site involvement. The result of increased trust is that shipping companies in the future will do business with each other and form a foundation for continuous transactions amongst themselves. Consequently, the formation of trust in electronic transaction greatly influences web-site involvement and service transaction intention. The results of the study have again proved that in order to maintain continuous business relationship with the current clients, electronic trust in virtual space, which operates the shipping industry's B2B e-marketplace, is important for the interested parties.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.249-259
• /
• 2018

This research had intended to find out regarding the present influences of the Smart Work on the intention to use continuously with the staff members working in the small- and medium-sized enterprises as the subject. And, finally, it had intended to find out about the Smart Work environments of the IT corporations and the non-IT corporations. For this research, the questionnaire survey data were collected from the staff members working at the small- and medium-sized enterprises. Through the questionnaire survey data that were collected, an empirical analysis was carried out. And, through the reliability analysis, the feasibility analysis, the discriminatory feasibility analysis, and the inspection of the degree of suitableness of the structural equation model, finally, the research model was verified and, finally, a difference analysis of the IT corporations and the non-IT corporations was carried out. Regarding the results of the analysis of the research, it appeared that the factors of the job efficiency and the job autonomy of the special characteristics of the job had the positive influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the time flexibility of the job form could not have any influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the spatial flexibility had the influences on the job satisfaction only. The perceived usefulness, which was a parameter, had the positive influences on the job satisfaction and the intention to use continuously. And, finally, the job satisfaction had the positive influences on the intention to use continuously. And it appeared that there were the differences, too, between the IT corporations and the non-IT corporations. It is thought that, through the results of this research and through the Smart Work environment, the positive influences on the workers and the organizations could be induced and that a better working environment than previously can be provided to the workers to fit the special characteristics of the corporations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.220-227
• /
• 2004

Phosphorus desorption study is essential to understanding P behavior in agricultural and environmental soils because phosphorus is considered as two different aspects, a plant nutrient versus an environmental contaminant. This study was conducted to determine soil P buffering power related to P desorption quantity intensity (Q/I) parameters, $Q_{max}$(an index of P release capacity) and $l_0$(an index of the intensity factor), and to investigate the characteristics of relationship between the P desorption Q/I parameters and the soil properties. Soil samples were prepared with treatments of 0 and $100mg\;P\;kg^{-1}$ applied as $KH_2PO_4$ solution. The P desorption Q/I curves were obtained by a procedure using anion exchange resin beads and described by an empirical equation ($Q=aI^{-1}+bln(I+1)+c$). The P desorption Q/I curves for the high available P (${\g}20mg\;kg^{-1}$ of Olsen P) soils were characteristic concave trends with or without soil P enrichment, whereas for the low available P (${\lt}20mg\;kg^{-1}$ of Olsen P) soils, the anticipated Q/I concave curves could not be obtained without a proper amount of P addition. When the soils were enriched in phosphates, the values of desorbed solid phase labile P and solution P, such as $Q_{max}$ and $I_0$ respectively, were increased, but the ratio of $Q_{max}$ versus $I_0$ was decreased. Thus, the slope of desorption Q/I curve represented as phosphorus buffering power, $|BP_0|$, is decreased. The $|BP_0|$ values of the high available P soils ranged between 48 and $61L\;kg^{-1}$ in the P untreated samples and between 18 and $44L\;kg^{-1}$ in the P enriched samples. Overall $|BP_0|$ values of both low and high available P soils treated with $l00mg\;P\;kg^{-1}$ ranged between 14 and $79L\;kg^{-1}$. The $Q_{max}$, values ranged between 71.4 and $173.1mg\;P\;kg^{-1}$, and the lo values ranged between 0.98 and $3.82mg\;P\;L^{-1}$ in the P enriched soils. The $Q_{max}$ and $I_0$ values that control the P buffering power may be not specifically related to a specific soil property, but those values were complicatedly related to soil pH, clay content, soil organic matter content, and lime. Also, phosphorus release activity, however, markedly depended on the desorbability of the applied P as well as the native labile P.