• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.195-202
• /
• 2018

The purpose of this study is to analyze the cariogenicity of vitamin supplements for children by the Caries Potentiality Index (CPI), pH drop capacity, proliferation rate of Streptococcus mutans. Four vitamin supplements were selected - Noma (NM), Cenovis Kids (CK), Animal Parade (AP), and Character Vitamin (CV). CPI value decreased in the order of AP, CV, CK, and NM. Initial values of all experimental groups showed acidity below pH 7.0. Analysis of the colony forming units of Streptococcus mutans showed that NM and CV resulted a higher proliferation rate (p < 0.05) than CK and AP (p < 0.05). Bacterial activity of the control group was lower than other groups when observed with a confocal laser scanning microscope. Considering the bacterial activity and acidity of vitamin supplements, it is necessary to pay close attention when children taken the vitamin supplements for their oral health.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.256-262
• /
• 2016

The need for natural cosmetic ingredients has been increasing over the world nowadays. Agarose, a natural polymer from red seaweeds, has high hydrophilic character and a function of scaffolder. As skin moisturizer, agarose is adequate for percutaneous absorption. While, blueberry fruits extract possesses rich procyanidins and anthocyanins which show health benefits, anti-oxidant effect, anti-aging and anti-melanogenesis. Stability, sensory preference, skin trouble of the emulsion formula are important for cosmetic product development. In this study, we manufactured an emulsion formula for skin moisturizers using the two ingredients and tested emulsion stability and skin trouble. Total phenolic contents of the blueberry fruits extract were evaluated as well as tyrosinase inhibitory and collagenase inhibitory activities. $IC_{50}$ values of blueberry fruits extract for anti-tyrosinase and anti-collagenase activities were 168 and $112{\mu}g/mL$, respectively using gallic acid as a control ($64.8{\mu}g/mL$). The stability (pH and viscosity) of the formula containing 2% blueberry fruits extracts and 0.1% agarose was measured at five different temperatures (room temp., $25^{\circ}C$, $55^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$) under the sun light at 2 day intervals for 12 days. There has been little pH change at the different temperatures. According to the sensory evaluation, there was no significant flavor, discoloration and physical changes of the formula at $25-65^{\circ}C$. These results suggest that emulsion formula containing blueberry extract and agarose could be used as a candidate for lotion and essence products.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.826-831
• /
• 1988

This paper presents an approach to segment an image into areas of surfaces, and to compute the surface properties from a gray-scale image in order to describe the surfaces for reconstruction of the 3-D shape of the objects. In general, an rigid body has several surfaces and many edges. But if it is not polyhedoron, it is necessary not only to describe the relation between surfaces, i.e. its line drawings but also to represent the surfaces' equations itself. In order to compute the surfaces' equation we use a probability of edge distribution. At first it is extracted edges from a gray-level image as much as possible. These are not only the points that maximize the change of an image intensuty but candidates which can be seemed to be edges. Next, other character of a surface (color, coordinates and image intensity) are extracted. In our study, we call the all feature of a surface as "texture", for example color, intensity level, orientation of an edge, shape of a surface and so on. These features of a surface on a pixel of an image plane are mapped to a point of the feature space, and segmented to each groups by cluster analysis on this space. These groups are considered to represent object surface in an image plane. Finally, the states of object surface in 3-D space are computed from distributional probability of local and overall statistical features of a surface, and from shape of a surface.a surface.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.180-188
• /
• 2010

Hanryu phenomenon, referring to the fad for "all things South Korean" from the late 1990s, gave us an opportunities to realize the value of contents and the potential in business. As the government established promotion center to boost the contents industry, the number of departments on contents in colleges increased rapidly despite short history. This time provided a great background for the development of contents industry and training students. Specifically, the training courses in colleges for the students who major in contents has been the solid foundation of the excellent results in contents industries such as game, drama, film, animation and character. As the development and production of contents have been proceeded mostly in Seoul metropolitan area. If local promotion centers and colleges cooperate with each other for training students in this field, a successful business model will be established in local community with the help of local government and businesses. The objective of this study is to make an investigation into the promotion centers and the colleges that have departments on contents in Gyeongsangnamdo and Jeollanamdo, far from Seoul metropolitan area. This study may help to make suggestions for the next study through the investigation of promotion centers and colleges related to "Contents" in Gyeongsangnamdo and Jeollanamdo including cities under the direct control of the government.

• The Journal of Pediatrics of Korean Medicine
• /
• v.16 no.1
• /
• pp.105-124
• /
• 2002

With the progress of civilization, the disorders due to the stress, which derived from the social-structural complexity and diversity, are on an increasing trend in our times. Accordingly, the accurate diagnosis and appropriate treatment for them are required. Especially in the current years, children's disorders delivered by the emotional problems keep increasing. In this research, the researcher tried to figure out the cause of the children's stress and its treatment, studied the theories of the stress in the modem medicine and the sever emotions in oriental medicine, and came to the conclusion as follows: 1. The stress can be defined as the combination of the reaction to noxious stimuli and its defense mechanism of the body, In oriental medicine, it is considered as pathological notions which includes seven emotions as the internal factor, six evils as the external factor and other foods, expectoration, ecchymoma as the non-internal/external factors. 2. Children usually get stressed by various reasons in a growth process such as schooling, relationship with friends, the opposite sex of family, or change of surroundings, and these can cause the various disorders. 3. In the study of the children's stress symptoms, it is found that the silent reaction is uncommon. It usually appeared in both reactions: firs, physical reactions such as stomachache, vomiting, headache, neural frequent urination, bronchial asthma or excessive respiration and/or, second, behavioral reactions such as a decline of performance, alimentary disorder, e.g. anorexia nervosa or bulimia, sleep disorder, e.g. nightmare or panic in sleep, anthrophobia, refusal to a school attendance or hyperactiveness. Besides, the peculiar mental disorder such as paroxysm of anger, tic, autism, nocturnal enuresis, lack of attentiveness, impediment in linguistic development, learning difficulty, intellectual decline, etc. can be appeared, and the heavy stress during the babyhood can cause the regression of behavior or the immaturity of formation of character. 4. The appropriate treatments for the children's stress are Osteopathy, Manpulation, Aroma Therapy, Alexander Technique, Autonomic Never Control Treatment, Biofeedback, Chiropractic, Dance Therapy, Feldenkrasis Technique, Gravity Therapy, Homepathy, Aquatherapy, Hypnotherapy, Naturopathy and Meditation.

• Health Policy and Management
• /
• v.26 no.1
• /
• pp.12-23
• /
• 2016

Background: Many studies have explained regional disparities in health by socioeconomic status and healthcare resources, focusing on differences between urban and rural area. However some cities in Korea have the highest cardiovascular mortality, even though they have sufficient healthcare resources. So this study aims to confirm three hypotheses. (1) There are also regional health disparities between cities not only between urban and rural area. (2) It has different regional risk factors affecting cardiovascular mortality whether it is urban or rural area. (3) Besides socioeconomic and healthcare resources factors, there are remnant factors that affect regional cardiovascular mortality such as health behavior and physical environment. Methods: The subject of this study is 227 local authorities (si, gun, and gu). They were categorized into city (gu and si consisting of urban area) and non-city (gun consisting of rural area), and the city group was subdivided into 3 parts to reflect relative different city status: city 1 (Seoul, Gyeonggi cities), city 2 (Gwangyeoksi cities), and city 3 (other cities). We compared their mortalities among four groups by using analysis of variance analysis. And we explored what had contributed to it in whole authorities, city and non-city group by using multiple regression analysis. Results: Cardiovascular mortality is highest in city 2 group, lowest in city 1 group and middle in non-city group. Socioeconomic status and current smoking significantly increase mortality regardless of group. Other than those things, in city, there are some factors associated with cardiovascular mortality: walking practice(-), weight control attempt(-), deficiency of sports facilities(+), and high rate of factory lot(+). In non-city, there are other factors different from those of city: obesity prevalence(+), self-perceiving obesity(-), number of public health institutions(-), and road ratio(-). Conclusion: To reduce cardiovascular mortality and it's regional disparities, we need to consider differentiated approach, respecting regional character and different risk factors. Also, it is crucial to strengthen local government's capacity for practicing community health policy.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.166-171
• /
• 2014

The aim of this study is to examine the influences of spices on the amounts and compositions of volatile compounds released from cooked beef patty. Beef patty with 0.5% of spice (nutmeg, onion, garlic, or ginger powder, w/w) was cooked by electronic pan until they reached an internal temperature of $75^{\circ}C$. A total of 46 volatile compounds (6 alcohols, 6 aldehydes, 5 hydrocarbons, 6 ketones, 9 sulfur compounds, and 14 terpenes) from cooked beef patties were detected by using purge-and-trap GC/MS. The addition of nutmeg, onion, or ginger powder significantly reduced the production of the volatile compounds via lipid oxidation in cooked beef patty when compared to those from the control. Also, the addition of nutmeg and garlic powder to beef patty generated a lot of trepans or sulfur volatile compounds, respectively. From these results, the major proportion by chemical classes such as alcohols, aldehydes, hydrocarbons, ketones, sulfur compounds, and terpenes was different depending on the spice variations. The results indicate that addition of spices to the beef patty meaningfully changes the volatile compounds released from within. Therefore, it can be concluded that spices can interact with meat aroma significantly, and thus, the character of each spice should be considered before adding to the beef patty.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.5
• /
• pp.472-475
• /
• 2012

Objective : The aim of this study is to establish the value of hand elevation test as a reproducible provocative test for the diagnosis of carpal tunnel syndrome (CTS). Methods : We had a prospective study of 45 hands of 38 patients diagnosed with CTS between April 2005 and February 2009. The diagnosis of CTS was based on the American Academy of Neurology clinical diagnostic criteria. Experimental and control group patients underwent Tinel's test, Phalen's test, carpal compression test and hand elevation test as provocative tests for CTS. Results : We used chi-square analysis to compare Tinel's test and Phalen's test, carpal compression test with hand elevation test. The sensitivity and specificity of the hand elevation test is 86.7% and 88.9% each. Tinel's test had 82.2% sensitivity and 88.9% specificity. Phalen's test had 84.4% sensitivity and 86.7% specificity. Carpal compression test had 84.4% sensitivity 82.2% specificity. Comparisons of sensitivity and specificity between hand elevation test and Tinel's test, Phalen's test, and carpal compression test had no statistically significant differences. To compare the diagnostic accuracies of four tests, the area under the non-parametric receiver operating character curve was applied. Conclusion : The hand elevation test has higher sensitivity and specificity than Tinel's test, Phalen's test, and carpal compression test. Chi-square statistical analysis confirms the hand elevation test is not ineffective campared with Tinel's test, Phalen's test, and carpal compression test.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.459-463
• /
• 2000

Direct use of negative ions for modification of materials has opened new research such as charging-free ion implantation and new materials syntheses by pure kinetic bonding reactions. For these purposes, a new solid-state ce-sium ion source has been developed in the laboratory scale. In this paper, diamond like carbon(DLC) films were prepared on silicon wafer by a negative cesium ion gun. This system does not need any gas in the chamber; deposition occurs under high vacuum. The ion source has good control of the C- beam energy(from 80 to 150eV). The result of Raman spectrophotometer shows that the degree of diamond-like character in the films, $sp^3$ fraction, increased as ion beam energy increases. The nanoindentation hardness of the films also increases from 7 to 14 GPa as a function of beam energy. DLC films showed ultra-smooth surface(Ra~1$\AA$)and an impurity-free quality.