• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.59-62
• /
• 2017

In this paper, atmospheric pressure plasma treatment was proposed for high performance indium gallium zinc oxide thin film transistor (IGZO TFT). RF Ar plasma treatment is performed at room temperature under atmospheric pressure as a simple and cost effective channel surface treatment method. The experimental results show that field effect mobility can be enhanced by $2.51cm^2/V{\cdot}s$ from $1.69cm^2/V{\cdot}s$ to $4.20cm^2/V{\cdot}s$ compared with a conventional device without plasma treatment. From X-ray photoelectron spectroscopy (XPS) analysis, the increase of oxygen vacancies and decrease of metal-oxide bonding are observed, which suggests that the suggested atmospheric Ar plasma treatment is a cost-effective useful process method to control the IGZO TFT performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권7호
• /
• pp.2328-2344
• /
• 2022

2D human pose estimation still faces difficulty in low-resolution images. Most existing top-down approaches scale up the target human bonding box images to the large size and insert the scaled image into the network. Due to up-sampling, artifacts occur in the low-resolution target images, and the degraded images adversely affect the accurate estimation of the joint positions. To address this issue, we propose a multi-resolution input feature fusion network for human pose estimation. Specifically, the bounding box image of the target human is rescaled to multiple input images of various sizes, and the features extracted from the multiple images are fused in the network. Moreover, we introduce a guiding channel which induces the multi-resolution input features to alternatively affect the network according to the resolution of the target image. We conduct experiments on MS COCO dataset which is a representative dataset for 2D human pose estimation, where our method achieves superior performance compared to the strong baseline HRNet and the previous state-of-the-art methods.

• 방송공학회논문지
• /
• 제14권2호
• /
• pp.228-237
• /
• 2009

본 논문에서는 최근 많은 관심을 받고 있는 초 고화질 방송(Ultra-High Definition TV: UD-TV) 에 대하여 간략히 알아보고, 무선 채널에 비해 잡음의 영향이 적은 케이블 채널에서의 전송 가능성과 효율적인 전송방식에 대하여 살펴 보고자 한다. 국내 및 북미에서 디지털 케이블 방송의 전송 표준으로 채택하고 있는 오픈 케이블(OpenCable, J.83 Annex B) 시스템을 근간으로 하여, 기존의 256QAM에서 1024QAM으로 단순 확장된 시스템의 TOV(Threshold of Visibility) 증가를 살펴 보고, 이를 개선하기 위한 오류 정정 부호기의 부호율 변화 및 터보 부호의 적용을 통해 수정 확장된 시스템의 성능을 분석함으로써 수정 확장된 1024QAM 오픈 케이블 시스템의 최대 성능 한계를 알아본다. 그 결과 기존 오류 정정 부호기의 구조를 갖는 오픈 케이블 시스템은 31.5dB 이하의 신호 대 잡음비에서는 오류 없는 수신이 불가능하며, 그보다 낮은 TOV를 얻기 위해서는 기존 오류 정정 부호기의 수정이 불가피함을 확인했다. 또한 UD-TV의 전송 가능성을 기존 6MHz채널 대역폭 내에서의 섀논 한계(Shannon Capacity) 및 차세대 동영상 압축 기술과의 관계를 통해 고찰해 보고, 2개 이상의 채널을 결합하여 UD-TV를 전송하는 여러 가지 시나리오를 제시한다.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.79-84
• /
• 2016

유연전자소자가 외부힘에 의해 변형될 경우 반도체 다이가 기계적 응력 때문에 변형되거나 파괴되고 이러한 변형이나 파괴는 channel의 전자이동도를 변화시키거나 배선의 저항을 증가시켜 집적회로의 동작 오류를 발생시킨다. 따라서 반도체 집적회로는 굽힘 변형이 발생해도 기계적 응력이 발생하지 않는 중립축에 위치하는 것이 바람직하다. 본 연구에서는 굽힘변형을 하는 flip-chip 접합공정이 적용된 face-down flexible packaging system에서 중립축의 위치와 파괴 모드를 조사하였고 반도체 집적회로와 집중응력이 발생한 곳의 응력을 감소시킬 수 있는 방법을 제시하였다. 이를 위해, 설계인자로 유연기판의 두께 및 소재, 반도체 다이의 두께를 고려하였고 설계인자가 중립축의 위치에 미치는 영향을 조사한 결과 유연기판의 두께가 중립축의 위치를 조절하는데 유용한 설계인자임을 알 수 있었다. 3차원 모델을 이용한 유한요소해석 결과 반도체 다이와 유연기판 사이의 Cu bump 접합부에서 항복응력보다 높은 응력이 인가될 수 있음을 확인하였다. 마지막으로 flexible face-down packaging system에서 반도체 다이와 Cu bump 의 응력을 감소시킬 수 있는 설계 방법을 제안하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.132-136
• /
• 2004

The LAL (Limulus amebocyte lysate) test for the detection and quantification of endotoxin is based on the gelation reaction between endotoxin and LAL from a blood extract of Limulus polyphemus. The test is labor intensive, requiring dedicated personnel, a relatively long reaction time (approximately 1 h), relatively large volumes of samples and reagents and the detection of the end-point is rather subjective. To solve these problems, a miniaturized LOC (lab-on-a-chip) prototype, 62mm (L) ${\times}$ 18 mm (W), was fabricated using PDMS (polydimethylsiloxane) bonded to glass. Using this prototype, in which 2mm (W) ${\times}$ 44.3mm (L) ${\times}$ 100 $\mu\textrm{m}$ (D) microfluidic channel was constructed, turbidometric and chromogenic assay detection methods were compared, and the chromogenic method was found the most suitable for a small volume assay. In this assay, the kinetic-point method was more accurate than the end-point method. The PDMS chip thickness was found to be minimized to around 2 mm to allow sufficient light transmittance, which necessitated the use of a glass slide bonding for chip rigidity. Due to this miniaturization, the test time was reduced from 1 h to less than 10 min, and the sample volume could be reduced from 100 to ca. 4.4 ${\mu}$L. In summation, this study suggested that the LOC using the LAL test principle could be an alternative as a semi-automated and reliable method for the detection of endotoxin.

• 대기
• /
• 제15권1호
• /
• pp.35-46
• /
• 2005

Today, the outreach of National Meteorological Service such as PC cluster based Numerical Weather Prediction (NWP) technique is vigorous in the world wide. In this regard, WMO (World Meteorological Organization) asked KMA (Korea Meteorological Administration) to formulate a regional project, which cover most of RA II members, using similar technical system with KMA's. In that sense, Meteorological Research Institute (METRI) in KMA developed Mongolian NWP System (MNWPS) based on PC cluster and transferred the technology to Weather Service Center in Mongolia. The hybrid parallel algorithm and channel bonding technique were adopted to cut cost and showed 41% faster performance than single MPI (Message Passing Interface) approach. The cluster technique of Beowulf type was also adopted for convenient management and saving resources. The Linux based free operating system provide very cost effective solution for operating multi-nodes. Additionally, the GNU software provide many tools, utilities and applications for construction and management of a cluster. A flash flood event happened in Mongolia (2 September 2003) was selected for test run, and MNWPS successfully simulated the event with initial and boundary condition from Global Data Assimilation and Prediction System (GDAPS) of KMA. Now, the cluster based NWP System in Mongolia has been operated for local prediction around the region and provided various auxiliary charts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.217-217
• /
• 2016

The amorphous InGaZnO (a-IGZO) is widely accepted as a promising channel material for thin-film transistor (TFT) applications owing to their outstanding electrical properties [1, 2]. However, a-IGZO TFTs have still suffered from their bias instability with illumination [1-4]. Up to now, many researchers have studied the sub-gap density of states (DOS) as the root cause of instability. It is well known that defect states can influence on the performances and stabilities of a-IGZO TFTs. The defects states should be closely related with the deposition condition, including sputtering power, and pressure. Nevertheless, it has not been reported how these defects are created during conventional RF magnetron sputtering. In general, during conventional RF magnetron sputtering process, negative oxygen ions (NOIs) can be generated by electron attachment in oxygen atom near target surface and then accelerated up to few hundreds eV by a self-bias; at this time, the high energy bombardment of NOIs induce defects in oxide thin films. Recently, we have reported that the properties of IGZO thin films are strongly related with effects of NOIs which are generated during the sputtering process [5]. From our previous results, the electrical characteristics and the chemical bonding states of a-IGZO thin films were depended with the bombardment energy of NOIs. And also, we suggest that the deep sub-gap states in a-IGZO as well as thin film properties would be influenced by the bombardment of high energetic NOIs during the sputtering process.In this study, we will introduce our novel technology named as Magnetic Field Shielded Sputtering (MFSS) process to prevent the NOIs bombardment effects and present how much to be improved the properties of a-IGZO thin film by this new deposition method. We deposited a-IGZO thin films by MFSS on SiO2/p-Si and glass substrate at various process conditions, after which we investigated the morphology, optical and electrical properties of the a-IGZO thin films.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.74-78
• /
• 2003

본 논문에서는 금속의 표면 플라즈몬 공명으로 인한 금속-유전체 경계면에서의 국소적 전자기장의 강화 효과를 이용하여 표면 플라즈몬을 유발하는 금 박막을 유리 기판위에 증착하고, 프리즘 커플러를 이용한 소산장의 공명 흡수현상을 이차원 영상 으로 얻었다. 특히 DNA/단백질 칩 등 향후 가능한 다채널 시스템에의 응용을 고려하여11-MUA, 11-MUOH 등 자기조립 단분자막(SAM)을 크롬 마스크와 리토그래피, 그리고 Shadow mask와 광 산화반응을 이용하여 금 표면 위에 패터닝 하였다. 텅스텐-할로겐 램프와 중심파장이 ${\lambda}_0=633$ nm의 대역통과 필터를 사용하여 이 평행광을 프리즘 커플러에 입사시켜 반사되어 나오는 반사광의 이차원 영상을 얻었다. 이와는 별도로 ${\lambda}_0=633$ nm의 레이저를 이용하여 단분자막이 코팅되어 있을 때와 없을 때의 공명각의 변화를 관찰하였다. 얻어진 이차원 영상의 위치에 따른 화소 값의 변화를 단분자 막의 두께의 변화에 따라 보정하고, 알려진 매질의 SPR 특성을 Fresnel 방정식에 따라 이론적으로 계산하면 다채널 표면 영상으로부터 항원-항체 등 단백질의 결합 정도를 정량적으로 측정할 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.227-231
• /
• 2005

We have developed a microsystem with a capillary electrophoresis (CE) and an electrochemical detector (ECD). The microfabricated CE-ECD systems are adequate for a disposable type and the characteristics are optimized for an application to the electrochemical detection. The system was realized with polydimethylsiloxane (PDMS)-glass chip and indium tin oxide electrode. The injection and separation channels (80 um wide$\ast$40 um deep) were produced by moulding a PDMS against a microfabricated master with relatively simple and inexpensive methods. A CE-ECD systems were fabricated on the same substrate with the same fabrication procedure. The surface of PDMS layer and ITO-coated glass layer was treated with UV-Ozone to improve bonding strength and to enhance the effect of electroosmotic flow. For comparing the performance of the ITO electrodes with the gold electrodes, gold electrode microchip was fabricated with the same dimension. The running buffer was prepared by 10 mM 2-(N-morpholino)ethanesulfonic acid (MES) titrated to PH 6.5 using 0.1 N NaOH. We measured olectropherograms for the testing analytes consisted of catechol and dopamine with the different concentrations of 1 mM and 0.1 mM, respectively. The measured current peaks of dopamine and catechol are proportional to their concentrations. For comparing the performance of the ITO electrodes with the gold electrodes, electropherograms was measured for CE-ECD device with gold electrodes under the same conditions. Except for the base current level, the performances including sensitivity, stability, and resolution of CE-ECD microchip with ITO electrode are almost the same compared with gold electrode CE-ECD device. The disposable CE/ECD system showed similar results with the previously reported expensive system in the limit of detection and peak skew. When we are using disposable microchips, it is possible to avoid polishing electrode and reconditioning.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.47-53
• /
• 2015

본 논문은 미세유체채널에 채워진 유체를 이용하여 위상응답을 제어하는, 잉크젯 프린터로 인쇄된 미세유체채널 복합 좌 우향 전송선로(CRLH TL: Composite Right/Left Handed Transmission Line)를 제안한다. 제안된 CRLH TL은 종이 위에 은 나노입자 잉크를 이용하여 인쇄되었으며, Poly Methyl Methacrylate(PMMA)에 레이저 식각을 이용하여 제작된 미세유체채널은 잉크젯 프린터로 인쇄된 접착물질인 SU-8을 이용하여 CRLH TL 위에 부착되었다. 제안된 CRLH TL은 미세유체채널에 채워진 유체에 따라서 위상응답을 변화시킬 수 있으며, 미세유체채널에 각기 다른 유체가 흐를 때, 900 MHz에서 -10 dB 이하의 반사계수를 유지한 상태로 위상 지연, $0^{\circ}$ 위상, 위상 앞섬 특성을 모두 나타낼 수 있음을 확인하였다. 제안된 CRLH TL의 성능은 시뮬레이션 결과와 측정 결과를 통하여 성공적으로 증명되었다.