• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.358-366
• /
• 2007

Recently, FCC(Federal Communications Commission) has considered for that unlicensed device leases licensed devices' channel to overcome shortage of communication channels. Therefore, IEEE 802.22 WRAN(Wireless Regional Area Networks) working group progresses CR (Cognitive Radio) technique that is able to sense and adopt void channels that are not being occupied by the licensed devices. Channel selection is of the utmost importance because it can affect the whole system performance in CR network. Thus, we propose a policy-based dynamic channel selection architecture for cognitive radio network to achieve an efficient communication. We propose three kinds of method for channel selection; the first one is weighted channel selection, the second one is sequential channel selection, and the last one is combined channel selection. We can obtain the optimum channel list and allocates channels dynamically using the proposed protocol.

• Journal of Distribution Science
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2022

Purpose: This study aims at understanding the impacts of three omnichannel attributes (channel transparency, channel uniformity, channel convenience) and four customer perceptions (perceived innovativeness, perceived personalization, perceived risk, perceived credibility) on customer experience and channel selection decision. Research design and methodology: A quantitative online survey with 356 shoppers was executed. The partial least squares linear structural model (PLS-SEM) and Smart PLS were adopted to analyze the collected data and test the proposed hypotheses. Results: The research findings indicate four dominant results: (i) The customers' channel selection is directly determined by customer experience; perceived innovativeness; perceived personalization; perceived risk; and perceived credibility; and (ii) among these, the perceived risk shows negative impact on the customer's experience and customers' channel selection whereas others reveal the positive status; (iii) The customer experience represents the most decisive impact on the channel selection, then perceived personalization, perceived credibility, perceived innovativeness, and perceived risk. (iv) Three proposed channel attributes (transparency, uniformity, convenience) significantly influence the overall customer experience. Conclusions: This research adds to the body of knowledge in omnichannel retailing, customer experience, and customer channel selection. Furthermore, this research provides omnichannel retailers with practical implications for improving customer channel selection.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.952-961
• /
• 2016

In this paper, we study a spectrum sharing network (SSN) where a spectrum sharing device (SSD) coexists with multiple wireless communication systems (WCSs) in the same channel. The SSD can operate with either a duty cycle (DC) channel access mechanism or a listen-before-talk (LBT) channel access mechanism, whereas WCSs operate with an LBT mechanism. An opportunistic channel selection scheme for the SSD in the SSN is first proposed to minimize the outage probability. The optimal data transmission time for the DC-based SSD is derived to further improve the outage probability. We also derive the exact and closed-form outage probability of the proposed channel selection in the SSN by assuming that the number of WCSs operating in each channel is uniformly distributed. The simulation results show that the proposed channel selection scheme outperforms other channel selection schemes. It was also observed that a DC-based SSD with an optimal data transmission time provides a better outage performance than an LBT-based SSD. As the number of available channels increases, the channel selection scheme plays an important role in minimizing the outage probability of the SSNs.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.9-16
• /
• 2015

In this paper, selection criterions on selection diversity are researched. The diversity is applied to the multiple antenna system based on wireless access in vehicular environment (WAVE) standard for rapid varying channel. Least squares (LS) based decision feedback equalizer (DFE) are used for channel equalization. Received signal is regenerated by means of the decision feedback path. In the selection diversity, the regenerated signal as well as the received signal is selected according to selection criterion. The decision feedback algorithm can follow the fast speed of WAVE fading channel. To control the tracking speed of the time-varying channel, simple low pass filter is used. Finally, the estimated channel value recovers the distorted payloads. Signal power before automatic gain control (AGC) in analog stage can be used as a selection criterion. In the digital stage, signal power after AGC, noise power after AGC, signal to noise ratio after AGC and cross-correlation method can be used as selection criterions. According to the simulation results, the performance of the selection diversity is improved in comparison with that of the combining diversity for the WAVE fading channel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1767-1769
• /
• 2011

In a CR (cognitive radio) network, channel selection is one of the important issues for the efficient channel utilization. When the CR user exploits the spectrum of primary network, the interference to the primary network should be minimized. In this paper, we propose a spectrum hole prediction based channel selection scheme to minimize the interference to the primary network. To predict spectrum hole, statistic properties of primary user's traffic is used. By using the predicted spectrum hole, channel is selected and it can reduce the possibility of interference to the primary user and increase the efficiency of spectrum utilization. The performance of proposed channel selection scheme is evaluated by the computer simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.2
• /
• pp.1-9
• /
• 1980

A voltage synthesizing channel selection circuit was designed to improve on the conventional vol tape synthesizer which has been memorized each charnel's tuning vol cage itself. In the course of this study, tuning voltage was calculated by channel number entered from 10 keys. Then this circuit has tie function of direct access channel selection and rear display of channel number for the whole range of UHF and VHF, Attention was also given to realize the fine tuning by searching each commended channel, and the sequential selection by using 2keys, and the flash of channel indicator in case of inactive station.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.682-686
• /
• 2016

A fully differential RC calibrator for accurate cut-off frequency of a programmable channel selection filter is proposed. The proposed RC calibrator consists of an RC timer, clock generator, synchronous counter, digital comparator, and control block. To verify the proposed RC calibrator, a six-order Chebyshev programmable low-pass filter with adjustable 3 dB cut-off frequency, which is controlled by the proposed RC calibrator, was implemented in a $0.18-{\mu}m$ CMOS technology. The channel selection filter with the proposed RC calibrator draws 1.8 mA from a 1.8 V supply voltage and the measured 3 dB cut-off frequencies of the channel selection LPF is controlled accurately by the RC calibrator.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.99-105
• /
• 2012

Recently, there are many user selection algorithms in multi user multiple-input multiple-output (MU-MIMO) systems. One of well-known user selection methods is Semi orthogonal user selection (SUS). It is an algorithm maximizing channel capacity. However, it is applicable only when user's antenna is one. We propose a generalized user selection algorithm regardless of the number of user's antennas. In the proposed scheme, Base station (Bs) selects the first user who has the highest determinant of channel and generates a user group that correlation with first user's channel is less than allowance of correlation. Then, each determinant of channels made up of first user's channel and a user's channel in the generated group is calculated and BS selects the next user who has the highest determinant of that. BS selects following users by repeating above procedure. In this paper, we get better performance because of selecting users who have the highest determinant of channel as well as allowance of correlation optimally calculated through matrix operations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.40-47
• /
• 2012

In dual-hop relaying systems, the conventional partial relay selection is based on the channel information only for the first hop. On the other hand, the efficient partial relay selection is based on the channel information for the hop with the minimum of the average channel powers for the first and second hops at each end-to-end link since the correlation coefficient between the end-to-end link quality and the link quality of the hop with the minimum of the average channel powers for the first and second hops is larger than that between the end-to-end link quality and the link quality of the other hop. In this paper, the outage probability of the conventional partial relay selection and the efficient partial relay selection in dual-hop decode-and-forward relaying systems is analyzed for non-identically distributed Rayleigh fading channels. Through numerical investigation, the outage performance of the efficient partial relay selection is compared with the outage performances of the conventional partial relay selection and the best relay selection based on all the channel information for the first and second hops.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.94-98
• /
• 2009

In this paper, we propose a new channel estimation scheme for amplify and forward cooperative diversity with relay selection. In order to select best relay, it is necessary to know channel state information (CSI) at the destination. Most of the previous works, however, assume that perfect CSI is available at the destination. In addition, when the number of relay is increased it is difficult to estimate CSI through all relays within coherence time of a channel because of the large amount of frame overhead for channel estimation. In a proposed channel estimation scheme, each terminal has distinct pilot signal which is orthogonal each other. By using orthogonal property of pilot signals, CSI is estimated over two pilot signal transmission phases so that frame overhead is reduced significantly. Due to the orthogonal property among pilot signals, estimation error does not depend on the number of relays. Simulation result shows that the proposed channel estimation scheme provides accurate CSI at the destination.