• 제목/요약/키워드: Channel Recovery

Search Result 265, Processing Time 0.028 seconds

하천 내 횡적 연결성 회복을 통한 흐름 해석 (Flow Analysis Based on the Recovery of Lateral Connectivity in the River)

  • 이진우;전승훈;김규호;김창완
    • 한국습지학회지
    • /
    • 제16권2호
    • /
    • pp.213-220
    • /
    • 2014
  • 최근 하천정비는 환경에 대한 인식이 높아지면서 이수 및 치수뿐만 아니라 하천환경에 대한 관심이 증가하는 쪽으로 바뀌어가고 있는 실정이다. 따라서, 하천환경 또는 하천복원이 하천사업의 핵심이 되고 있다. 우리나라의 경우, 대부분의 하천이 치수목적의 하천정비에 의해 홍수조절과 주운을 돕기 위해 직강화 되었다. 하도를 직강화 할 경우 안정성 유지가 중요하므로 하천을 따라 제방이 축조된다. 이와같이 이수와 치수를 목적으로 하천에 축조된 댐, 보, 제방 및 수문 등과 같은 구조물의 경우, 하천의 종 횡적 연결성(Connectivity)을 저해하는 요인이 된다. 연결성이란 어떤 서식처에서 다른 서식처로 에너지와 물질을 이동시키거나 자연적인 수로를 통하여 서식처 간을 물리적으로 연결하는 동적인 자연통로로써 장기적인 하천복원관점에서 볼 때 연결성 증대는 유역 내 건강한 생태계 조성을 위해 매우 중요하다. 본 연구에서는 횡적 연결성 회복을 통한 하천복원의 첫 번째 단계로써 연결성에 대한 기본개념을 설명하고 대상유역을 선정하여 연결성을 저해하는 격리, 차단 공간의 유무에 따른 유역 내 흐름양상의 변화를 수치모의 하였다. 본 연구의 결과는 유역 내 수리수문연결기술 개발로 이어질 수 있을 것으로 판단되며, 차후 하천복원사업에 기여할 수 있을 것으로 판단된다.

AIP면 유동측정 정확도 향상을 위한 가스터빈엔진 입구덕트 설계 연구 (Design Study of Engine Inlet Duct for Measurement Improvement of the Flow Properties on AIP)

  • 임주현;김성돈;김용련
    • 한국추진공학회지
    • /
    • 제21권3호
    • /
    • pp.49-55
    • /
    • 2017
  • 가스터빈엔진의 성능시험을 위한 엔진 입구덕트를 1D 기법으로 Sizing 하였으며, 압축기 입구유동측정면(AIP, Aerodynamic interface plane)에서 경계층 두께를 최소화하고, 코어부 마하수분포가 균일하도록 설계하였다. 노즈콘 형상은 Haack-series 모델을 적용하고, 덕트 안쪽과 바깥쪽 면적변화율이 동일하도록 입구덕트 채널 바깥반경($r_o$)를 결정하여 설계목적을 구현하고자 하였으며, 이러한 형상이 설계목표에 부합하는지 확인하기 위하여 CFD를 수행하였다. AIP면에서 정압력분포는 최대값과 최소값 차이가 0.16% 이었으며, 마하수분포에서 경계층은 덕트반경 길의 2% 이내로 설계목표를 만족하였다. 이때 균일유동 코어부는 채널높이의 95% 이상이었다. 또한 입구유동의 전온도를 측정하기 위한 키엘 전 온도레이크 위치는 온도 회복계수가 최대화 되도록 마하수가 0.1 이하 지역인 노즈콘 전방 100 mm 이내이어야 함을 확인하였다.

Effect of Calmodulin on Ginseng Saponin-Induced $Ca^{2+}$-Activated $Cl^{-}$ Channel Activation in Xenopus laevis Oocytes

  • Lee Jun-Ho;Jeong Sang-Min;Lee Byung-Hwan;Kim Jong-Hoon;Ko Sung-Ryong;Kim Seung-Hwan;Lee Sang-Mok;Nah Seung-Yeol
    • Archives of Pharmacal Research
    • /
    • 제28권4호
    • /
    • pp.413-420
    • /
    • 2005
  • We previously demonstrated the ability of ginseng saponins (active ingredients of Panax ginseng) to enhance $Ca^{2+}$-activated $Cl^{-}$ current. The mechanism for this ginseng saponin-induced enhancement was proposed to be the release of $Ca^{2+}$ from $IP_{3}-sensitive$ intracellular stores through the activation of PTX-insensitive $G\alpha_{q/11}$ proteins and PLC pathway. Recent studies have shown that calmodulin (CaM) regulates $IP_{3}$ receptor-mediated $Ca^{2+}$ release in both $Ca^{2+}-dependent$ and -independent manner. In the present study, we have investigated the effects of CaM on ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current responses in Xenopus oocytes. Intraoocyte injection of CaM inhibited ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement, whereas co-injection of calmidazolium, a CaM antagonist, with CaM blocked CaM action. The inhibitory effect of CaM on ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement was dose- and time-dependent, with an $IC_{50} of 14.9\pm3.5 {\mu}M$. The inhibitory effect of CaM on saponin's activity was maximal after 6 h of intraoocyte injection of CaM, and after 48 h the activity of saponin recovered to control level. The half-recovery time was calculated to be $16.7\pm4.3 h$. Intraoocyte injection of CaM inhibited $Ca^{2+}$-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement and also attenuated $IP_{3}$-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement. $Ca^{2+}$/CaM kinase II inhibitor did not inhibit CaM-caused attenuation of ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement. These results suggest that CaM regulates ginseng saponin effect on $Ca^{2+}$-activated $Cl^{-}$ current enhancement via $Ca^{2+}$-independent manner.

포스트 코로나 뉴노멀에 대한 대중감성 연구: 소셜미디어(SNS) 빅데이터 분석을 통해 (Research on public sentiment of the post-corona new normal: Through social media (SNS) big data analysis)

  • 안명숙
    • 문화기술의 융합
    • /
    • 제8권2호
    • /
    • pp.209-215
    • /
    • 2022
  • 본 연구의 목적은 '포스트 코로나 뉴노멀'에 관한 소셜 미디어(social media) 빅데이터를 분석하여 한국사회에서 '포스트코로나 뉴노멀'에 대한 대중 인식을 감성 측면에서 살펴봄으로서 포스트 코로나 시대를 선제적으로 대처하기 위한 기초자료를 제공하는 것이다. 자료 수집 및 분석을 위하여 빅데이터 분석 프로그램인 '텍스톰' (textom)의 감성분석 프로그램을 활용하였다. 데이터 수집기간은 2020년 10월 5일부터 2021년 10월 5일까지 1년이고, 수집 채널은 다음(daum)과 네이버(naver)의 블로그, 카페, 트위터 및 페이스북으로 설정하였다. 이 채널에서 수집된 총 3,770개의수집텍스트를 편집, 정제한 원문데이터가 본 연구를 위해 사용되었다. 분석의 결과는 다음과 같다. 첫째, '포스트 코로나 뉴노멀'에 대해 호감과 흥미 감성이 가장 높다. 즉 일상 회복과 기술 성장 및 새로워진 미래에 대한 기대 등 낙관적 감성이 77.62%로 주도적임을 알 수 있다. 둘째, 슬픔과 거부감 같은 부정 감성은 전체의 22.38%이나, 감성의 강도는 23.91%로 비율보다 높아 이 부정 감성이 강렬하다는 것을 시사한다. 본 연구는 '포스트 코로나 뉴노멀'에 대한 빅데이터 분석을 통해서 대중의 긍정 및 부정감성의 세부 요인분석의 기여도가 있다.

기존 방조제에 설치 가능한 조력발전 장치 개발 - 개수로 현장실험 검증 (The Development of Tidal Power System Can be Installed in Existing Dykes - The Open Channel Experimental Verification)

  • 최혁진;고동휘;오남선;정신택
    • 한국해안·해양공학회논문집
    • /
    • 제35권1호
    • /
    • pp.13-21
    • /
    • 2023
  • 에너지 자원의 안정적 확보 어려움, 화석연료 이용에 따른 온실가스 방출로 지구 온난화 현상 등의 문제가 대두됨에 따라 재생에너지 개발에 대한 관심이 증가하고 있다. 조석현상은 일정한 주기를 가지고 정기적으로 발생하는 규칙성이 존재하므로 사전에 정확한 예측이 가능하여 에너지 회수 측면에서 이점이 있다. 따라서 조석을 에너지원으로 활용하기 위한 다양한 방법이 고안되어왔다. 방조제를 활용한 조력발전은 많이 운영되는 대표적인 방식이지만, 조지내 조차 감소, 수질 변화, 생태계 변화 등으로 조력발전 사업 추진이 지연되거나 중단되고 있다. 본 연구에서는 방조제가 이미 설치되어 있는 해역에 적용가능한 조력발전 장치의 개발 및 성능 검증을 위하여 현장실험을 실시하였다. 2개의 수조 및 관수로, 개수로, 웨어 그리고 수차 및 발전기를 이용하여 4종류의 실험을 수행한 결과, 10 kW 이상의 출력과 효율 60% 이상이 가능한 발전시스템 개발 가능성을 확인하였다. 이러한 연구결과는 기존 방조제를 활용한 소규모 조력발전에 활용할 수 있다.

뇌 자기공명영상에서 Heavily T2 FLAIR와 DWI 기법의 영상비교 (Image Comparison of Heavily T2 FLAIR and DWI Method in Brain Magnetic Resonance Image)

  • 구은회
    • 방사선산업학회지
    • /
    • 제17권4호
    • /
    • pp.397-403
    • /
    • 2023
  • The purpose of this study is to obtain brain MRI images through Heavenly T2 FLAIR and DWI techniques to find out strengths and weaknesses of each image. Data were analyzed on 13 normal people and 17 brain tumor patients. Philips Ingenia 3.0TCX was used as the equipment used for the inspection, and 32 Channel Head Coil was used to acquire data. Using Image J and Infinity PACS Data, 3mm2 of gray matter, white matter, cerebellum, basal ganglia, and tumor areas were set and measured. Quantitative analysis measured SNR and CNR as an analysis method, and qualitative analysis evaluated overall image quality, lesion conspicuity, image distortion, susceptibility artifact and ghost artifact on a 5-point scale. The statistical significance of data analysis was that Wilcox-on Signed Rank Test and Paired t-test were executed, and the statistical program used was SPSS ver.22.0 and the p value was less than 0.05. In quantitative analysis, the SNR of gray matter, white matter, cerebellum, basal ganglia, and tumor of Heavily T2 FLAIR is 41.45±0.13, 40.52±0.45, 41.44±0.51, 40.96±0.09, 35.28±0.46 and the CNR is 15.24±0.13, 16.75±0.23, 16.28±0.41, 15.83±0.17, 16.63±0.51. In DWI, SNR is 32.58±0.22, 36.75±0.17, 30.21±0.19, 35.83±0.11, 43.29±0.08, and CNR is 13.14±0.63, 14.21±0.31, 12.95±0.32, 11.73±0.09, 17.56±0.52. In normal tissues, Heavenly T2 FLAIR obtained high results, but in disease evaluation, high results were obtained at DWI, b=1000 (p<0.05). In addition, in the qualitative analysis, overall image quality, lesion conspicuity, image distortion, susceptibility artifact and ghost artifact aspects of the Heavily T2 FLAIR were evaluated, and 3.75±0.28, 2.29±0.24, 3.86±0.23, 4.08±0.21, 3.79±0.22 values were found, respectively, and 2.53±0.39, 4.13±0.29, 1.90±0.20, 1.81±0.21, 1.52±0.45 in DWI. As a result of qualitative analysis, overall image quality, image distortion, susceptibility artifact and ghost artifact were rated higher than DWI. However, DWI was evaluated higher in lesion conspicuity (p<0.05). In normal tissues, the level of Heavenly T2 FLAIR was higher, but the DWI technique was higher in the evaluation of the disease (tumor). The two results were necessary techniques depending on the normal site and the location of the disease. In conclusion, statistically significant results were obtained from the two techniques. In quantitative and qualitative analysis, the two techniques had advantages and disadvantages, and in normal and disease evaluation, the two techniques produced useful results. These results are believed to be educational data for clinical basic evaluation and MRI in the future.

흰쥐 적출 방광 배뇨근의 수축성에 대한 Imipramine의 작용과 Calcium동원 기전과의 관계 (Mechanism of Inhibitory Effect of Imipramine on Isolated Rat Detrusor Muscle in Relation to Calcium Modulation)

  • 이종범;유계준;하정희;권오철;이광윤;김원준
    • 대한약리학회지
    • /
    • 제28권1호
    • /
    • pp.81-89
    • /
    • 1992
  • 항우울제에 속하는 imipramine은 유뇨증에 대한 치료제로서도 널리 사용되고 있다. Imipramine이 유뇨증 치료제로서의 명백한 치료효과를 보이기는 하나, 그 작용기전에 대해서는 아직 논란이 많다. 그 중 가장 유력한 설은 말초성 자율신경에 대한 작용으로서 무스카린성 길항작용과 교감신경말단에서의 catecholamine 재섭취 방해작용 및 직접적인 방광근 이완 작용 등이 제시되고 있다. 또 최근에는 방광 평활근에 대한 직접작용에 칼슘 이동 억압 작용이 중요한 역할을 한다고 주장되고 있다. 이에 본 실험에서는 흰쥐의 적출방광 배뇨근 절편을 사용하여 imipramine의 항유뇨작용과 calcium동원과의 관련성을 추구하여 다음과 같은 결과를 얻었다. 1. 배뇨근 절편은 전기장자극에 의해 주파수의존적으로 수축하였는데, 이 전기장자극 유발 수축반응은 imipramine에 의해 농도 의존적으로 억제되었고 고농도에서는 완전히 소실되었으나, atropine에 의해서는 고농도에서도 소실되지 않았다. 2. Imipramine은 자발수축 및 기본 장력에 대하여 이들을 농도 의존적인 양상으로 억제하였으며, 이 억제작용은 diltiazem에 의한 억제와 유사하였다. 그러나 atropine은 배뇨근절편의 기본장력이나 자발수축에 아무런 영향도 미치지 않았다. 3. $^*Imipramine$은 bethanechol 유발수축과 adenosine triphosphate (ATP) 유발수축을 농도의존적으로 억압하였다. 4. Imipramine은 칼슘배제용액에서 칼슘 첨가에의한 수축성의 회복을 억제하였는데, 이러한 작용은 diltiazem보다 그 효력이 낮았으나 그 작용양상은 유사하였다. 5. Imipramine에 의해 감소되었던 배뇨근절편의 기본장력은 calcium ionophore인 A23187에 의해 회복되었다. 칼슘배제 영양액에 장시간 노출됨으로써 기본장력은 소실되었으며, imipramine을 전처치한 경우는 A23187첨가에 의해 장력이 회복되지 않았으나, 세포내칼슘 유리억제제인 trimethoxybenzoic acid 8-(diethylamino)octyl ester [TMB-8]을 전처치한 경우 A23187은 배뇨근의 기본장력을 현저히 회복시켰다. 이상의 결과로 미루어 보아 imipramine의 배뇨근 수축 억제작용의 기전에는 무스카린성 및 퓨린성 수용체봉쇄작용도 관여하나, 주된 기전은 평활근세포에 직접 작용하여 세포외 칼슘의 유입을 억제하는 것으로 사료된다.

  • PDF

설비공학 분야의 최근 연구 동향: 2014년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제27권7호
    • /
    • pp.380-394
    • /
    • 2015
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

캐나다 Athabasca 오일샌드의 투수도 모델링을 위한 다양한 탄성파 속성들을 이용한 상 구분 향상 (Improvement in facies discrimination using multiple seismic attributes for permeability modelling of the Athabasca Oil Sands, Canada)

  • Kashihara, Koji;Tsuji, Takashi
    • 지구물리와물리탐사
    • /
    • 제13권1호
    • /
    • pp.80-87
    • /
    • 2010
  • 본 연구는 Athabasca 오일샌드광구의 역청 생산방법인, SAGD 수행에 영향을 주는 불균질한 유효투수도의 분포도를 만드는 저류층 모델링 작업 공정을 개발하기 위한 것이다. 암석학적 상 분포는 연구 지역 역청 저류층 내의 불균질성의 주요 원인이다. 대상 매질은 사암과 이암으로 구성된 하천에서 바다로 이어지는 채널로서 이암이 유체의 흐름을 방해해 유효 투수도를 감소시키고 있다. 본 연구에서는 암석학적 상등을 이암의 모양에 따라 마른 특성의 유효투수도를 갖는 세 종류로 분류하였다. 본 연구의 저류층 모델링 작업과정은 상 모델과 투수도 모델링, 두 가지 주요 모듈로 구성되어 있다. 상 모델링은 확률적인 접근을 이용하여 유효투수도 결정에 중요한, 세가지 상등 중에 어떤 종류에 속하는지를 알려준다. 투수도 모델링은 먼저 이암의 체적율을 구하고 그것을 유효투수도로 변환시킨다. 암석상들의 소형 모델에 대한 일련의 시뮬레이션 적용을 통해 이암 체적율을 유효투수도로 변환시키는 변환함수를 얻는다. 탄성파 자료는 지구통계학적 방법으로 상 모델링에 입력되는 상등의 우선 확률을 제공함으로써 상 모델링에 기여한다. 특히, 본 연구에서는 상들의 우선 확률을 개선하기 위해 상등의 예측 시 다양한 탄성파 속성들을 복합적으로 사용하는 신경망 방법을 이용하였다. 상 구분에 있어서의 얼마만큼 개선되었는지를 보여주기 위해 상 모델링 시 개선된 우선 확률을 사용한 결과를 단일 탄성파 속성을 이용하는 기존 방법의 결과와 비교하였다. 다중 탄성파 속성들의 복합적인 사용에서 밀도와 P파 속도를 조합해서 이용하는 것이 상구분을 향상시키는데 필수적이다. 또한 본 연구에서는 검층으로부터 얻은 공극률과 P파 속도, 사진찍은 것 같이 예측된 이암의 부피를 이용하여 sand matrix의 공극률이 정확하게 평가원 연구지역에서, 다른 상등 사이에서 P파 속도가 달라지게 하는 sand matrix의 공극률에 대해서도 논의하였다.

삼차원 자기공명영상법의 뇌 구조 영상을 위한 최적화 연구: 센스인자 변화에 따른 신호변화 평가 (Optimizations of 3D MRI Techniques in Brain by Evaluating SENSE Factors)

  • 박명환;이진완;이강원;류창우;장건호
    • Investigative Magnetic Resonance Imaging
    • /
    • 제13권2호
    • /
    • pp.161-170
    • /
    • 2009
  • 목적 : 평행영상(Parallel imaging)기법의 개발로 긴 촬영시간 때문에 종종 사용되지 못하던 삼차원 영상기법이 최근 들어 환자 병을 진단하는데 새로이 사용되고 있다. 이 연구의 목적은 최근에 뇌 영상에서 개발되어 이용되고 있는 삼차원 자기공명영상을 사람의 뇌에서 짧은 시간 내에 얻을 수 있도록 2차원 평행영상 기법을 사용한 최적화 방법을 연구하는데 있다. 대상 및 방법 : 검사 장비는 3.0T 자기공명영상장치를 이용하였으며 8-채널 SENSE(sensitivity encoding) 머리 코일을 이용하였다. 팬텀 및 3명의 사람 머리에서 영상을 얻었다. 세 가지의 삼차원 영상법인 3D T1WI, 3D T2WI 및 3D FLAIR 영상 방법에 대하여 평행인자(SENSE factor)의 변화에 따른 팬텀 영상을 얻었다. 각각의 영상법에서 영상획득에 적당한 SENSE 인자를 찾기 위해 Phase encoding 방향과 Slice encoding 방향을 조합한 SENSE 인자를 변화시키면서 영상을 얻었다. 영상분석을 위하여 특정영역(ROI)를 설정한 후에 신호대 잡음비 (Signal-to-noise ratio, SNR), 감소분율(Percent Signal Reduction Rate, %R), 대조도(contrast-to-noise ratio, CNR)를 계산하였다. 결과 : 팬텀을 이용한 SENSE 인자 변화에 따른 SNR 및 %R 값의 변화 결과 3D T1WI 방법에서 SENSE 인자를 사용한 것들 중에서 SENSE 인자를 총 3인 경우 약 0.2%의 신호 감소가 나타났고 영상시간은 5분 이내였다. 3D T2WI 방법의 경우 SENSE 인자를 사용한 것들 중에서 SENSE 인자를 총 3인 경우에 약 1.0% 신호 감소가 나타났고 영상 시간은 약 5분 이내였다. 3D FLAIR 방법의 경우 SENSE 인자를 사용한 것들 중에서 SENSE 인자를 4를 사용한 경우에 약 0.2% 신호 감소가 나타났고 영상시간은 약 6분이었다. 사람을 대상으로 할 경우 3D T1W 및 3D T2W영상에서 SNR 및 CNR은 SENSE 인자를 3으로 한 경우에서 SENSE 인자를 4로 한 경우 보다 높게 나타났다. 3D FALIR 영상의 경우 CNR은 SENSE 4에서는 SENSE 3에 비하여 낮았다. 결론 : 본 연구에서는 3가지 3차원 영상법을 실제 임상적용이 가능한 시간 영역에서 SENSE 인자를 변화 시키면서 치적의 영상을 얻도록 하는 연구를 실시한 결과 SNR 감소를 최소화 하면서 영상획득 시간을 약 5분에서 6분 정도 소요되는 2차원 SENSE 인자를 찾았다. 이를 뇌 영상에 적용하였을 경우 SENSE 인자를 적용하지 않은 경우와 비교하면 신호 감소는 최소화 하면서 영상의 질은 큰 영향을 주지 않은 것으로 나타났다. 3D T1W및 3D T2W는 SENSE 인자를 3으로 3D FLAIR인자는 SENSE 인자를 4로 하는 것이 환자를 대상으로 한 뇌 영상에 적합하다고 생각된다. 앞으로는 이들 영상법이 뇌 영상뿐만 아니라 다른 영역의 영상에 적용을 위한 최적화가 필요하다고 생각된다.

  • PDF