• 소성∙가공
• /
• 제18권6호
• /
• pp.476-481
• /
• 2009

The present work demonstrates the mechanical and electrical responses of submicrocrystalline Cu-3%Ag alloy as a function of strain imposed by equal channel angular pressing(ECAP). From transmission electron microscope observation, the resulting microstructures of Cu-3%Ag alloy deformed by ECAP for 8-pass or more consist of reasonably fine, equiaxed grains without having a strong preferred orientation, suggesting that microstructure evolution is slower than that of pure-Al and its alloys owing to low stacking fault energy. The results of room temperature tension tests reveal that, as the amount of applied strain increases, the tensile strength of submicrocrystalline Cu-3%Ag alloy increases whereas losing both the ductility and the electrical conductivity. Such phenomenon can be explained based on microstructure featured by the non-equilibrium grain boundaries.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.800-811
• /
• 2016

This study aims to extract the multi-channel attributes of Dongdaemun-based fashion brands and consider the effects of these attributes on customer equity, customer satisfaction and re-purchase intention. In total, 493 samples of those who have purchased Dongdaemun-based fashion brand products using multi-channels were collected for the final data analysis, which was performed using SPSS 21.0 and AMOS 18.0. The findings of study are as follows. Among the multi-channel attributes of Dongdaemun-based fashion brands, entertainment and informativeness had a significant effect on all customer equity drivers. In terms of the effects of customer equity drivers on customer satisfaction and re-purchase intention, all customer equity drivers significantly influenced customer satisfaction, while brand equity significantly influenced re-purchase intention. Also, customer satisfaction significantly affected re-purchase intention. In the effective relationship between customer equity drivers and CLV, brand equity causes a significant influence on CLV amongst the customer equity drivers. There were significant differences among groups following the multi-channel shopping orientation of consumers. This study is significant for its scientific focus on the distribution channels of Dongdaemun, and in terms of the practical aspect of identifying the multi-channel attributes considered to be important to consumers. Measuring customer equity will suggest implications about the long-term direction of the development of Dongdaemun-based fashion brands.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 정기총회 및 동계학술연구발표회
• /
• pp.65-66
• /
• 2009

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.1-11
• /
• 2004

A FinFET, a novel double-gate device structure is capable of scaling well into the nanoelectronics regime. High-performance CMOS FinFETs , fully depleted silicon-on-insulator (FDSOI) devices have been demonstrated down to 15 nm gate length and are relatively simple to fabricate, which can be scaled to gate length below 10 nm. In this paper, some of the key elements of these technologies are described including sub-lithographic pattering technology, raised source/drain for low series resistance, gate work-function engineering for threshold voltage adjustment as well as metal gate technology, channel roughness on carrier mobility, crystal orientation effect, reliability issues, process variation effects, and device scaling limit.

• 한국측량학회지
• /
• 제15권1호
• /
• pp.41-50
• /
• 1997

본 연구에서는 실시간에 걸쳐서, 자동적으로 공액점들을 매칭시킬 수 있는 색상분리기법을 제시하는데 목적을 두고 있다 CCD카메라에의해 취득된 영상으로부터 계산된 상좌표는 취득된 상좌표의 정확도 와 소트를 통한 매칭의 정확도 측면에서 점검되었다. 점검결과, 연구에의하여 취득된 상좌표를 이용하여 사진측량 프로그램에 의해 계산된 대상물좌표의 RMSE는 근거리사진측량의 기대RMSE내에 분포하고 있었으며, 소트에의한 공액표정점들의 매칭 또한 정확하게 수행되었다. 따라서 본 연구에서 제시하는 색상분리기법이 정확한 상좌표의 취득과 공액점의 매칭에 적절함을 알 수 있었으며, 이 방법은 실시간에 걸쳐서 취득정보를 빠르고 정확하게 처리해야하는 산업분야에 유용할 것으로 생각된다.

• 소성∙가공
• /
• 제15권2호
• /
• pp.105-111
• /
• 2006

A study was made to investigate the microstructure and the mechanical properties of low-carbon steel, Al-Mg alloy and Ti-6Al-4V alloy each representing bcc, fcc and hcp crystal structures, respectively fabricated by equal-channel angular(ECA) pressing. After a series of ECA pressings was performed, most grains were significantly refined below ${\mu}m$ in diameter with high mis-orientation of grain boundaries irrespective of different crystal structure used. Regarding the strain hardening capability, tensile tests of ultrafine grain (UFG) dual-phase (ferrite/martensite) steel which was different from UFG ferrite-pearlite steel were carried out at ambient temperature, and corresponding mechanical properties were discussed in relation to modified C-J analysis. Low-temperature and/or high strain-rate superplasticity of the UFG Al-Mg alloy and UFG Ti-6Al-4V alloy were also studied. Based on the analysis used in this study, it was concluded that UFG alloys exhibited the enhanced mechanical properties as compared to coarse-grained (CG) counterparts.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.146-154
• /
• 2010

알루미늄 5052 합금의 탄성특성에 대한 ECAP 강소성변형과 어닐링효과를 연구하였다. 알루미늄 5052 합금은 용체화 처리 후 ECAP 가공하고 어닐링처리를 수행하였다. 탄성계수는 기존의 인장시험과 나노압입시험을 통해 측정하고 음향현미경의 음향재료신호를 이용하여 시료의 표변에서 탄성계수를 측정하였다. 기존의 시험법으로는 불가능한 소성변형과 열처리에 따른 탄성계수의 변화를 음향재료신호를 이용하여 성공적으로 측정하였고 개개의 결정립에서도 결정방위에 의존하는 탄성계수를 얻었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.329-329
• /
• 2012

Mobile 기기로 둘러싸여있는 현대의 환경에서 Flash memory에 대한 중요성은 날로 더해가고 있다. Flash memory의 가격 경쟁력 강화와 사용되는 기기의 소형화를 위해 flash memory의 비례축소가 중요한 문제로 부각되고 있다. 그러나 다결정 실리콘을 플로팅 게이트로 이용하는planar flash memory 소자의 경우 비례 축소 시 short channel effect 와 leakage current, subthreshold swing의 증가로 인한 성능저하와 같은 문제들로 인해 한계에 다다르고 있다. 이를 해결하기 위해 CTF 메모리 소자, nanowire FET, FinFET과 같은 새로운 구조를 가지는 메모리소자에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 22 nm 게이트 크기의 FinFET 구조를 가지는 플래시 메모리소자에서 fin의 두께와 높이의 변화에 따른 메모리 소자의 전기적 특성을 3-dimensional 구조에서 technology computer aided design ( TCAD ) tool을 이용하여 시뮬레이션 하였다. 본 연구에서는 3D FinFET 구조를 가진 플래시 메모리에 대한 시뮬레이션 하였다. FinFET 구조에서 채널영역은 planar 구조와 다르게 표면층이 multi-orientation을 가지므로 본 계산에서는 multi-orientation Lombardi mobility model을 이용하여 계산하였다. 계산에 사용된 FinFET flash memory 구조는 substrate의 도핑농도는 $1{\times}10^{18}$로 하였으며 source, drain, gate의 도핑농도는 $1{\times}10^{20}$으로 설정하여 계산하였다. Fin 높이는 28 nm로 고정한 상태에서 fin의 두께는 12 nm부터 28nm까지 6단계로 나누어서 각 구조에 대한 프로그램 특성과 전기적 특성을 관찰 하였다. 계산결과 FinFET 구조의 fin 두께가 두꺼워 질수록 채널형성이 늦어져 threshold voltage 값이 커지게 되고 subthreshold swing 값 또한 증가하여 전기적 특성이 나빠짐을 확인하였다. 각 구조에서의 전기장과 전기적 위치에너지의 분포가 fin의 두께에 따라 달라지므로써 이로 인해 프로그램 특성과 전기적 특성이 변화함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2457-2460
• /
• 2003

There is a great demand to manipulate biological cell autonomously since biologist should spend much time to obtain skillful manipulation techniques. For this purpose, we propose a cell chip to control, carry, fix and locate the cell. In this paper, we focus on the cell rotator to rotate individual biological cell based on a micro fluidics technology. The cell rotator consists of injection hole and rotation well to rotate a biological cell properly. Under the variation of flow rate in injection hole, the angular velocity of a biological cell is evaluated to find the feasibility of the proposed rotation method. As a practical experiment, Zebrafish egg is employed. Based on this research, we find the possibility of non-contact rotation way that can highly reduce the damage of the biological cell during manipulation. To realize an autonomous biological cell manipulation, a cell chip with manipulation well and micro channel in this research will be utilized effectively in near future.

• 한국농공학회논문집
• /
• 제47권2호
• /
• pp.15-21
• /
• 2005

This study is to trace the change of stream shape using the past series of aerial photographs, and to compare the land use changes of riparian area along the stream. For the Gyeongan national stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho-photographs were made with interior orientation and exterior orientation, respectively. Apparent changes of the stream were found that the consolidated reaches of stream by levee construction became straight together with widening of their stream widths. Especially the stream width of inlet part of Paldang lake widened almost twice because of the rise of water level by dam construction in 1974. The land use of riparian areas of three selected years were classified into six categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing method. The forest and agricultural lands decreased and urban area increased as the stream maintenance had been performed.