• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1229-1242
• /
• 2017

In this paper, an interference aware distributed multi-channel MAC (IDMMAC) protocol is proposed for wireless sensor and actor networks (WSANs). The WSAN consists of a huge number of sensors and ample amount of actors. Hence, in the IDMMAC protocol a lightweight channel selection mechanism is proposed to enhance the sensor's lifetime. The IDMMAC protocol divides the beacon interval into two phases (i.e., the ad-hoc traffic indication message (ATIM) window phase and data transmission phase). When a sensor wants to transmit event information to the actor, it negotiates the maximum packet reception ratio (PRR) and the capacity channel in the ATIM window with its 1-hop sensors. The channel negotiation takes place via a control channel. To improve the packet delivery ratio of the IDMMAC protocol, each actor selects a backup cluster head (BCH) from its cluster members. The BCH is elected based on its residual energy and node degree. The BCH selection phase takes place whenever an actor wants to perform actions in the event area or it leaves the cluster to help a neighbor actor. Furthermore, an interference and throughput aware multi-channel MAC protocol is also proposed for actor-actor coordination. An actor selects a minimum interference and maximum throughput channel among the available channels to communicate with the destination actor. The performance of the proposed IDMMAC protocol is analyzed using standard network parameters, such as packet delivery ratio, end-to-end delay, and energy dissipation, in the network. The obtained simulation results indicate that the IDMMAC protocol performs well compared to the existing MAC protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.6
• /
• pp.729-743
• /
• 1989

A spread spectrum(ss) communication system has a lot of advantage, such as realzation of asynchronous code division multiplexing(CDM), robutness to narrow-band interference, impulse noise, privacy function, and so on. We have considered utilization of these advantage to develop a local area network(LAN) using such a transmission channel as power-line. In a power-line, however, restricted bandwidth under the law makes it difficult to carry out CDM, and in a radio channel the sysstem has a near-far problem. These problems originate in co-channel interference, which is due to cross-correlation among pseudo-noise sequences of every channel in CDM. In this paper, we propose a new scheme of easily cancelling co-channel interference and investigate its performance by constructing a LAN using SS technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3589-3605
• /
• 2018

In this paper, we investigate an individual channel estimation problem for multiple-input multiple-output (MIMO) two-way amplify-and-forward (AF) relay networks. To avoid self-interference during the estimation of the individual MIMO channels, a novel blind interference cancellation (BIC) approach is proposed based on an orthogonal preceding framework, where a pair of orthogonal precoding matrices is utilized at the source nodes. By designing an optimal decoding scheme, we propose to decompose the bidirectional transmission into a pair of unidirectional transmissions. Unlike most existing approaches, we make the practical assumption that the nonreciprocal MIMO channel and the mutual interference of multiple antennas are both taken into consideration. Under the precoding framework, we employ an orthogonal superimposed training strategy to obtain the individual MIMO channels. However, the AF strategy causes the noise at the terminal to be the sum of the local noise and the relay-propagated noise. To remove the relay-propagated noise during the estimation of the second-hop channel, a partial noise-nulling method is designed. We also derive a closed-form expression for the total mean square error (MSE) of the MIMO channel from which we compute the optimal power allocation. The simulation results demonstrate that the analytical and simulated curves match fully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.66-74
• /
• 2007

Cognitive Radio system can guarantee available channel whenever, wherever by sensing surrounding channel condition. Therefore, there is a strict rule that have to use allocated channel efficiently without any interference from incumbent User. In this paper, to avoid interference which can occur during uplink transmission in CR system, we propose reporter using scheme which informs incumbent user's situation to adjacent cell to limit channel usage. Therefore, we can use more channel in each cell without interference. With this scheme we can expect better throughput using more channel in a large space with same resource.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.609-610
• /
• 2017

Cognitive radio communication techniques have been attracting attention to efficiently use the scarce spectrum as the wireless communication service increases. In cognitive radio communication, efforts to minimize interference to the primary user are important technical factors. In a multi-hop wireless ad hoc network, multi-hop transmission requires path and channel selection considering channel interference as well as collision with primary users. In the multi-channel environment, cognitive radio network has different capacities depending on the inter-channel interference and collision with the main users. In this paper, we propose a multi-hop transmission scheme that minimizes inter-channel interference and reduce collision with primary users.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.101-104
• /
• 2001

In TD-CDMA system, multi-user interference degrades the system performance. In this paper, we propose a effective multi-user detection algorithm applicable to TDD mode. We certify a channel estimation capacity by using midamble and performance of the proposed multistage interference canceller in the system complex aspect. In computer simulations, it is verified that proposed algorithm has lower complexity and better performance than conventional multi-user interference cancellation in Rayleigh fading channel.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.248-256
• /
• 2015

In this paper, we model the interference plus noise signal for terrestrial cloud transmission systems and present bit error rate (BER) performances. Since terrestrial cloud transmission systems experience co-channel interference from one or more transmitters, they have to operate under a negative signal-to-interference plus noise ratio (SINR) region. The interference plus noise signal can be modeled as Gaussian random variable under the required SINR region and we observe the BER performance of the cloud transmission system using the derived model. Also, we propose an improved channel estimation scheme by averaging the channel estimates based on least square based interpolation scheme. Simulation results show that the cloud transmission system can operate under negative SINR region using the proposed channel estimation scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.465-470
• /
• 2007

The co-channel interference is a primary factor of loss in multimedia mobile communications. In this paper, we present a performance of the frequency reuse partitioning to refrain the co-channel interference and maximize system performance. First, we analyze the co-channel interference using the frequency reuse partitioning through the statistical modeling. From this results, we decide on the frequency reuse partitioning for the system throughput which is maximized. Finally, analysis and simulation results show that the frequency reuse partitioning based cellular system can mitigate the co-channel interference and maximize the system throughput. The experimental results show that system throughput is maximized from 0.7 to 0.8 according to traffic road. We can maximize the system throughput using the results with cellular system design parameter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.129-139
• /
• 1989

During a signal is being transmitted, an interference signal can be introduced through an unknown channel. In these cases, an adaptive system, so called adaptive noise canceller, can restore the original signal from the corrupted signal by first identifying the unknown interference channel on the minimum mean square error criteron, and then by cancelling the interference signal using the identified interference channel. Whereas this method is quite effective when the a priori knowledges about the characteristics of the interference signal and of the intrference channel are unknown or time-varyng, but has a drawback that the presence of the original signal has a severe effect on the optimum value of the interference channel to be identified on the miniumum mean square eror criterion In this paper an adaptive noise canceller and its algorithms are introduced that can restore the original signal more accurately especially when the correlatedness between the original signal and the interference signal is small.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.