• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.878-885
• /
• 2011

Due to reflect at surface of the water and limit bandwidth, it is difficult to design underwater acoustic communication systems with high-reliability and high transmission rate. Therefore the trends of underwater communication is transformed from single sensor to multiple sensor studies. However, underwater MIMO communication techniques have a high correlation value between multiple sensors on transmitters and receivers in underwater environments, it is difficult to expect space diversity gain on muli-path channels. Therefore, this paper proposed the MISO communications system with two transmit sensors and single receiver sensor, and analyzed its performance using the LDPC codes and channel compensation algorithm.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.94-102
• /
• 1999

This paper is related with the compensation of communication channel characteristics using predistorter, and the considered characteristic is the additive noise, phase rotation and frequency selective fading which occurred in communication channel. Predistorter can minimize the effect of obstacle element which occured in channel at receiving side by transmitting the predistortion of signal after modulation, the coefficient of inverse electrical charateristic of communication channel is performed at transmitting side. For this purpose, the predistorter is designed by using Tricepstrum Equalization Algorithm which is adaptive equlizer algorithm, and the receiving side must transmit the probing signal to transmitting side. Using the probing signal, the transmitting side can obtain the inverse characteristic coefficient of communication channel, and this probing signal must be transmitted periodically. We assumed that the channel characteristic do not change during this one period. As a result of computer simulation, we confirmed that the performance of predistorter was fairly good as same as the adaptive equalizer, and this technique have a effectiveness that can be used in the forward channel of mobile communication in order to achieve high speed transmission.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.28-35
• /
• 2009

We investigate the adaptive channel attenuation compensation of satellite OFDMA downlink users for minimum PAR (Peak to Average power Ratio), which is one of the main challenging issues in satellite OFDMA application. First, we analyze and compare PAR performances of two main different channel attenuation compensation schemes for OFDMA, i.e., PC-OFDMA (power control OFDMA) and AMC-OFDMA (Adaptive Modulation and Coding). While AMC-OFDMA maintains the constant transmission powers through entire user data subcarriers, PC-OFDMA has non-uniform subcarrier transmission powers because subcarrier powers are separately controlled to compensate each user's sub-channel attenuation. We newly found the fact that non-uniform subcarrier power in PC-OFDMA achieves rather reduced PAR compared to AMC-OFDMA and the amount of reduction becomes larger as the power differences among subcarriers increase. Also, there is an additional PAR reduction in PC-OFDMA by optimizing subcarrier grouping scheme for user's sub-channelization.

• MALSORI
• /
• no.45
• /
• pp.93-105
• /
• 2003

In this paper, we present a single framework based on GMM for speaker recognition. The proposed framework can simultaneously minimize environmental variations on mismatched conditions and adapt the bias free and speaker-dependent characteristics of claimant utterances to the background GMM to create a speaker model. We compare the closed-set speaker identification for conventional method and the proposed method both on TIMIT and NTIMIT. In the several sets of experiments we show the improved recognition rates on a simulated channel and a telephone channel condition by 7.2% and 27.4% respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.740-749
• /
• 2015

In the visible light (VL) communication based on the conventional LED lights, depending on the increase of the communication range, the signal received at the photodiode of the VL receiver has usually the random distorted and decreased amplitude due to the path loss and fading effects of the VL channel. In order to overcome this problem, we propose, design, and implement the visible light communication circuit based on the comparator threshold voltage, where has a built-in distance compensation function. In addition, the performance of the proposed technique is evaluated and analyzed depending on the distance and communication speed through comparing the proposed VLC system based on the threshold voltage with the conventional one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.542-549
• /
• 2005

In this paper, the optimal pump light power of optical phase conjugator (OPC) and the compensation characteristics of distorted WDM channel signals are numerically investigated, when the OPC with highly-nonlinear dispersion shifted fiber (HNL-DSF) not be placed at the mid-way of total transmission length. The total dispersion of former half section and latter half section is assumed to be same each other in this approach. It is confirmed that, in WDM transmission systems with OPC deviated from the mid-way, the pump light power for best compensation must be flexible selected depending on the OPC position. This optimal pump light power is gradually increased as the OPC is gradually closer to the receiver. Consequently, it is possible to establish the compensation system independent on the OPC position by setting optimal pump light power connected with the OPC position.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.594-600
• /
• 2014

A threshold voltage compensation pixel circuit was developed for active-matrix organic light emitting diodes (AMOLEDs) using amorphous indium-gallium-zinc-oxide thin-film transistors (a-IGZO-TFTs). Oxide TFTs are n-channel TFTs; therefore, we developed a circuit for the n-channel TFT characteristics. The proposed pixel circuit was verified and proved by circuit analysis and circuit simulations. The proposed circuit was able to compensate for the threshold voltage variations of the drive TFT in AMOLEDs. The error rate of the OLED current for a threshold voltage change of 3 V was as low as 1.5%.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.335-337
• /
• 2008

In this paper, an X-Y channel dimming light emitting diode (LED) backlight with temperature compensation for in LCD TVs is proposed. It shows local dimming effects such as reduced power consumption and high dynamic contrast ratio even with much less number of LED drivers than that of the conventional two-dimensional local dimming method. Moreover, the image distortion caused by temperature variation of LED block can be effectively compensated. The validity of the proposed dimming method is verified by simulation and experimental results based on a RGB-LED backlight of a 32-inch LCD TV.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.183-189
• /
• 2005

In precision instrumentation system, an A/D conversion of signal conditioning has some problems.; offset and drift errors with environmental situation. This paper suggested a development of the Multi-Channel A/D Data Acquisition System and a method of the evaluation and the temperature compensation for the A/D converters with the specific analog and digital circuit including the software. Also, we have designed a hardware and a software filters with smart algorithm for better signal processing of the proposed system. Software approach was adopted to obtain the stable data from A/D converter. As shown in our experimental works, the proposed system is expected to be used in the industrial field where a high precision measurement is required.