• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.17-20
• /
• 2000

This paper addresses a novel algorithm for variable rate channel coding with interleaver punctured convolutional code for wireless communication. In other to increase the coding performance and achieve the variable channel coding rate, serially concatenated convolutional coding scheme will be applied. In this paper, we characterize the effect of interleaver puncturing on the effectiveness of the proposed scheme some simulation results are presented, in which the channel model of additive Gaussian noise is assumed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.32-37
• /
• 2011

Underwater communication is affected by reverberation and noise characteristics of the underwater channel and time delay takes place by multipath. Hence, Signal is distorted and a lot of error is generated in the transmitting/receiving by multipath effects, so a channel coding for error correction is required. We propose a channel coding algorithm which is possible to correct error of received signal. We compare and analyze BER(bit error rate) performance depending on the depth of each transmitter-receiver using channel coding algorithm. QPSK was used as a modulation method, and 1/2 code rate convolution coding was used as a coding rate. A convolution coding method shows increase of BER performances.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.484-490
• /
• 1990

In speech coding scheme, because information bits have different error sensitivities over channel errors, the channel coder for combining with speech coding should be realized by the variable coding rate considering the bit importance of speech information bits. In realizing the 4 kbps channel coder for 12kbps speech, this paper have chosen the channel coding method by analyzing the hard-decision post-decoding error rate of RCPC(Rate Compatible Punctured Convolutional) codes and bit error sensitivity of 12 kbps speech. Under the coherent QPSK and Rayleigh fading channel, the performance analysis has showed that 10dB gain was obtained in speech SEGSNR by 4-level uneuqal error protection, which was compared with the caseof no channel coding at 7dB channel SNR.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.163-171
• /
• 2003

In this paper, we develop an approach toward Joint Source-Channel Coding for MPEG-4(Moving picture Experts Group) based video coding In fixed and mobile reception environment. We have considered channel environment of AWGN and mobile reception. The source coder used MPEG-4 video. the channel coder used RCPC(Rate Compatible Punctured Convolution) and the modulation method used QPSK(Quadrature Phase Shift Keying) modulation. This study determined optimum Trade-off point between source bit rate and channel coding rate In variable channel states. We compared Joint Source/channel Coding method and general constant bit rate transmission. In this results, Joint Source/channel Coding was appeared better performance than constant bit rate transmission.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.19-22
• /
• 1998

In this study, the efficient channel coding method combined with CS-ACELP is proposed. The same convolutional coder and Viterbi decoder of COMA mobile communication system is used as channel coder. To make the best available use of limited channel coding redundancy, unequal error protection of punctured convolutional coder is used for variable reate allocation. But, the overall code rate is given by 2. The performance of proposed coder is analyzed and simulated in a Rayleigh fading channel. Experimental results show that the objective and subjective speech quality of variable rate channel coding methods are superior to those of non-variable channel coding method.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.65-66
• /
• 2005

This paper presents an adaptive satellite communication systems to adapt channel environment. High performance coding and modulation techniques are applied to poor channel condition, otherwise, bandwidth efficient coding and modulation techniques are applied to good channel condition to obtain high transmission rate.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.88-96
• /
• 2010

We propose the efficient channel coding method combined with a 2.4kbps speech coder. The code rate of a channel coder is given by 1/2 and 1/2 rate convolutional coder is obtained from the punctured convolutional coder with rate of 1/3. The punctured convolutional coder is used for a variable rate allocation. The puncturing method according to the importance of the output data of the source encoder is applied for the convolutional coder. The importance of output data is analyzed by evaluating the bit error sensitivity of speech parameter bits. The performance of proposed coder is analyzed and simulated in Rayleigh fading channel and AWGN channel. The experimental results with 2.4kbps EHSX coder show that the variable rate channel coding method is superior to non-variable channel coding method from the subjective speech quality.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.303-309
• /
• 2016

This paper presents a channel-adaptive rate control algorithm for low delay video coding. The main goal of the proposed method is to adaptively use the unknown available channel bandwidth while reducing the end-to-end delay between encoder and decoder. The key idea of the proposed algorithm is for the status of the encoder buffer to indirectly reflect the mismatch between the available channel bandwidth and the generated bitrate. Hence, the proposed method fully utilizes the unknown available channel bandwidth by monitoring the encoder buffer status. Simulation results show that although the target bitrate mismatches the available channel bandwidth, the encoder efficiently adapts the given available bandwidth to improve the peak signal-to-noise ratio.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.97-105
• /
• 1994

Transform image coding using DCT is proved to be efficient in the absence of channel error but its performance degrades rapidly over noisy channel. In this paper, in the case of appling bit selcetive error correction coding that protects some significant bits in a codeword, an efficient allocation method of imformation bits and additive redundancy bits used for quantization and error correction coding respectively under constant transmission bit rate is proposed, and its performance is analyzed. As a result, without increasing trasmission bit rate, PSNR can be improved up to 7~8 [dB] below bit error rate $10^2$ and the image without blocking effect caused by bit error resulted from channel noise can be recostructed.