• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.63-89
• /
• 2006

Recently, the technology is getting to be the most important factor for companies, as the industry is changing fast. The uncertainty and complexity of technology valuation arc higher so that the technology concentrated companies need more developed and high performance technology. This paper reviews the methods of technology valuation for five categories that have been developed by valuation researchers, (1) research of technology diffusion and acceptance model, (2) research of technology valuation, (3) research of technology import and export factor, (4) research of technology valuation model, (5) research of technology transfer and market. And we propose a new technology valuation model using need(market), seed(technology) and deeds(management) factor by cross impact matrix. This model gives us the reference negotiation range for deciding the amount of royalty. I hope this paper induces more research on this field of technology valuation.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.5-12
• /
• 1992

Disc specimen with the center crack and edge crack simulated by two-dimensional static method is used to analyze the stress field around the crack tip in terms of the stress intensity factor, K. A simple and convenient method of testing to realize the mifed mode stress intensity factor of the cracked body is used, The conclusions obtatined in this photoelastlc analysis are as follows ; 1. According to this experiment, cracked disc specimen can be used to demonstrate the mixed mode stress intensity factor analysis by simply changing the crack angle from the loading line. 2. Despite the simplicity and continuous data reading, the photoelastic method shows the slightly lower strain reading comparing to the FEM analysis method. 3. In this photoelastic analysis, $K_{I}$ of center cracked disc specimen under a pair of compressive load shows negative value as the crack angle increases over 30$^{\circ}$.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.63-69
• /
• 2005

For the case that center crack is surrounded by four small cracks which are symmetrically distributed around center crack, the same values of normalized stress intensity factor of center crack according to the position of the tip of small cracks are located on the smooth curve. And the stress intensity factor according to any position of small cracks can be sufficiently obtained from this curve. The plastic zones between distributed cracks are also investigated by changing the positions of nearly small cracks. The occurrence of plastic zone due to the interaction between center crack and small cracks are analyzed by finite element method. The mechanical behavior at the vicinity of crack tips is investigated by plastic areas. The changes of plastic zones according to positions of distributed cracks are drawn schematically. The safety of materials is also analyzed.

• 센서학회지
• /
• 제29권3호
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.846-853
• /
• 2008

Maglev System is expected to be a new public transportation for future because of its special characteristics. Sleepers of railway role on transferring the lateral load to guideway for Maglev and controlling the distance between rails. Variation of distance of sleepers can affect dynamic responses for maglev guideway. In this paper, Daejon maglev guideway is analyzed to find proper tie spacing of a maglev system. The analysis included using a maglev trainload and also the dead load as the primary forces on bridges. Not only the dynamic behavior of bridges is investigated under sleeper conditions, but also impact factor about vertical displacement on the guideway is produced. This guideway is analyzed in four cases followed by changing spacing of sleeper and then obtained dynamic characteristics such as displacements, acceleration and impact factor by Finite Element Analysis.

• 센서학회지
• /
• 제30권4호
• /
• pp.196-203
• /
• 2021

In this study, an optical identification system was developed, wherein visible light is used to transmit the interrogating signal, and infrared is used to send the response signal. In the reader, visible light from a light emitting diode (LED) array was modulated via modified pulse width modulation for flicker-free illumination and dimming control. Moreover, the duty factor of the dimming control time was employed to control the illumination from the LED. In the transponder, the spike signal in the output of the high-pass filter was utilized to recover the interrogating signal while preventing interference from the 120-Hz noise from adjacent lighting lamps. The illumination was controlled in 26-86% range of the constant wave LED illumination by changing the duty factor from 20% to 90%. This configuration is advantageous for the construction of optical identification systems for automatic security check and car fare calculation at toll gates or parking facilities.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2331-2338
• /
• 1994

Experimental conditions of the optical shadow methods of caustics for measurement of the stress intensity factor and the J-integral in various materials(polycarbonate, PMMA, Al 5586D) are investigated. The necessary experimental requirements toe determine accurate values of the stress intensity factors and the J-integrals are described. The ratio of $r_o$ (radius of initial curve) to $r_p$ (plastic zone size) is selected as a parameter to verify the experimental limitation of the method of caustics in determination of fracture parameters. In this study, transmission caustics method was used for compact tension specimens made of polycarbonate and PMMA. while reflection caustics method was applied to c-shaped tension specimen made of Al 5586D. The appropriate ranges of $r_o/r_p$ tp determine accurate values of stress intensity factors were found to be 1.5~1.8. Existing experimental results have been obtained mainly by changing $r_p$ with different loads in $r_o/r_p$. However, in this study we could obtain varying $K_{caus}/K_{th}$ over the wide range of $r_o/r_p$ at fixed load conditions with newly designed optical arrangement. Thus, we could find the range in which theoretical and experimental results agree well each other by changing $r_o$ values only. In Al 5586D specimen, experimental caustics were located inside of the plastic zone, and $K_{caus}/K_{th}$ were found to be not unity in this range. It is found that $J_{caus}/J_{th}=1{\;}with{\;}r_o/t{\geq}0.8$ and the experimental plastic zone includes the contours of caustics.

• 한국의상디자인학회지
• /
• 제14권3호
• /
• pp.11-22
• /
• 2012

As the consuming pattern is changing with the expansion of Internet use and the development of communication technology, Internet shopping market is getting bigger and bigger. By product group, clothing and fashion related products occupy the biggest share. Accordingly, in this study it was tried to identify the effects of Internet utilization capability that enables consumers to search for the information that they need in this information flood, variety pursuit trend and product review accommodation status on shopping value, and to analyze the effects of the shopping value on the purchase behavior in online shopping malls. When factor analysis is nude on Internet use level, it was found that Factor 1 was 'Flow Experience,' Factor 2 'Internet Use Capability,' and Factor 3 'Internet Challenge Desire.' When factor analysis is made on Diversity Pursuit Propensity, it was found that Factor 1 was 'Site Diversity Pursuit Propensity,' Factor 2 'Brand Diversity Pursuit Propensity,' and Factor 3 'Brand Value Pursuit Propensity.' When factor analysis is nude on Product Review Accommodation Propensity, it was found that Factor 1 was 'Product Information Provision Propensity,' and Factor 2 'Product Information Receiving Propensity.' Except Internet Use Capability and Product Information Provision Propensity, all other factors showed high correlation. The factor influencing the entertainment value most was Internet challenge desire, while that influencing the practical value most was flow experience. When the effects of the entertainment value and the practical value on product purchase were analyzed, it was found that both of entertainment value and the practical value influenced product purchase and the practical value influenced the product purchase more than the entertainment value.

• 대한가정학회지
• /
• 제46권7호
• /
• pp.109-120
• /
• 2008

The purpose of this study was to find out if body image and conspicuous consumption tendency influenced luxury brand buying behaviour. A survey questionnaire was used to collect information from 430 females in their 20's. Collected data were subjected to descriptive analysis, factor analysis, and path analysis. Results showed that body image and conspicuous consumption tendency consisted of five factors. In terms of body image, attitude towards changing appearance, attitude towards changing body figure/weight, and interest in health/appearance had a positive effect on conspicuous consumption tendency, which ultimately influenced luxury brand buying behaviour. In contrast, body cathexis and physical self-concept had a negative effect on conspicuous consumption tendency, which also directly influenced luxury brand buying behaviour.