• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.120-125
• /
• 2002

In the preceding tests using the KSR-III Sub.(I) engines, it was observed that the heat resistant capability of the engines was not enough for the mission. So Sub.(I) Mod. engines were designed and tested. The Sub.(I) Mod. engines have three major design parameters - the arrangement of main injectors, the impinging angle of main injectors and thermal barrier coating. More than twenty experiments were carried on to evaluate engine performance and heat resistance capability with respect to design parameters. In this study, the test results are introduced. Analysing the result of Sub.(I) engine tests, it is found that decreasing the impinging angle, adopting the H-type arrangement(rather than radial type arrangement) and adopting the thermal barrier coating can increase heat resistance capacity substantially. Also, engine performance evaluation is conducted using specific impulse and characteristic velocity parameter. The results show that the performance variation is small(about 5%) and the performance is better in the case of radial arrangement. It is suspected that these phenomena are caused by the change of flame structure atomization mixing characteristic of sprays and the distortion of recirculation zone. Also from the low frequency instability point of view, it is observed that reducing the impinging angle and adopting the H type arrangement can increase the instability characteristics.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.362-369
• /
• 2008

There is developing interest in precision agriculture in Korea, despite the fact that typical Korean fields are less than 1 ha in size. Describing within-field variability in typical Korean production settings is a fundamental first step toward determining the size of management zones and the inter-relationships between limiting factors, for establishment of site-specific management strategies. Measurements of rice (Oriza Sativa L) yield, chlorophyll content, and soil properties were obtained in a small (100-m by 30-m) Korean rice paddy field. Yield data were manually collected on 10-m by 5-m grids (180 samples with 3 samples in each of 60 grid cells) and chlorophyll content was measured using a Minolta SPAD 502 in 2-m by 2-m grids. Soil samples were collected at 275 points to compare results from sampling at different scales. Ten soil properties important for rice production in Korea were determined through laboratory analyses. Variogram analysis and point kriging with and without median polishing were conducted to determine the variability of the measured parameters. Influence of variogram model selection and other parameters on the interpretation of the data was investigated. For many of the data, maximum values were greater than double the minimum values, indicating considerable spatial variability in the small paddy field, and large-scale spatial trends were present. When variograms were fit to the original data, the limits of spatial dependency for rice yield and SP AD reading were 11.5 m and 6.5 m, respectively, and after detrending the limits were reduced to 7.4 m and 3.9 m. The range of spatial dependency for soil properties was variable, with several having ranges as short as 2 m and others having ranges greater than 30 m. Kriged maps of the variables clearly showed the presence of both large-scale (trend) variability and small-scale variability in this small field where it would be reasonable to expect uniformity. These findings indicate the potential for applying the principles and technology of precision agriculture for Korean paddy fields. Additional research is needed to confirm the results with data from other fields and crops.d similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.63-73
• /
• 2015

Purpose - Satisfaction with service is evaluated according to customers' subjective judgment. The expected value of customer service and its evaluations depend on the customers' position. The customer recognizes two different forms of service levels. One is satisfaction and the other is dissatisfaction. Customers who are satisfied want to receive the service in future. However, those dissatisfied try to change the service. The service provider tries to improve the service. There are two different service cycles. One is the successful cycle and the other is the failure cycle. This study aimed to empirically determine the effects of the justice and authenticity of service recovery on customer behavioral intention through an integrated approach to cognitive justice and psychological authenticity. Research design, data, and methodology - Based on a literature review, justice of service recovery was categorized into three types: distributive, procedural, and interactive. Then, authenticity was added to obtain four independent variables, along with recovery satisfaction as a parameter. Behavioral intention, as an outcome variable, was divided into the repurchase intention and positive word-of-mouth. The model and hypotheses were created and measurement items were developed. A questionnaire survey of items concerning the service recovery experience at family restaurants was conducted on college students and residents in Gwangju from September 30 to October 31, 2013. A total of 400 copies of the questionnaire were sent out and 385 were returned. Respondents answered questions about the importance of, and satisfaction with service recovery on a 5-point Likert scale. Excluding 174 copies without service failure experiences and 7 inappropriate copies, 204 copies were analyzed using SPSS 21.0 for Windows and AMOS 20.0 to determine the reliability and validity of measurements. The hypotheses were tested through a goodness-of-fit analysis. Results - First, distributive justice positively affected recovery satisfaction. Second, procedural and interactive justice had no impact. Third, authenticity positively affected recovery satisfaction. Fourth, distributive justice had relatively stronger effects on recovery satisfaction than authenticity. Fifth, recovery satisfaction significantly affected repurchase intention and positive word-of-mouth and it proved effective in mediation. Finally, additional analysis was performed for descriptive statistics of the principal variables by various demographic characteristics and significant differences were found in gender, occupation, and so on. Conclusions - This study has academic significance as the fairness and authenticity of service recovery were investigated to reveal the effects on behavior. The findings could be applied to a wide range of service recovery strategies. However, there are some limitations. First, data was collected only from the residents of Gwangju and most respondents were aged 20-30. Future studies should target a wide range of areas and age groups. Second, because the questionnaire used in this study targets only convenience family restaurants, the results of this study cannot be generalized to all services companies. Future research should be done on a wide range of industries such as hotels, airlines, and hospitals, and perform a comparison between sectors.

• Environmental and Resource Economics Review
• /
• v.25 no.3
• /
• pp.449-470
• /
• 2016

This paper analyzes the effects of nuclear power generation on industrial growth in using the data of 22 manufacturing sectors in 14 nuclear power countries. The hypothesis that the change in the proportion of nuclear power generation in total electricity generation affects industrial value-added and industrial output through industrial electricity price reduction was tested using the dynamic panel data model. First, it was estimated that the increase in nuclear power generation by a 1% leads to a 0.8% reduction in electricity price. The results indicate that when nuclear power generation increased by a 1% point, industrial value-added and output increased by 0.16% and 0.23%,respectively, in the short-run and by 0.51% and 0.85%, respectively, in the long-run. It was also inferred that the effect of nuclear generation on industrial competitiveness working through electricity price reduction rely on institutional settings in the electricity markets. That is, the competitive effect is greater in the countries such as U.K and Japan where electricity price is high and price volatility is large. Meanwhile, in Germany which has pursued phasing out nuclear power, industrial competitiveness is promoted through stable electricity supply.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.29-60
• /
• 2010

The incentive and reasons to publish FIDIC Conditions of Contract for Design, Build and Operate Projects(DBO Form) are manifold. It is partly a response to the increasing need for sophisticated project delivery methods in both the public and private sectors and the already widespread use of the FIDIC Yellow Book with operation and maintenance obligations and partly a response to the challenge to decrease maintenance cost to a minimum by means of a new procurement route. As a result, FIDIC has developed a new model form to meet this market place requirement. On the other hand, FIDIC did not simply adapt the Yellow Book but has developed a new form from it, whilst preserving the style of the already known FIDIC Forms and maintaining the wording where it was not necessary to change it for the purposes of a DBO Form. Moreover DBO Form fills up supposed gaps in other FIDIC Forms and ameliorates the claim management and dispute management framework. FIDIC DBO approach may be shortly summarized as follows. First, DBO Form provides for single project responsibility. Second, DBO Form has the clear objective of ensuring the use of a most reliable and efficient technology at the lowest life-cycle cost. Third, DBO Form is intended to operate as an effective quality increase in the design and construction of projects. Fourth, DBO Form is intended to provide significant benefits with regard to system integration and reduction of risks. Fifth, DBO Form accelerates and enhances completion schedule compliance. Sixth, DBO takes care of all three supporting pillars of sustainability(including economical, environmental and social elements). DBO Form is obviously a good starting point for negotiations and the preparation of calls for tenders, thus saving the parties time and money. However, existing cultural and legal differences, particular local conditions and the particular needs of some branches of the industry may require the form to be adapted according to the particular needs of a project. And Civil law practitioners are strongly recommended to verify carefully the underlying legal concepts and background of each clause of the General Conditions in order to avoid unnecessary and sometimes unnatural changes and amendments being made. Note that when preparing the Particular Conditions ensure that terminology is consistent and that existing inherent concepts should not be ignored.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.63-69
• /
• 2013

Purpose - Ethical consumption is the action of buying one product over another with an ethical idea in mind. It has gained in popularity since the 1990s with more emphasis being put on the power of consumer actions to create social, economic, and environmental change. Ethical consumption involves boycotts of certain products or brands as well as purchases linked to ethical issues. Cause-related marketing (the buying behavior of ethical consumption) involves a for-profit and non-profit entity teaming up to promote a product at the same time as promoting a social cause. Each time a consumer buys that product, a donation is made by the for-profit entity to the non-profit entity supporting the specific cause. Cause-related marketing has become a tremendously popular type of ethical consumption in recent years owing to its reputation of allowing companies to "do well by doing good." This study examines how consumers' perception of cause and attitude influence their attitude toward a cause-related marketing campaign and attempts to suggest implications for marketers. Research design, data, and methodology - First, this study was designed to examine the consumers' perception factors (cause involvement, attitude for cause, attitude for company and brand familiarity) in order to determine whether these factors have significantly affected consumers' attitude toward a cause-related marketing campaign. Second, this study developed a structural equation model and tested it empirically using survey data from 223 individual respondents. Respondents were undergraduate students in Chungnam. They were shown an existing real campaign message of cause-related marketing, and then filled out a questionnaire. Data were analyzed with SPSS 20.0 and AMOS 17.0 programs. Results - The hypotheses were tested using factor analysis and structural equation modeling. The study's results showed that brand familiarity, attitude to the company and attitude to the cause significantly affected consumers' attitude toward the cause-related marketing campaign and performance. In particular, attitude to the cause was significantly related to attitude and performance of the cause-related marketing campaign. However, the hypothesis about cause involvement was not supported with the results indicating that cause involvement did not affect consumers' attitude toward the cause-related marketing campaign. The findings underline the importance of consumer perceptions of the cause and the company and their attitude to the cause. They point to the importance of individual differences that influence consumer perceptions of the cause, the company and brand familiarity. Also of importance is the consumer's attitude to the cause. Conclusions - The findings suggest some practical implications in designing and implementing cause-related marketing campaigns. It is important to enhance brand familiarity and create a favorable attitude to the company and attitude to the cause before designing cause-related marketing campaigns. The rising popularity of cause-related marketing has been attributed to its potential to cut through advertising clutter. The findings in this study suggest that marketing campaigns supporting a cause make a difference.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.35-45
• /
• 2014

Limit equilibrium methods of slope stability analysis have been widely adopted mainly due to their simplicity and applicability. However, the conventional methods may not give reliable and convincing results for various geological conditions such as nonhomogeneous and anisotropic soils. Also, they do not take into account soil slope history nor the initial state of stress, for example excavation or fill placement. In contrast to the limit equilibrium analysis, the analysis of deformation and stress distribution by finite element method can deal with the complex loading sequence and the growth of inelastic zone with time. This paper proposes a technique to determine the critical slip surface as well as to calculate the factor of safety for shallow failure on partially saturated soil slope. Based on the effective stress field in finite element analysis, all stresses are estimated at each Gaussian point of elements. The search strategy for a noncircular critical slip surface along weak points is appropriate for rainfall-induced shallow slope failure. The change of unit weight by seepage force has an effect on the horizontal and vertical displacements on the soil slope. The Drucker-Prager failure criterion was adopted for stress-strain relation to calculate coupling hydraulic and mechanical behavior of the partially saturated soil slope.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.881-891
• /
• 2020

Recently, the Ministry of Land, Infrastructure and Transport and the Ministry of Science and ICT are developing the Land Observation Satellite (CAS-500) to meet increased demand for high-resolution satellite images. Expected image products of CAS-500 includes precision orthoimage, Digital Surface Model (DSM), change detection map, etc. The quality of these products is determined based on the geometric accuracy of satellite images. Therefore, it is important to make precision geometric corrections of CAS-500 images to produce high-quality products. Geometric correction requires the Ground Control Point (GCP), which is usually extracted manually using orthoimages and digital map. This requires a lot of time to acquire GCPs. Therefore, it is necessary to automatically extract GCPs and reduce the time required for GCP extraction and orthoimage generation. To this end, the Precision Image Processing (PIP) System was developed for CAS-500 images to minimize user intervention in GCP extraction. This paper explains the products, processing steps and the function modules and Database of the PIP System. The performance of the System in terms of processing speed, is also presented. It is expected that through the developed System, precise orthoimages can be generated from all CAS-500 images over the Korean peninsula promptly. As future studies, we need to extend the System to handle automated orthoimage generation for overseas regions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1719-1729
• /
• 1994

In this paper, an adaptive CAC(Connection Admission Control) method is proposed. The adaptive CAC uses traffic estimates derived from both traffic parameter specified by user and cell flow measurements. Traffic estimation using user-specified parameters is performed at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. Traffic estimation using cell flow measurement is carried out when the number of connected calls does not change during a measurement reflection period-renewal period. The most import ant thing for the traffic estimation using cell flow measurement is the determination of the length of a renewal period to trace a real traffic flow with an allowable time lag and the measurement reflection ratio(MRR) both to reduce the portion of overestimation and to avoid underestimation of real traffic flow. To solve these problems, the adaptive CAC updates renewal period and MRR adaptively according to the number of connections and the elapsed time after last connection or release respectively. Performance analysis for the proposed method is evaluated in several aspects for the cases of both homogeneous and heterogeneous bursty traffic. Numerical examples show the adaptive CAC method has the better performance compared with conventional CAC method based on burst model from the both utilization and QOS point of view.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2019

To analyze the influence on the stability, resulting from application of upgrade pipe roof structure (UPRS) method to the structure existed under subway Station, physical properties of a ground, elasticity and elasto-plastic theories, including displacement analysis of finite elements, stress analysis of finite elements, displacement caused by steel pipe propulsion and internal excavation, and stress change in a steel pipe, were introduced. Then, the influence on structural stability when applying the UPRS method was compared and reviewed based on the construction management standard of the Ministry Land, Infrastructure and Transport and foreign sources, using numerical analysis with a model which assumes that each microelement divided into a structurally stable point consists of the connection of finite points. As a result of the finite element analysis, 7.21 mm maximum displacement, 1/3,950 angular displacement, 70.28 MPa bending compressive stress of steel pipe structure constructed with UPRS (non-excavation) method and 477.38 MPa maximum shear strength were within their allowable standards (25.00 mm, 1/500, 210.00 MPa and 120.00 MPa, respectively), and therefore, the results showed that the design and construction are stable.