• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.59-63
• /
• 2009

Soybean phosphatidylcholine microparticles loaded with cyclosporin A (CsA) were prepared by the modified emulsion solvent diffusion and ionic gelation method, in which chitosan on the surface of the microparticles was crosslinked with various concentrations of tripolyphosphate (TPP). The morphology of the particles was characterized by scanning electron microscopy (SEM). The change of particle size and zeta-potential by chitosan on the surface of the lipid microparticles were systematically observed. The encapsulation efficiency and loading capacity of CsA in the particles were determined by high performance liquid chromatography (HPLC). In vitro release kinetics was studied using the dialysis method. In the results, the mean particle size and the zeta-potential of lipid microparticles increased when the attached chitosan was cross-linked (from 2.5 to 6.2 ${\mu}m$ and from -37.0 to +93.0 mV, respectively). The cyclosporin A-loaded lipid microparticles appeared discrete and spherical particles with smooth surfaces. The encapsulation efficiency of CsA was between 79% and 90% while the loading capacity was between 41% and 56%. In vitro release study showed that the crosslinkage of chitosan by TPP significantly delayed the release of CsA from the particles in a concentration-dependent manner. Thus, the release of CsA from the lipid microparticles could be controlled by tripolyphosphate used as a cross-linking agent.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.200-206
• /
• 2014

To determine the effects of grape skin and seed pomace (GSP) additions on the lipid oxidation susceptibility and the color change of cooked pork sausages, the chemical characteristics of GSP itself and the addition for two different levels of GSP (0.5 and 1.0% GSP, respectively) to sausages were examined. Both the redness and blueness of the GSP were significantly reduced as the pH level was increased from 5 to 7, but a reverse result was determined in the color tint and yellowness (p<0.05). The GSP polyphenol and flavonoid contents were influenced by the percentages of methanol solvents, and more flavonoids were established when 100% of methanol was applied as a solvent to the GSP. But, similar results were not observed in the polyphenol of GSP. In cooked pork sausages, significant decreases in the lightness and redness were found in both the 0.5% and 1.0% of GSP sausages during the storage period (p<0.05). However, an incompatible effect was observed in terms of yellowness, which increased as compared to the control sausage after 6 days of storage. The 0.5% addition of GSP decreased the levels of TBARS (p<0.05), but the ability of GSP to minimize lipid oxidation was not dose dependent. Therefore, the results indicated that the GSP is an efficient suppressor of lipid oxidation and has latent effects as a natural antioxidant when 0.5% of GSP is added to the cooked pork sausages.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.386-397
• /
• 1995

A cross sectional study was performed to evaluate the neurobehavioral effects of chronic exposure of complex organic solvents, using NCTB(Neurobehavioral Core Test Battery) recommended by WHO(World Health Organization). Forty female shoe factory workers and twenty-two controls matched with age were participated. The tests were performed in the morning before start of work, to exclude the effects of acute exposure. Workers were exposed mainly to toluene, methyl ethyl ketone, n-hexane, cyclo-hexane, dichloroethylene, trichloroethylene, benzene, xylenes etc. The ranges of present solvent exposure of hygienic effect were $0.46\sim0.71$ in the process using adhesives indirectly, and $1.83\sim2.39$ in the process using it directly. We reclassified the subjects, according to cumulative exposure. It showed significantly poorer performances in high exposed group on Santa Ana Dexterity and Benton Visual Retention, compared with control group. After controlling confounder, the significances were still remained. But, further cohort studies, having the information of personal exposure dose from entering a factory, are required to clarify the effects of chronic exposure of complex organic solvents in relation to dose and duration of exposure.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.109-114
• /
• 2006

Biodegradable poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles were developed for sustained delivery of water-soluble macromolecules. PLGA nanoparticles were fabricated by spontaneous emulsification solvent diffusion method generating negatively charged particles and heterogeneous size distribution. As a model drug, blue dextran was encapsulated in PLGA nanoparticles. In addition, nanoparticles were also prepared with varying ratio of poloxamer 188 (P188) and poloxamer 407 (P407), and coating with poly(vinyl alcohol) (PVA). Then, the particle size, zeta potential and encapsulation efficiency of nanoparticles containing blue dextran were studied. In vitro release of blue dextran from nanoparticles was also investigated. The surface and morphology of nanoparticles were characterized by scanning electron microscopy (SEM). In case of nanoparticles prepared with PLGA, P407, and different organic solvents, particle size was in the range of $230{\sim}320\;nm$ and zeta potentials of nanoparticles were negative. The SEM images showed that ethyl acetate is suitable for the formulation of PLGA nanoparticles with good appearance. Moreover, ethyl acetate showed higher encapsulation efficiency than other solvents. The addition of P188 to formulation did not affect the particle size of PLGA nanoparticles but altered the release patterns of blue dextran from nanoparticles. However, PVA, as a coating material, altered the particle size with increasing the PVA concentration. The nanoparticles were physically stable in the change of particle size during long-term storage. From the results, the PLGA nanoparticles prepared with various contents of poloxamers and PVA, could modulate the particles size of nanoparticles, in vitro release pattern, and encapsulation of water-soluble macromolecules.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.3
• /
• pp.177-183
• /
• 2004

Recently, studies on intranasal mucosa delivery of influenza vaccine have been actively developed because of lack of pain and ease of administration. We studied on preparation of nanoparticle delivery system using biodegradable polymer as a poly(DL-lactide-co-glycolide) (PLGA) and their binding characteristics with vaccine. Three kinds of PLGA nanoparticles were prepared by spontaneous emulsification solvent diffusion (SESD) method using sodium dodecyl sulfate and sodium laurate as an anionic surfactant and Lutrol F68 (polyethylene glycol-block-polypropylene glycol copolymer) as a nonionic surfactant. The 5-aminofluorescein labeled vaccine was coated on the surface of nanoparticles by ionic complex. The complexes between vaccine and nanoparticles were confirmed by change of the size. After vaccine coating on the surface of anionic nanoparticles, particle size was increased from 174 to 1,040 nm. However the size of nonionic nanoparticles was not more increased than size of anionic nanoparticles. The amount of coated vaccine on the surface of PLGA nanoparticles was $14.32\;{\mu}g/mg$ with sodium dodecyl sulfate, $12.41\;{\mu}g/mg$ with sodium laurate, and $9.47{\mu}g/mg$ with Lutrol F68, respectively. In conclusion, prepared nanoparticles in this study is possible to use as a virus-like nanoparticles and it could be accept in the field of influenza vaccine delivery system.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2003

The imidization and cure reaction of a thermosetting phenylethynyl-terminated amic acid (LaRC PETI-5) in film form have been monitored as a function of temperature by means of a steady-state fluorescence technique using a front-face illumination method. The variation of the fluorescence emission spectra of LaRC PETI-5 can be divided into four temperature regions; Region I: below 15$0^{\circ}C$, Region II: 150-25$0^{\circ}C$, Region III: 250-35$0^{\circ}C$, and Region IV: above 35$0^{\circ}C$. The fluorescence spectra in Region I are largely influenced by residual N-methyl-2pyrrolidinone in the polymer and also slightly by partial imidization of the polymer. There is a combined effect of imidization and solvent removal on the fluorescence behavior in Region II. The spectra in Regions III and IV are due significantly to the cure reaction of LaRC PETI-5 and to a post-cure effect of the polyimide, respectively. This spectroscopic evidence indicating the transformation of the amic acid imide oligomer into the corresponding polyimide via imidization and cure, agrees well with thermal analysis results obtained previously. The intermediate stage of cure in the range of 250-30$0^{\circ}C$ predominantly influences the change of the fluorescence intensity. The later stage above 30$0^{\circ}C$ significantly influences the position of the spectrum. This fluorescence study also supports the mechanism proposed in earlier work that the crosslinking reaction takes place at the reaction sites in the conjugated polyene and the phenylethynyl end group in the polyimide chain.

• Archives of Plastic Surgery
• /
• v.34 no.6
• /
• pp.685-690
• /
• 2007

Purpose: Numerous materials, both autologous and nonautologous, have been used for augmentation of sunken areas and each has its own limitations. The ideal material for augmentation should not be absorbed in any manner. This study is designed to assess the survival of $SureDerm^{(R)}$, $Permacol^{(R)}$ graft according to the volume and histologic change. Methods: Twenty four mice, weighing about 50 grams and of 5 weeks of age were used. $SureDerm^{(R)}$ is an acellular dermal matix obtained from human cadeveric skin. $Permacol^{(R)}$ is a porcine derived acellular dermal matrix whose manufacture involves trypsinisation, solvent extraction. Graft pieces standardized to $1{\times}1cm$ size were used in each group. The implanted material were taken 1, 4, 8 and 12 weeks later, respectively. The changes of graft volume during the graft period were measured on initial, 1, 4, 8 and 12 weeks. Results: The initial shape of graft was maintained up to 12 weeks in $Permacol^{(R)}$ graft group and mean survival rate was $80.36{\pm}8.21%$ in $SureDerm^{(R)}$, $89.57{\pm}6.39%$ in $Permacol^{(R)}$(p=0.01). The volume of each graft decreased 29% from initial volume on 12 weeks in $SureDerm^{(R)}$, 18% in $Permacol^{(R)}$. The structure of $Permacol^{(R)}$ remained until 12 week after implantation. Conclusion: Our experimental study suggests that $Permacol^{(R)}$ could be a safe material as an implant for permanent augmentation. However, There are further study remained for antigenicity of these material, and the choice of graft for augmentation should be remained to the clinical situations.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.2
• /
• pp.99-104
• /
• 2008

PLGA micro/nano particles encapsulating ranitidine as a hydrophilic model drug were prepared by the double-emulsion solvent evaporation method. Surface morphology investigation by scanning electron microscope (SEM) showed that the emulsification by sonication could produce nanoparticles, whereas microparticles were prepared using high speed homogenizer. Moreover, while nanohalf-shell structure instead of spherical nanoparticle could be produced by adding poloxamer into oil phase (MC) with PLGA 504H, the addition of poloxamer didn't change particle shape in case of PLGA 502H. On the other hand, microparticle with poloxamer had more surface pores than those without poloxamer. The size and polydispersity (PDI) of particles were determined by particle size analyzer. Effective diameters of particles were in the range of $400{\sim}800\;nm$ and $1200{\sim}3300\;nm$ in case of nanoparticles and microparticles, respectively. Encapsulation efficiencies were in the range of $1.2{\sim}2.9%$. The addition of poloxamer produced the particles with higher encapsulation efficiency. In vitro release study in phosphate buffer (pH 7.4) at $37^{\circ}C$ showed common large initial burst release. However, the relative slower release profile could be observed in case of microparticles. Poloxamer addition increased the release rate, which was thought to be related to the increased surface area of particles.

• Journal of Adhesion and Interface
• /
• v.6 no.2
• /
• pp.6-12
• /
• 2005

The plasma generally, ionized gas state, is the 4th material state composed the universe. Generating the plasma artificially has been studied by spending energy and it has a lot of applications in human's life. There are several merits to modify the surface of polymer using plasma. Above all, plasma maintains the property of polymer because of it changes the property of surface only. Also, it doesn't use a organic solvent and it is the environment friendship because of there are no waste under processing. Furthemore, in case of high-pressure plasma, it is possible that automated-processing continuously. In this study, we tried the reforming of surface to rise the adhesive strength between the material of polymer, experimented the rising of adhesive strength through a experiment of peel strength by virtue of processing time and using gas, confirmed the change of polymer's surface through measuring the surface contact angle analyzer and scanning electron microscopy (SEM).

• Macromolecular Research
• /
• v.9 no.2
• /
• pp.116-121
• /
• 2001

A series of poly(1,4-phenylenevinylene-alt-3-alkyl-2,5-thienylenevinylene)s (alkyl = hexyl [PPV-alt-6-TV] and octyl (PPV-alt-8-TV] group) have been synthesized by the Heck coupling reaction. These polymers were characterized using $^1$H-NMR, FT-IR spectroscopy, and thermogravimetric analysis (TCA). They are solvent processible and have obviously copolymeric structure. The photophysical properties of the polymers were investigated using UV-visible and steady-state photoluminescence(PL) spectroscopy. We studied the change of light-emitting properties by incorporating the thiophene group into the PPV polymer backbone using alternating copolymer system. The properties of two synthesized polymers are very similar, but they exhibited apparent changes of light-emitting properties compared with other PPV backbone based polymers. The broad absorption bands from 350 to 570 nm are due to $\pi$-$\pi$* transitions of the polyconjugated systems. The absorption maxima of the two polymers were found at about 452 and 448 nm for PPV-alt-6-TV and PPV-alt-8-TV, respectively. The copolymers showed broad PL spectra between 550 and 700 nm without vibronic bands and PL emission maxima of PPV-alt-6-TV and PPV-alt-8-TV are about 620 and 605 nm, respectively. The copolymers exhibited the red emission (PPValt-6-TV), but more red shifted emissions are needed to obtain real red color.