• 한국안광학회지
• /
• 제20권4호
• /
• pp.445-454
• /
• 2015

목적: 본 연구에서는 착용자의 눈물양이 토릭 소프트콘택트렌즈 착용시간 및 응시방향에 따른 축회전 변화에 미치는 영향을 알아보고자 하였다. 방법: 이중쐐기형 축안정화 디자인을 가진 토릭 소프트콘택트렌즈를 62안(정상안 29안, 건성안 33안)에 착용시키고 착용 15분 후 및 6시간 후의 비침입성 눈물막파괴시간 변화와 응시방향을 달리하였을 때의 회전방향과 회전양 변화를 측정하였다. 결과: 토릭 소프트콘택트렌즈를 착용하고 응시방향을 달리하였을 때 대체로 귀 쪽으로 회전하는 경우가 많았으나 착용시간 및 착용안의 눈물양에 따라 차이가 있었다. 또한, 렌즈 착용 15분 후와 6시간 후 모두 거의 모든 응시방향에서 건성안의 경우가 정상안에 비해 귀 쪽으로 회전하는 빈도가 더 높았다. 렌즈 착용 15분 후에는 건성안군의 회전양이 전체적으로 컸으나 6시간 후에는 정상안군과 건성안군 간의 회전양 차이는 크지 않았다. 결론: 본 연구에서는 렌즈 착용자의 눈물양에 따라 토릭 소프트콘택트렌즈의 축 회전이 달라지며, 착용 초기와 일정시간 착용 후의 회전 양상이 상이함을 밝혔다. 본 연구결과를 통한 토릭 소프트콘택트렌즈 회전양상 변화는 착용 시간 경과 후의 시력 변화 가능성을 의미하며 눈물양과의 상관관계 규명은 토릭 소프트콘택트렌즈 선택시 적절한 고려요인이 필요함을 제안한다.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.175-182
• /
• 2011

The purpose of this article is to suggest what is the desirable direction of economic relationship between Korea and China. The economic relationship between countries is based on how the present network is. As the economic relationship between countries grows, the network between countries will expand. In the past, the economic relationship between Korea and China is cooperative one from the viewpoint of international division of labor. Korean industries was focused on the value-added and mid-advanced technology products, while Chinese was focused on the labor-intensive products. As the China's economy grows for more than thirty years, there is a great change in China's economic policies and environment. China's industry structure is moving from the labor-intensive industry to technology-oriented industry. China's exports to the global market is increasing very fast, and China's domestic market is also growing. The change in Chinese industries' structure bring about severe competition in the global market. The expanding China's domestic market is also good opportunity as the new market in the world. The change in China's industrial structure needs for Korea to establish the 'New Network" between two countries. Korea has to grab the new opportunities in the China's domestic market and find new cooperative network with the products and industries.

• 한국의상디자인학회지
• /
• 제15권3호
• /
• pp.33-40
• /
• 2013

This paper focused on investigating the seam strength by cutting direction depending on the fabrics and weave by comparing the tensile strength and elongation of bias, warp and weft of 4 kinds of find cotton fabrics and combining 6 kinds of seam cutting directions. The cutting directions are selected the warp direction, weft direction and 45-degree bias direction. Then, three kinds of directions, the warp/warp direction, the weft/weft direction and the bias/bias directions, and the three different kinds of directions, the warp/weft direction, the warp/bias direction and the weft/bias directions, were finally selected. The results are as follows: The tensile strength of all fabrics was higher in the order of warp, bias and weft direction and tensile elongation was higher in the order of bias, warp and weft direction in almost all fabrics. 100's and 150's cotton fabrics showed the highest seam strength when they were cut in the bias/bias direction. The seam strength of the fabrics cut in the same direction was the highest in the fabrics cut in the bias/bias direction. Four kinds of fabrics demonstrated the similar seam strength. However, for the seam strength of fabrics cut in the different directions, 100's cotton fabrics had the difference of seam strength by direction and weave, but 150's cotton fabrics didn't have any difference in seam strength by direction and weave. As described above, the seam strength was influenced by the cutting direction of fabrics. Accordingly, the seam strength can be improved by changing the cutting direction of seam when making the clothing.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2971-2978
• /
• 2013

최근 배전계통은 정부의 녹색성장 정책으로 태양광, 풍력발전 등과 같은 분산전원의 보급률이 지속적으로 증가되고 있는 실정이다. 이러한 분산전원의 연계로 기존 배전계통의 조류흐름은 단방향(One-direction)에서 양방향(Bi-direction)으로 변화되고, 고장전류의 증 감이 발생하는 등, 다양한 변화가 생겨 배전계통의 운용상에 여러 가지 문제점들이 발생할 가능성이 커지고 있다. 따라서 본 논문에서는 분산전원의 배전계통 연계에 따른 보호기기의 정정 및 양방향 보호협조 검토가 가능한 보호협조 평가알고리즘과 실제의 사고전류 값을 이용한 개선된 T-C곡선 알고리즘을 제안하고, 이 알고리즘을 바탕으로 양방향 보호협조 평가시스템을 개선하였다. 또한 평가시스템을 이용하여 배전계통을 모델링하고, 분산전원 연계 시 보호기기들 간의 보호협조를 검토하여, 분산전원이 연계된 경우 배전계통에 발생할 수 있는 기술적인 문제점들을 분석하여 그 방안을 제시하였다.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.799-815
• /
• 2016

In this study, according to the reference setting based on the runoff video of 9:00 where the highest water level of 3.94 m has been recorded during the runoff of Cheon-mi Stream in Jeju Island by the attack of Typhoon no. 16 Sanba on September $17^{th}$, 2012, the error rate of long-distance and short-distance velocimetry and real-distance change rate by input error have been calculated and the input range value of reference point by stream has been suggested. In the reference setting process, if a long-distance reference point input error occurs, the real-distance change rate of 0.35 m in the x-axis direction and 1.35 m in y-axis direction is incurred by the subtle input error of 2~11 pixels, and if a short-distance reference point input error occurs, the real-distance change rate of 0.02 m in the x-axis direction and 0.81 m in y-axis direction is incurred by the subtle input error of 1~11 pixels. According to the long-distance reference point setting variable, the velocity error rate showed the range of fluctuation of at least 14.36% to at most 76.06%, and when calculating flux, it showed a great range of fluctuation of at least 20.48% to at most 78.81%.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1407-1415
• /
• 2005

Strength change of an over-aged A12024 material was studied after being subjected to stages of severe plastic deformation by ECAP (Equal Channel Angular Pressing). Various kinds of strength value were measured using the conventional tensile test, Rockwell and Vickers hardness and the SP (small punch) test Due to limitation of the specimen size, tension test in transverse direction could not be conducted. Hence, SP test was employed for assessing the strength in transverse direction. Based on TEM observation the measured strength characteristics were explained based on the relation between microstructure, dislocation and strength. As the number of ECAP pass increases, the strength of A12024 was also increased. However, considerable change of strength, which is generally predicted, was not observed in this study. For the strength in transverse direction even decrease of the strength was observed after 6 passes of ECAP. It was argued that this decrease was due to dynamic recovery of dislocation density during or after ECAP processes at $150^{\circ}C$. The strength assessment equation proposed by the authors in the previous paper was shown to be very accurate. This argument was supported by comparing the results of conventional tensile test with those of SP test. It was also pointed that the Rockwell har(3ness value seemed to be able to represent the strength in the transverse direction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.369-372
• /
• 2009

본 연구에서는 플라즈마에 의한 초음속 유동장의 변화를 수치해석을 이용하여 분석하였다. 플라즈마의 방향을 유동에 평행한 방향과 가로지르는 방향 두 가지 경우에 대한 해석을 통하여 플라즈마가 초음속 유동장의 방향과 유동의 속도 변화에 주는 영향을 알아보았다. 해석 결과 전기장의 크기와 공간별 차이에 따라서 유동장의 방향 및 속도 변화가 다르게 나타났다. 전기장의 방향에 따라 전자가 유동장과 같은 방향으로 가속되는 경우 유동의 속도가 증가하였으며, 반대인 경우에는 유동의 속도가 감속 된다는 것을 확인할 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.367-378
• /
• 2020

This paper introduces the development of the iterative multiple signal classification (MUSIC)-based direction-of-arrival (DOA) estimation system using a rotator that can control the direction of antenna for the global navigation satellite system (GNSS) interference. The system calculates the spatial spectrum according to the noise eigenvector of all dimensions to measure the number of signals (NOS). Also, to detect the false peak, the system adjusts the array antenna's direction and checks the change's peak angles. The phase delay and gain correction values for system calibration are calculated in consideration of the chamber's structure and the characteristics of radio waves. The developed system estimated DOAs of interferences located about 1km away. The field test results show that the developed system can estimate the DOA without NOS information and detect the false peak even though the inter-element spacing is longer than the half-wavelength of the interference.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.743-748
• /
• 2006

Ren et al. analyzed the performance of the indirect evaporative cooler according to the direction of the flow considering evaporation water flow and wetness. However the effect of NTU of each channel on the performance of the indirect evaporative cooler according to the direction of the flow was not analyzed exactly. In this study the effect of the direction of the flow on the Indirect evaporative cooling performance changing NTU of each channel are investigated theoretically. The cooling process of the indirect evaporative cooler by flow direction is modeled into a set of linear differential equations and solved to obtain the exact solutions to the temperatures of the hot fluid, the moist air, and evaporation water. Based on the exact solution in the case of different NTU of each channel, we study the change of the distribution of the temperature according to each flow direction and at the same time analyze the effect of the flow direction on the cooling performance.