• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1771-1776
• /
• 2017

Recently, IoT(Internet of Things) has been utilized in various fields provide a service to users by configuring a smart environment in a particular place. However, since the existing system does not change the operation and the task of the device according to the change of the surrounding environment, the user must operate passively every time the environment and the situation change. In this paper, we propose Situation-specific Task Control System based on real-time data classification. Sensor data is sent to the server and classified into real-time and non-real-time data, and then inserted into the decision tree to identify tasks according to the situation. In addition, the danger situation is divided into two stages, such as gas leakage and fire, and a warning message is sent. Therefore, it is possible to reduce the waste of electric power and the occurrence of malfunction, and it can be expected that the service with increased work efficiency will be provided.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.37-45
• /
• 2013

Objective: This study describes the change of operator performance in drastic change of illumination level, and proposes an alternative method to cope with it. Background: The control standard of illumination for nuclear power plants(NPPs) is based on the set of limit criteria for maintaining a specific illumination level. However, there is a possibility to cause human errors according to the psychological and physiological influences to operators in the situation of drastic change of illumination such as SBO(Station Black Out), so a basic study is necessary to review the current approach. Method: We assessed the visual fatigue, subjective work load and task performance according to the three illumination situations(Normal Illumination, Emergency Illumination, and Drastic Change of Illumination). Result: Research finding shows that there are not significant differences in task performance between normal illumination (1,000lx level) and emergency illumination (100lx level), only if beyond the dark adaptation limit. However, subjective work load on mental demand and visual fatigue show a potential challenge to visual performance in drastic change of illumination. Conclusion/Application: Several trials can complement this challenge in NPPs by applying 3-way communication, enhancing readability of procedures, and managing the visual factors affecting the operators' performance through a Visual Environment Management Program including visual health aspects, etc.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.383-388
• /
• 2022

This thesis explores the principle of a performer's organic action by means of his/her bodily responses on stage. This research has been developed to define the nature of a performer's central task in order to constitute empirical understanding of acting and the purpose of training in addressing the question of what sort of qualitative bodily training is necessary to be in a state of the full body involvement. This study investigates to articulate a performer's fundamental task at the most rudimentary level by utilizing those theatre artists' concepts with practical assumptions. In particular, the key terms, happen and change signifies the quality of a performer's body that has to fit into the given environment in which the performer's body can be subordinated through the moment on stage. Here, we argue that a performer's essential task parallel to make the following moment to happen and change by means of progressing a set of the next moment. In this manner, we also argue that a moment of displaying the performer's conscious effort, forceful and externalizing the visible elements under the use of erroneous language leads his/her body not to function on stage, a state of disengagement from his/her body. Finally, we provide a way to facilitate a performer's organic action by focused on his/her lived experience to create the functional moment which is opposite to the predominance of a representation, maintaining the performer's intellectual sense.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.64-71
• /
• 2022

Various types of attendance management systems are being introduced in a remote working environment and research on using face recognition is in progress. To ensure accurate worker's attendance, a face recognition-based attendance management system must analyze every frame of video, but face recognition is a heavy task, the number of the task should be minimized without affecting accuracy. In this paper, we proposed a search model using time interval variation to minimize the number of face recognition task of recorded videos for attendance management system. The proposed model performs face recognition by changing the interval of the frame identification time when there is no change in the attendance status for a certain period. When a change in the face recognition status occurs, it moves in the reverse direction and performs frame checks to more accurate attendance time checking. The implementation of proposed model performed at least 4.5 times faster than all frame identification and showed at least 97% accuracy.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.25-31
• /
• 2009

The necessity of university's educational change is rising up, along with a social environment that keeps changing. This study deals with a newly educational style by recognizing the necessity of variance for engineering education, according to engineers' diversified roles within a company. The study was conducted by 7 members of middle-sized group, replaced from 5 members of small-sized and each was given his task by his job such as CEO, CMO, CSO, CIO, CCO, CQO or Auditor. On the basis of four theoretical backgrounds, this paper investigated students' level of learning satisfaction shown before and after task undertaking through a questionnaire and appraised the result made before and after task undertaking. This study is expected to improve a teaching method of university engineering education.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.57-68
• /
• 1998

Work environments have been changed with the advent of new technologies, such as computer technology. However, human cognitive limits can't pace up with the change of work environment. Designing human-computer system requires knowledge and evaluation of the human cognitive processes which control information flow workload. Futhermore, under limited reaction time and/or urgent situation, human operator may the work stress, work error and resultant deleterious work environment. This paper evaluate the visual factors of major information processing factors(information density, amount of information, operational speed of speed)on operator performance of supervisory control under urgent(limited reaction time)environments which require deleterious work condition. To describe the work performance int the urgent work situations with time stress and dynamic event occurrence, a new concept of information density was introduced. For a series of experiments performed for this study, three independent variables(information amount, system proceeding speed, information density) were evaluated using five dependent variables. The result of statistical analyses indicate that the amount of information affected on all of five dependent measure. Number of failure and number of secondary task score were influenced by both amount of information and operational speed of system. However reaction time of secondary task were affected by both amount of information and information density. As a result, the deleterious factors for the performances seemed to be a scanning time to supervise each control panel. Consequently, a new display panel was suggest to reduce operator work load for scanning task showing better operator performance.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.371-377
• /
• 2012

Objective: The aim of this study is to investigate effect of driver's cognitive distraction on driver's physiological state and driving performance, and then to determine parameters appropriate for detecting the cognitive distraction. Background: Driver distraction is a major cause of traffic accidents and poses a serious threat to traffic safety due to ever increasing use of in-vehicle information systems and mobile phones during driving. Cognitive distraction, among four different types of distractions, prevents a driver from processing traffic information correctly and adapting to change in surround vehicle behavior in time. However, the cognitive distraction is more difficult to detect because it normally does not involve significant change in driver behavior. Method: A full-scale driving simulator was used to create virtual driving environment and situations. Participants in the experiment drove the driving simulator in three different conditions: attentive driving with no secondary task, driving and conducting secondary task of adding numbers, and driving and conducting secondary task of conversing with an experimenter. Parameters related with driver's physiological state and driving performance were measured and analyzed for their change. Results: The experiment results show that driver's cognitive distraction, induced by secondary task of addition and conversation during driving, increased driver's cognitive workload, and indeed brought change in driver's physiological state and degraded driving performance. Conclusion: The galvanic skin response, pupil size, steering reversal rate, and driver reaction time are shown to be statistically significant for detecting cognitive distraction. The appropriate combination of these parameters will be used to detect the cognitive distraction and estimate risk of traffic accidents in real-time for a driver distraction warning system.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.1
• /
• pp.151-159
• /
• 2024

Purpose : This study was conducted to investigate correlation between patient satisfaction and rehabilitation motivation in a physical therapy environment. Methods : This study conducted a survey on musculoskeletal and neurological patients receiving rehabilitation treatment at a hospital. The subjects of the study were patients who were currently receiving rehabilitation treatment, either hospitalized or outpatient. 234 people were collected. A questionnaire was consisted of a total of 55 questions, including 27 questions about motivation for rehabilitation, 14 questions about physical therapy service environment, and 14 questions about patient satisfaction and intention to revisit. The detailed items in rehabilitation motivation consisted of 8 questions about task-oriented motivation, 7 questions about change-oriented motivation, 4 questions about obligatory motivation, 4 questions about external motivation, and 4 questions about intrinsic motivation, and in the physical therapy service environment, 4 questions about facility service and therapist service. , 6 questions, 4 questions about services used, 3 questions about friendliness, 4 questions about professionalism, 3 questions about treatment satisfaction, and 2 questions each about repeat visit and recommendation. Results : Facility service (r=.21) was highly correlated for task-oriented motivation, therapist service (r=.22) for change-oriented motivation, therapist service (r=.31) for mandatory motivation, therapist service (r=.19) for external motivation, and facility service (r=.56) for internal motivation. Revisit for task-oriented motivation (r=.47) is kind to change-oriented motives (r=-.13) was highly correlated with kindness (r=.19) for mandatory motives, recommendation (r=.14) for external motives, and expertise (r=.52) for internal motives. There was a high correlation between professionalism (r=.61) for facility services and kindness (r=.53) for therapist services, and revisit (r=.40) for service use. Conclusion : According to the results of this study, it was found that there was a correlation between patient satisfaction and rehabilitation motivation in a physical therapy environment.

• Journal of Mechanical Science and Technology
• /
• v.15 no.5
• /
• pp.544-554
• /
• 2001

A shop floor can be considered as an important level to develop Computer Integrated Manufacturing system (CIMs). However, a shop floor is a dynamic environment where unexpected events continuously occur, and impose changes to the planned activities. To deal with this problem, a shop floor should adopt an appropriate control system that is responsible for the coordination and control of the manufacturing physical flow and information flow. In this paper, a hybrid control system is described with a shop floor activity methodology called Multi-Layered Task Initiation Diagram (MTD). The architecture of the control model contains three levels: i.e., he shop floor controller (SFC), the intelligent agent controller (IAC) and the equipment controller (EC). The methodology behind the development of the control system is an intelligent multi-agent paradigm that enables the shop floor control system to be an independent, an autonomous, and distributed system, and to achieve an adaptability to change of the manufacturing environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.15-20
• /
• 2002

An electro-hydraulic manipulator using hydraulic actuators has many nonlinear elements, and its parameter fluctuations are greater than those of an electrically driven manipulator. So it is relatively difficult to realize not only stable contact work but also accurate force control for the automatic assembly tasks using hydraulic manipulators. In this manuscript, we applied a compliance control, which is based on the position control by a disturbance observer for our manipulator system. A reference trajectory modification method is proposed in order to achieve accurate force control even though the stiffness and the position of the environment change. Experimental results show that highly robust force tracking by a 6-link electro-hydraulic manipulator could be achieved under various environment conditions. The proposed force control algorithm is applied to the approaching of bolt and the wrenching of nut tasks as one typical task in the maintenance work of live power electric line and is experimentally confirmed very effective for the task.