• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.137-141
• /
• 1998

Todays the efficient management of container has not been realized in container terminal, because of the excessive quantity of container transported and manual system. For the efficient and automated management of container in terminal, the automated container identifier recognition system in terminal is a significant problem. However, the identifier recognition rate is decreased owing to the difficulty of image preprocessing caused the refraction of container surface, the change of weather and the damaged identifier characters. Therefore, this paper proposes more accurate system for container identifier recognition as suggestion of Line-Scan Proper Region Detect for stronger preprocessing against external noisy element and Moment Back-Propagation Neural Network to recognize identifier.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.166-172
• /
• 2003

Vibration and Noise of air conditioner are entirely determined by compressor vibration. Compressor vibration transmitted to the enclosure of air conditioner or pipes connected compressor with heat exchanger. Enclosure generate(noise and vibration. Therefore, the analysis of compressor vibration analysis is considered significant technical issue. For the reduction of vibration of compressor, it is necessary to grasp correctly vibration transmission paths and excitation sources in the compressor shell. Because, shell ( Surface of compressor ) shows whole vibration characteristic of compressor mechanism. In this paper, vibration intensity was applied to measure vibration energy flow on the shell .From this technique, it is possible to catch the path of vibration propagation along the one cycle and the location of vibration energy sources may change with time on the shell.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1865-1870
• /
• 2000

Sound propagation along the surface of the ground can be affected by the roughness of the ground surface and the direction of the wind. Noise Source parameter and ground factor are estimated using the measured results of two points under particular environmental condition, and the noise level of arbitrary points under the same environmental condition can be estimated. The results can be used for the prediction of the noise level from a source above a plain and homogeneous ground surface with no obstacles nearby. Upward and downward conditions are also addressed in addition to ground effect. The proposed method can be utilized to estimate the noise level of specific noise environment and its validity was confirmed with the results of actual field measurement.

• 한국조경학회지
• /
• 제21권1호
• /
• pp.139-148
• /
• 1993

The present experiments have been conducted to find out the plant's growth environments habitate, mode of life, characteristic of photosynthesis, habit of growth and propagation. The results of this study are as follows: 1. Sambucus williamsii var. Coreana distributes around all sides of native site without having any relation to altitude, inclination and direction. 2. In the native site, Robinia pseudo - acacia and its neighboring species were Prunus yedoensis, Acer pseudo-sieboldianum, Lindera obtusiloba and Staphylea bumalda. From 21 to 41 types of species were located in the vegetation of the quadrat area. 3. According to the variation of leaf temperature with the result of the change of net photosynthetic rate, the optimum temperature for growth is $25^{\circ}C$. 4. The rooted rate of vegetative propagation was the highest at 100ppm IBA plot and the lowest at 200ppm BA plot. 5. The rooted rates of Sambucus williamsii var. coreana in perlite 50% bed, vermiculite bed and peatmoss 50%+sand 50% bed are higher than others.

• 한국조경학회지
• /
• 제21권1호
• /
• pp.83-94
• /
• 1993

After coming this century, as the propagative method of plants on a scientific foundation has been accompanied systematically, it has played an important part in the improvement of cultivar. But an existing propagative technique is not a few defects in our tasks and industrial structure which changes every hour and envirnment which undergoes a sudden change. To use developed biological knowledge recently, and existing propagative method which is main axis in sexual reproductive crossing, is increased much in the inside of internal organs by asexual reproductive means which is on a different level, and by, introducing a new character, it improves an inherited character etc. We have observed methods which supplement or replace a defect. These methods are not yet ripe for putting to practical use in the present research phase but convinced that they will offer an epoch-marking turning point.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.973-978
• /
• 2003

Vibration and Noise of air conditioner are entirely determined by compressor vibration. Compressor vibration transmitted to the enclosure of air conditioner or Pipes connected compressor with heat exchanger. Enclosure generated noise and vibration. Therefore, the analysis of compressor vibration analysis is considered significant technical issue. For the reduction of vibration of compressor, it is necessary to grasp correctly vibration transmission paths and excitation sources in the compressor shell. Because, shell (Surface of compressor) shows whole vibration characteristic of compressor mechanism. In this paper, vibration intensity was applied to measure vibration energy flow on the shell. From this technique, it is possible to catch the path of vibration propagation along the one cycle and the location of vibration energy sources may change with time on the shell.

• 천문학회보
• /
• 제41권1호
• /
• pp.72.4-73
• /
• 2016

For the development of magneto rotational instability, which drives mass accretion in protoplanetary disks, sufficient ionization degree is needed. Cosmic rays are believed to be one of the dominant ionization sources for protoplanetary disk gas. In previous studies, ionization rates are computed by considering the effect of attenuation of the cosmic ray (CR) intensity as a function of column density in an unmagnetized cloud. However, in reality particles should sweep up larger column density to reach at the midplane of disk due to their gyromotion. In this study, we investigate the propagation of CR protons in a protoplanetary disk by solving transport and energy loss equations. We discuss the change in CR intensity due to magnetic field in a protoplanetary disk.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.110-117
• /
• 2001

In the weldments, the crack propagation rate is changed due to the residual stress. The crack propagation rate is high in the region with the residual stress. However it shows the same behavior with the base metal in the region that does not include the residual stress. The fatigue crack growth rate for the material with residual stresses can be predicted more precisely by using the effective stress ratio. The difference between experimental results and prediction results seems to be due to the redistribution of the residual stresses and microstructural change.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.29-38
• /
• 1997

Crack penetration behavior by fatigue crack propagation and measurements of AE before-and-after crack penetration were examined using SS41 steel plate. Experimental crack shape of SU type was in good agreement with calculated shape rather than S type. Crack propagation behavior on the front surface appears not to change markedly after penetration. However, crack growth on the back surface appears to accelerate as reported by author. As a crack propagates, AE occurred heavily just before penetration. Then, it decreases and crack is penetrating. A transition from plane strain to plane stress was observed by fractographic study. At this time, separation of fracture surface was shown which affects AE occurrence.

• 한국항만학회지
• /
• 제12권2호
• /
• pp.225-232
• /
• 1998

Todays, the efficient management of container has not been realized in container terminal, because of the excessive quantity of container transported and manual system. For the efficient and automated management of container in terminal, the automated container identifier recognition system in terminal is a significant problem. However, the identifier recognition rate is decreased owing to the difficulty of image preprocessing caused the refraction of container surface, the change of weather and the damaged identifier characters. Therefore, this paper proposes more accurate system for container identifier recognition as suggestion of LSPRD(Line-Scan Proper Region Detection) for stronger preprocessing against external noisy element and MBP(Momentum Back-Propagation) neural network to recognize the identifier.