• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1041-1044
• /
• 2000

The enhancement to the back-propagation algorithm presented in this paper has resulted from the need to extract sparsely connected networks from networks employing product terms. The enhancement works in conjunction with the back-propagation weight update process, so that the actions of weight zeroing and weight stimulation enhance each other. It is shown that the error measure, can also be interpreted as rate of weight change (as opposed to ${\Delta}W_{ij}$), and consequently used to determine when weights have reached a stable state. Weights judged to be stable are then compared to a zero weight threshold. Should they fall below this threshold, then the weight in question is zeroed. Simulation of such a system is shown to return improved learning rates and reduce network connection requirements, with respect to the optimal network solution, trained using the normal back-propagation algorithm for Multi-Layer Perceptron (MLP), Higher Order Neural Network (HONN) and Sigma-Pi networks.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.104-109
• /
• 2002

본 논문에서는 전파경로를 구할 수 있는 모델을 제안하였다. 이 모델은 가시거리영역에서 마지막으로 이루어지는 반사위치를 입사각의 변화에 따라 다르게 구하였고. 도심지역의 다양한 형태를 고려하기 위해 도로폭과 교차각을 각각 변화시켰다. 그 결과 전파경로는 교차각이 15$^{\circ}$~75$^{\circ}$로 변화함에 따라 증가하였으며 기존모델 보다 대략 1[dB]~2[dB]정도 감쇄됨을 알 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• 제31권1호
• /
• pp.41-50
• /
• 2014

The Earth is not perfectly spherical and its rotational axis is not fixed in space, and these geophysical and kinematic irregularities work as dominant perturbations in satellite orbit propagation. The International Earth Rotation Service (IERS) provides the Conventions as guidelines for using the Earth's model and the reference time and coordinate systems defined by the International Astronomical Union (IAU). These guidelines are directly applied to model orbital dynamics of Earth satellites. In the present work, the effects of the latest conventions released in 2010 on orbit propagation are investigated by comparison with cases of applying the previous guidelines, IERS Conventions (2003). All seven major updates are tested, i.e., for the models of the precession/nutation, the geopotential, the ocean tides, the ocean pole tides, the free core nutation, the polar motion, and the solar system ephemeris. The resultant position differences for one week of orbit propagation range from tens of meters for the geopotential model change from EGM96 to EGM2008 to a few mm for the precession/nutation model change from IAU2000 to IAU2006. The along-track differences vary secularly while the cross-track components show periodic variation. However, the radial-track position differences are very small compared with the other components in all cases. These phenomena reflect the variation of the ascending node and the argument of latitude. The reason is that the changed models tested in the current study can be regarded as small fluctuations of the geopotential model from the point of view of orbital dynamics. The ascending node and the argument of latitude are more sensitive to the geopotential than the other elements. This study contributes to understanding of the relation between the Earth's geophysical properties and orbital motion of satellites as well as satellite-based observations.

• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.173-181
• /
• 2014

정상초음파장의 주파수 변이가 프로판/공기 예혼합화염의 전파거동 및 구조변이에 미치는 영향을 규명하기 위해 실험적 연구를 수행하였다. 다양한 당량비 조건에서 슐리렌 기법을 적용한 전파화염 가시화와 연소실 내부압력 측정을 통해 생성물 영역에서의 화염 구조변화 및 전파특성을 관찰하였다. 정상초음파가 존재할 경우 화염선단이 찌그러지고 기연부에서 횡방향 줄무늬가 생성되며, 이러한 구조변이는 정상초음파의 주파수에 종속한다. 또, 전파속도는 정상초음파가 교반하는 경우 증가되며, 화염전파 거동에 미치는 초음파의 영향은 주파수의 증가에 따라 보다 명확해진다는 사실도 확인되었다.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.38-43
• /
• 2014

굽힘파 전파 특성을 이용하여 지지강성을 도출하고 이를 이용한 레일체결장치의 결함 검출 시험법을 제안하였다. 점탄성 패드로 지지되고 체결장치로 고정된 레일의 진동 응답은 주파수에 따라 지지단 동특성에 크게 영향을 받는다. 체결장치에 결함이 발생할 경우에는 구조적인 불연속성으로 인해 굽힘 파동의 전파 특성이 변화하게 된다. 이러한 변화를 감지하기 위해서 전달함수법을 이용해 주파수에 따라 변화하는 레일 지지단 동특성을 측정하였다. 연속 스프링으로 지지된 레일 응답으로부터 예측한 레일의 보존에너지를 이용해 결함에 대한 파동 전파의 민감도를 해석하였다. 민감도 해석 결과와 동적지지강성 변화를 측정하여 손상지수를 계산하고 결함 위치를 추정하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 춘계학술대회
• /
• pp.43-43
• /
• 2020

Plants regenerated from in vitro cultures are associated with chromosomal variations, which have been generally found in long-term culture. Reducing plant culture age is one of the ways to reduce genetic and epigenetic changes. The present study focused on the efficient in vitro propagation of lily cultivars and has intensified to speed up bulb propagation for cryopreservation. The multiplication process applied in this experiment uses starting material, which the newly small bulb formed from bulb-scales in two lily cultivars. The adventitious bulb from bulb-scale tissue cultured on three different media following Murashige and Skoog (MS) basal medium supplemented with 1 g/L Charcoal, MS medium containing 0.3 mg/L IAA and 0.4 mg/L BA hormone with or without Charcoal, respectively. After about seven weeks, there is little change in the number of newly propagated bulbs in small bulbs of the two media. Compared to the both mediums, the number of the propagated bulbs is increased 5 times in MS medium containing 0.3 mg/L IAA and 0.4 mg/L BA hormone without Charcoal. After about seven weeks, the results of the propagation showed that the number of the propagated bulbs is increased 5 times in MS medium containing 0.3 mg/L IAA and 0.4 mg/L BA hormone without Charcoal compared to the both mediums. The number of propagated bulbs ranged from 5 to 6 and 4 to 6 with an average of 5 in Tropicalpink and Greenstar cultivars, respectively. There is little change in the number of newly propagated bulbs in small bulbs of other media. The multiplication process applied in this study may save in vitro culture period and effort.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.198-198
• /
• 1991

Not only difference of fatigue crack growth and propagation behavior resulted from the grain size, the hardness ratio and volume fraction in M.E.F. dual phase steel composed of martensite in hard phase and ferrite in soft phase, but also the effects of the plastic constraint were investigated by fracture mechanics and microstructural method. The main results obtained are as follows: 1) The fatigue endurance of M.E.F. steel increases with decreasing the grain size, increasing the ratio of hardness and volume fraction. 2) The initiation of slip and crack occures faster as the stress level goes higher. These phenomena result from the plastic constraint effect of the second phase. 3) The crack propagation rate in the constant stress level is faster as the grain size gets larger, the ratio of hardness lower and volume fraction smaller.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1542-1551
• /
• 2006

In the Grid Database, some replicas will have more requests from the clients than others. A fast consistency algorithm has been presented to satisfy the high demand nodes in a shorter period of time. But it has poor performance in multiple regions of high demand for forming the island of locally consistent replicas. Then, a leader election method is proposed, whereas it needs much additional cost for periodic leader election, information storage, and message passing, Also, false leader can be created. In this paper, we propose a tree-based algorithm for replica update propagation. Leader replicas with high demand are considered as the roots of trees which are interconnected. All the other replicas are sorted and considered as nodes of the trees. Once an update occurs at any replica, it need be transmitted to the leader replicas first. Every node that receives the update propagates it to its children in the tree. The update propagation is optimized by cost reduction for fixed propagation schedule. And it is also flexible for the dynamic model in which the demand conditions change with time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.286-291
• /
• 2001

Most cracks in the structure occur under mixed mode loadings and those propagation depend on the stress ratio very much. So, it is necessary to study the fatigue behavior under mixed mode loading as stress ratio changes. In this paper, fatigue crack propagation behavior was investigated respectively at stress ratio 0.1, 0.3, 0.5, 0.7 and we change loading application angle to $0^{\circ},\;30^{\circ},\;60^{\circ}$ to apply various loading. mode. The mode I and II stress intensity factors of CTS specimen used in this study were calculated by displacement extrapolation method using FEM(ABAQUS). Using both the study through the experiment and the theoretical study through FEM analysis, we studied the relation between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress condition and given loading mode condition, we studied what the dominant factors of the crack propagation rate were at each case.

• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.