• 한국기후변화학회지
• /
• 제8권2호
• /
• pp.145-151
• /
• 2017

Korea's energy consumption has been constantly increasing. Final energy consumption was increased by anannual average of 2.9% compared to 2010. The consumption of all energy sources except for its oil was increased during the same time. While electric demand has increased coal consumption increased rapidly. Therefore, calorfic value and carbon emission factor development can improve the quality of Korea's greenhouse gas inventory. Calorific value is the amount of heat generated while burning coal. Caloric value is one of the most important factors in the development of carbon emission factors. Calorific value is used as the basis for the analysis of the various energy statistics. This study has calculated the sub-bituminous coal's calorfic value by the data received from domestic coal-fired power plants. Calorofic value's trend analysis period is the year of 2011~2015. Through analyzing the carbon content it was calculated the carbon emission factor. The sub-bituminous coal's uncertainty analysis was performed using a Monte Carlo simulation.

• 한국기후변화학회지
• /
• 제7권2호
• /
• pp.193-203
• /
• 2016

The importance of forecasting agricultural production is receiving attention while climate change is accelerating. This study suggested three types of crop yield forecasting model for major vegetable crops by using downscaled meteorological information of main production area on farmland level, which identified as limitation from previous studies. First, this study conducted correlation analysis with seven types of farm level downscaled meteorological informations and reported crop yield of main production area. After, we selected three types of meteorological factors which showed the highest relation with each crop species and regions. Parameters were deducted from meterological factor with high correlation but crop species number was neglected. After, crop yield of each crops was estimated by using the three suggested types of models. Chinese cabbage showed high accuracy in overall, while the accuracy of daikon and onion was quiet revised by neglecting the outlier. Chili and garlic showed differences by region, but Kyungbuk chili and Chungnam, Kyungsang garlic appeared significant accuracy. We also selected key meteorological factor of each crops which has the highest relation with crop yield. If the factor had significant relation with the quantity, it explains better about the variations of key meteorological factor. This study will contribute to establishing the methodology of future studies by estimating the crop yield of different species by using farmland meterological information and relatively simplify multiple linear regression models.

• 무역학회지
• /
• 제41권5호
• /
• pp.353-371
• /
• 2016

본 연구는 1980-2013년 기간 동안 한국 제조업 내 수출산업과 수입산업의 구조변화와 총요소 생산성의 변화를 분석하고 있다. 분석결과는 제조업 내 13개 산업 중 절반 이상의 산업이 수출입의 방향이 바뀌는 등 전반적으로 산업구조의 변화가 상당히 큰 폭으로 진행되어 왔음을 보여준다. 또 수입산업보다 수출산업에서 수출만이 아니라 생산도 크게 증가하였다. 이는 수출산업이 한국경제의 성장을 주도해 왔음을 보여준다. 또 어느 산업에서나 노동투입보다는 자본투입 증가율이 더 높은데, 이는 그간 생산방법이 보다 자본집약적인 형태로 변해 왔음을 말해준다. 마지막으로 총요소생산성 증가율도 수입산업보다는 수출산업에서 훨씬 더 높다. 패널회귀분석 결과도 수출산업에서 총요소생산성이 더 높음을 말해준다.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• 대한방사선치료학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 1996

We are often faced with the clinical situations that is inevitably extended SSD for electron beam therapy due to anatomical restriction or applicator structure. But there are some difficulties in accurately predicting output and properties. In electron beam treatment , unlike photon beam the decrease in output for extended SSD does not follow inverse-square law accurately because of a loss of side scatter equilibrium, which is particularly significant for small cone size and low energies. The purpose of our study is to analyze the output in changing with the energy, cone size, air gap beyond the standard SSD and to compare inverse-square law factor derived from calculated effective SSD, mominal SSD with measured output factor. In addition, we have analyzed the change of PDD for several cones with different SSDs which range from 100cm to 120cm with 5cm step and with different energies(6MeV, 9MeV, 12MeV, 16MeV, 20MeV). In accordance with our study, an extended SSD produces a significant change in beam output, negligible change in depth dose which range from 100cm to 120cm SSDs. In order to deliver the more accurate dose to the neoplastic tissue, first of all we recommend inverse-square law using the table of effective SSDs with cone sizes and energies respectively or simply to create a table of extended SSD air gap correction factor. The second we need to have an insight into some change of dose distribution including PPD, penumbra caused by extended SSD for electron beam therapy.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• 한국기후변화학회지
• /
• 제8권4호
• /
• pp.393-399
• /
• 2017

According to the United Nations Framework Convention on Climate Change (UNFCCC), all parties have to submit the national GHG inventory report. Estimating carbon stocks and changes in Land Use, Land-Use Changes and Forestry (LULUCF) needs an activity data and emission factors. So this study was conducted to develop carbon emission factor for Robinia pseudoacacia L., Betula platyphylla var. japonica, and Liriodendron tulipifera. As a result, the basic wood density ($g/cm_3$) was 0.64 for R. pseudoacacia, 0.55 for B. platyphylla, and 0.46 for L. tulipifera. Biomass expansion factor was 1.47 for R. pseudoacacia, 1.30 for B. platyphylla, and 1.24 for L. tulipifera. Root to shoot ratio was 0.48 for R. pseudoacacia, 0.29 for B. platyphylla, and 0.23 for L. tulipifera. Uncertainty of estimated emission factors on three species ranged from 3.39% to 27.43% within recommended value (30%) by IPCC. We calculated carbon stock and change using these emission factors. Three species stored carbon in forest and net $CO_2$ removal was $1,255,398\;t\;CO_2/yr$ during 5 years. So we concluded that our result could be used as emission factors for national GHG inventory report on forest sector.

• 수산경영론집
• /
• 제50권2호
• /
• pp.41-56
• /
• 2019

The aim of this study is to analyze the productivity change of pollock enterprise by applying a mutually quadratic hyperbolic model and a bootstrapping model. This study used 20 units of pollock firms data (from 2013 to 2017). As a result of total productivity analysis of twenty pollock enterprises, total factor productivity was estimated to have decreased by 24.9% over the last five years (2013~2017). The main cause of this productivity decline was analyzed by technical change. In terms of annual productivity change, it showed decrease 3.0% in 2013~2014, 7.8% in 2014~2015, 4.5% in 2015~2016 and 4.7% in 2016~2017 respectively. In the analysis of productivity by corporation type, total factor productivity showed a significant decrease in both general corporation and external corporation, and productivity decrease (-29.3%) was larger than general corporation (-23.0%). In the productivity analysis by type of business, total factor productivity decreased significantly in the order of wholesale and commodity brokerage (-26.3%), food manufacturing (-25.1%) and fisheries (-15.3%). This decrease in productivity was caused by the technological change which indicates a downward shift in the production curve that is significant in all sectors.

• 패션비즈니스
• /
• 제21권4호
• /
• pp.61-72
• /
• 2017

The purpose of this study was to analyze the impact of climate change cognition on clothing behavior of fashion consumers to understand the impact of climate change on the fashion system. An online survey was conducted of 385 people in their 20s-50s working in the fashion industry as well as general consumers. Data collected from surveys were analyzed by factor analysis and t-test. Results are as follow: First, climate change cognition consists of four sub-dimensions, which are 'knowledge of climate change' and 'recognition of climate change in Korea'. Second, clothing behavior related with climate change consists of six sub-dimensions, which are 'environmentally-friendly fashion purchases', 'new clothes-wearing style affected by climate change', 'ethical fashion consumption', 'pursuit of functional fashion', 'pursuit of seasonless fashion', and 'clothes-wearing in response to climate change.' Last, the group with higher cognition of climate change than the group with lesser cognition had significantly higher degree of trying new styles created because of climate change, making ethical fashion purchases, pursuing functional fashion, and wearing clothes in response to climate change.

• 경영과학
• /
• 제13권1호
• /
• pp.135-156
• /
• 1996

The purpose of this paper is to study the links between manufacturing strategy and change programs of manufacturing firms in Korea. The nature of our analysis is more descriptive than normative or confirmative. First, we investigate the linkage between manufacturing strategy, manufacturing capability, change programs and performance measurement systems. Secondly, we intend to explore an empirical typology of manufacturing strategy and change programs. The initial findings of the study are as follows: Linkage between manufacturing strategy and change programs of manufacturing firms was not apparent. Flexibility as a strategic priority is positively related to the innovative change programs. There are two distinctive strategies of manufacturing firms in Korea, namely, quality strategy and balanced strategy. We identified three types of change programs, which are incremental change, administrative innovation, and process innovation. Incremental change group has represented low factor score in the change program dimensions. The firms in administrative innovation group mainly depend on information systems and business reengineering. Korean manufacturing firms seem to pursue process improvement by trying simultaneously incremental change in the process, managerial process improvement, and a little bit of innovative change. Performance variable utilization of the firms are not significantly different along with manufacturing strategies and change programs. We found, however, learning and improvement performance dimension is significantly related to flexibility variables. Process innovation group marked high score in usage of learning and improvement indices. The findings of this study seem to have various implications on realigning the manufacturing strategy, change programs, and performance systems in Korean firms.