• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.893-897
• /
• 2004

In this paper, we studied the mechanical and thermal properties on slice XLPE sheet from 22 kV and 154 kV power cables. Interface structures are XLPE/semiconductor and XLPE/water/semiconductor. We evaluated mechanical property, thermal analysis, moisture analysis. Based on mechanical and thermal properties of the 22 kV XLPE sheet, elongation, mechanical strength, and melting point were evaluated to be 485.48 %, 1.74 kgf/$\textrm{mm}^2$ and $102.48^{\circ}C$, respectively. It was also evaluated from the mechanical and thermal properties of 154 kV XLPE sheet that elongation, mechanical strength, and melting point are 507.81 %, 1.8 kgf/$\textrm{mm}^2$, $106.9^{\circ}C$, respectively. A region shows a rapid increase in tension strength, and B region only shows increase in elongation under 1.0 kgf/$\textrm{mm}^2$, C region shows increase in both elongation and tension strength. Difference of melting point came from the chain of XLPE polymer and the difference of crystallization. Moisture density of semiconductor showed 800 ∼ 1200 ppm before extrude, 14000 ∼24000 ppm after extrude. These values were higher than the moisture density of XLPE (300∼560) ppm.

• Journal of Fashion Business
• /
• v.14 no.2
• /
• pp.57-72
• /
• 2010

The purposes of the research were to find out the clothing construction factors of the mechanical industry working clothes by analyzing the working clothes supplied to 5 subject companies; and to suggest the optimized sewing conditions and the seam strength and elongation experimental data according to the clothing material and seam types implied to the working clothes collected. The fabric types and trimmings used for the mechanical manufacturing working clothes were Polyester/Cotton(65/35%), Polyester/Rayon(65/35%), Cotton(100%); and linings, interlining, various fastenings etc. 2 stitch types, i.e. lock and two-thread chain stitches were applied to the construction of the flat, lap felled, French, superimposed, lapped and bound seams for the seam strength and elongation experiment. The results derived from the experiment were as follows. (1) The seam strength results according to the seam types were high in the order of lap felled>lapped>flat, superimposed and French seams. (2) Considering the features of the seam construction, as the number of fabric layers at the seam line increased the seam strength also increased. (3) Apart from the highest seam strength from the experiment using the net lining with the main fabric, the seam construction consisting of two fabric layers with the interlining showed relatively high seam strength results. (4) The seam elongations according to the stitch types were high in the order of two-thread chain>lock stitches.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.61-66
• /
• 2017

Poly lactic acid(PLA) and poly butylene adipate-co-terephthalate(PBAT) film was prepared using a twin extruder. PLA (25%) and PBAT (75%) were mixed with various ratio of chain extenders, such as $Joncryl^{(R)}$ and hexamethylene diisocyanate(HDI) to improve the mechanical and thermal properties of produced bio composite films. Tensile strengths of films were steadily increased with increasing ratio of chain extender. The tensile strength of control films was about 25 MPa, and the tensile strength of films with combined chain extenders was above 40 MPa. The films with $Joncryl^{(R)}$ resulted in improved tensile strength, while the film with HDI alone showed improved percent elongation at break. By adding chain extenders into PLA/PBAT resin, the cold crystallization temperature (Tcc) and decomposition temperature (Td) of the produced bio composite films increased. It revealed that the addition of two types of chain extenders was efficient way to get PLA/PBAT film with improved strength and elongation.

• Journal of Ginseng Research
• /
• v.44 no.2
• /
• pp.321-331
• /
• 2020

Background: The patatin-related phospholipase AIII family (pPLAIIIs) genes alter cell elongation and cell wall composition in Arabidopsis and rice plant, suggesting diverse commercial purposes of the economically important medicinal ginseng plant. Herein, we show the functional characterization of a ginseng pPLAIII gene for the first time and discuss its potential applications. Methods: pPLAIIIs were identified from ginseng expressed sequence tag clones and further confirmed by search against ginseng database and polymerase chain reaction. A clone showing the highest homology with pPLAIIIβ was shown to be overexpressed in Arabidopsis using Agrobacterium. Quantitative polymerase chain reaction was performed to analyze ginseng pPLAIIIβ expression. Phenotypes were observed using a low-vacuum scanning electron microscope. Lignin was stained using phloroglucinol and quantified using acetyl bromide. Results: The PgpPLAIIIβ transcripts were observed in all organs of 2-year-old ginseng. Overexpression of ginseng pPLAIIIβ (PgpPLAIIIβ-OE) in Arabidopsis resulted in small and stunted plants. It shortened the trichomes and decreased trichome number, indicating defects in cell polarity. Furthermore, OE lines exhibited enlarged seeds with less number per silique. The YUCCA9 gene was downregulated in the OE lines, which is reported to be associated with lignification. Accordingly, lignin was stained less in the OE lines, and the expression of two transcription factors related to lignin biosynthesis was also decreased significantly. Conclusion: Overexpression of pPLAIIIβ retarded cell elongation in all the tested organs except seeds, which were longer and thicker than those of the controls. Shorter root length is related to auxinresponsive genes, and its stunted phenotype showed decreased lignin content.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.203-212
• /
• 2011

In this study we experimented that how chain extension influences to waterborne urethane-acrylic hybrid resin for leather garment coatings. We knew that polyurethane-acrylic hybrid resins had 5 grades of solvent resistance. Tensile strength measured in the polyurethane-acrylic resin(EDA 5.37 g, 1.928 kgf/$mm^2$) had the most strong strength. Also polyurethane-acylic hybrid resin(EDA 5.37 g. 30.2 mg. loss) had better result than other hybrid resins. EDA contents higher, we obtained low elongation and low flexibility. In this result, chain extension of waterborne polyurethane-acrylic hybrid resin showed the effect in leather coating with ratio of EDA.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.297-303
• /
• 2002

We have investigated the microstructural properties of a weakly charged polyelectrolyte modeled with both Hookean spring and Debye-Huckel potential, by employing a novel hybrid scheme of molecular dynamics (MD) and Monte Carlo (MC) simulations. Although the off-lattice pivot step facilitates the earlier computations stage, it gives rise to oscillations and hinders the stable equilibrium state. In order to overcome this problem, we adopt the MC off-lattice pivot step in early stage only, and then switch the computation to a pure MD step. The result shows that the computational speed-up compared to the previous method is entirely above 10 to 50, without loss of the accuracy. We examined the conformations of polyelectrolyte in solvents in terms of the end-to-end distance, radius of gyration, and structure factor with variations of the screening effects of solvent and the monomer charges. The emphasis can favorably be given on the elongation behavior of a polyelectrolyte chain, with observing the simultaneous snapshots.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.292-294
• /
• 2001

Cystocin is identified from the screening of Streptomyces sp GCA0001. It is isolated from the culture of streptomyces sp GCA0001. A white coloured cystocin is structurally similar to puromycin, an antibiotic produced by streptomyces albonrger. Like puromycin, cystocin possesses an antibacterial, antitumour and antiviral activity. It impairs the protein synthesis by inhibiting polypeptide chain elongation.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.

• The Microorganisms and Industry
• /
• v.13 no.1
• /
• pp.4-9
• /
• 1987

The regulation of gene expression in procaryotes is accomplished primarily at the level of transcription. Initiation of transcription is subject to numerous promoter-specific controls which act to ensure coordinate expression of disparate genes. The kinetics of formation of a functional("open") complex at a promoter, prior to the catalytic steps of RNA chain initiation and elongation, is thought to play a major role in controlling the efficiency of transcription of that promotor, since the subsequent processes of nucleotide binding and phosphodiester bond formation are rapid and are not promoter-specific (Mangel and Chamberlin, 1974 Shimamoto et al., 1981)

• Macromolecular Research
• /
• v.8 no.6
• /
• pp.292-297
• /
• 2000

The theoretical synthesis of the isotactic and syndiotactic poly(methyl methacrylate) were carried out as a model for real polymerization reactions following the normal chain reaction processes by repeating the uniform localization of wave functions with inclusion of the interaction between the end group of the cluster and an attaching molecule by the elongation method, and then, the calculated value was compared with the usual PM$_3$ calculation. The results revealed that a reaction of cluster with monomer molecules has made it possible to calculate the electronic structure and total energy of polymer with nearly infinite length and a matrix of constant dimension. The isotactic poly(methyl methacrylate) is more stable than syndiotactic one. The same tendency have been found between the experimentally measured properties and a calculated total energy to explain the chain motion in isotatic and syndiotactic poly(methyl methacrylate).