• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.67-67
• /
• 2002

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.239-242
• /
• 2004

We investigated the nanotopography impact on the post-chemical mechanical polishing (post-CMP) oxide thickness deviation(OTD) of ceria slurry with a surfactant. Not only the surfactant but also the slurry abrasive size influenced the nanotopography impact. The magnitude of the post-CMP OTD increased with adding the surfactant in the case of smaller abrasives, but it did not increase in the case of larger abrasives, while the magnitudes of the nanotopography heights are all similar. We created a one-dimensional numercal simulation of the nanotopography impact by taking account of the non-Prestonian behavior of the slurry, and good agreement with experiment results was obtained.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.60-60
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.17.1-17.1
• /
• 2006

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.549-554
• /
• 2006

In this paper we first applied the chemical mechanical polishing (CMP) process to the planarization of ferroelectric film in order to obtain a good planarity between electrode and ferroelectric film. $Pb_{1.1}(Zr_{0.52}Ti_{0.48})O_3$ (shortly PZT) ferroelectric film was fabricated by the sol-gel method. And then, we compared the structural characteristics before and after CMP process of PZT films. Removal rate, WIWNU% and surface roughness have been found to depend on slurry abrasive types and their hardness, especially, surface roughness and planarity were strongly depends on its pH value. A maximum in the removal rate is observed in the silica slurry, in contrast with the minimum removal rate occurs at ceria slurry. We found that the surface roughness of PZT films can be significantly reduced using the CMP technique.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.65-65
• /
• 2003

Chemical mechanical polishing (CMP) is one of the most important processes in recent ULSI (Ultra Large Scale Integrated Circuit) manufacturing technology. Recently, ceria slurries with surfactant have recently been used in STI-CMP,[1] became they have high oxide-to-nitride removal selectivity and widen the processing margin The role of the abrasives, however, on the effect of planarization on STI-CMP is not yet clear. In this study, we investigated how the crystal characteristic affects the planarization efficiency of wafer surface with controlling crystallite size and poly crystalline abrasive size independently.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.122-125
• /
• 2003

We investigated the effect of the abrasive and additive concentrations in Nano ceria slurry on the pad surface temperature under varying pressure through chemical mechanical polishing (CMP) test using blanket wafers. The pad surface temperature after CMP increased with the abrasive concentration and decreased with increase of the additive concentration in slurries for the constant down pressure. A possible mechanism is that the additive adsorbed on the film surface during polishing decreases the friction coefficient, hence the pad surface temperature gets lower with increase of the additive concentration. This difference of temperature was more remarkable for the higher concentration of abrasives. In addition, in-situ measurement of spindle motor was carried out during oxide and nitride polishing. The averaged motor current for oxide film was higher than that for nitride film, which means the higher friction coefficient.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.161-161
• /
• 2008

The oxide film of silicon wafer has been mainly polished by fumed silica, colloidal silica or ceria slurry. Because colloidal silica slurry is uniform and highly dispersed composed of spherical shape particles, by which the oxide film polished remains to be less scratched in finishing polishing process. Even though the uniformity and spherical shape is advantage for reducing the scratch, it may also be the factor to decrease the removal rate. We have studied the correlation of silica abrasive particles and CMP characteristics by varying pH, down force, and table rotation rate in polishing. It was found that the CMP polishing is dependent on the morphology, aggregation, and the surface property of the silica particles.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.64-64
• /
• 2003

고집적화된 시스템 LSI 반도체 소자 제조 공정에서 소자의 고속화 및 고성능화에 따른 배선층수의 증가와 배선 패턴 미세화에 대한 요구가 갈수록 높아져, 광역평탄화가 가능한 STI CMP(Shallow Trench Isolation Chemical-Mechanical-Polishing)공정의 중요성이 더해가고 있다. 이러한 STI CMP 공정에서 세리아 슬러리에 첨가되는 계면활성제의 농도에 따라 산화막과 질화막 사이의 연마 선택비를 제어하는 것이 필수적 과제로 등장하고 있다. 일반적인 CMP 공정에서 압력 증가에 따른 연마 제거량이 Prestonian 거동을 나타내는 반면, 연마 입자의 크기를 변화시켜 계면활성제의 농도를 달리 하였을 경우, 압력 변화에 따라 Non-Prestonian 거동이 나타나는 것을 고찰할 수 있었다. 따라서 본 연구에서는 세리아 슬러리 내에 첨가되는 계면활성 제의 농도와 연마입자의 크기를 달리한 후, 압력을 변화시킴으로 나타나는 non-Prestonian 거동에 미치는 영향에 대하여 연구하였다.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.122-123
• /
• 2002

Cu CMP process control for global planarization of semiconductor surface were studied on a platen polisher by using an experimental copper slurry containing ceria as the abrasive component. In order to understand the process. a design of experiment was conducted. From the experiment. the effects of polishing parameters such as polishing pressure, platen speed, and speed of wafer carrier on the removal rate of copper and the uniformity in copper removal were calculated and discussed. In this study, process parameters of Cu CMP and WIWNU(Within Wafer Non Uniformity) were presented.