• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.915-921
• /
• 2008

This study was carried out to investigate the recognition, preference of mushrooms and mushroom processed foods among general consumers in order to develop new mushroom processed foods. The questionnaires are consists of general questions, health status, intake frequency of mushrooms, reason for prefer mushrooms, have purchased experience or not of mushroom processed foods and prefer mushroom processed foods to want development by age. A total 1173 questionnaires were analyzed for statistical analysis. The statistical analysis was completes using SPSS Win program (Version 14.0) for descriptive analysis and $X^2$-test. Main results of this study were as follow: Most of respondents prefer mushrooms and 28.5% of the respondents like Pleurotus eryngii most. The most reasons for the prefer mushrooms are freshness. The frequency of intake mushrooms was 6-8 times per months. The most consideration factor in purchasing mushrooms was freshness/hygiene. 55.6% of the respondents had purchasing experience of mushroom processed foods to eat. The most purchased mushroom processed foods were soup and hor cereal. The most consideration factor in purchasing mushroom processed foods was improvement of taste.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.779-784
• /
• 2003

Nitrate a common component of man's chemical environment, is present in foods either naturally or in an additive introduced during processing of foods. Nitrate level of foods have been found depending on nitrosation of soils and other various environmental factors. Therefore data on nitrate contents of foods reported in other countries can not be adapted to Korean foods. Also data on nitrate levels of Korean foods available were reported 10 years ago, which would be assumed to differ from those of foods currently consuming by Koreans. The present study was attempted to determine nitrate contEnts of common foods. Based on National Nutrition Survey Report 143 food items out of 14 food groups were selected for this study Nitrate levels of common foods used in the study were from N.D (not detected) to 6733.33 mg/kg foods. Mean nitrate levels of food groups 27.2 mg/kg of cereal and grain products, 78.1 mg/kg in potatoes and potato products, 8.3 mg/kg in legumes and their products N.D of seeds and nuts, 1012.1 mg/kg of vegetables and their products,76.3 mg/kg fungi and mushrooms 42.2 mg/kg fruits,34.5 mg/kg of meat, poultry and their products,0 mg/kg in eggs, 23.9 mg/kg in fish, shellfishes and their products,23.0 mg/kg in seaweeds, 7.7 mg/kg milk and dairy products, 26.3 mg/kg in seasonings, 68.0 mg/kg in others.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.281-288
• /
• 2010

Total aflatoxin ($B_1+B_2+G_1+G_2$) maximum levels of 15 ${\mu}g/kg$ ($B_1=10\;{\mu}g/kg$) were set for grain, beans, peanut, nuts & their processed food (grinding, cutting etc.), processed cereal product & processed bean product, confectionaries (peanut or nut-containing food), soybean paste, red pepper paste, dried red pepper, processed com products for popcorn and steamed rice. The maximum levels for aflatoxin $M_1$ are 0.5 ${\mu}g/kg$ for raw milk and milks before manufacturing processing. The patulin maximum level is 50 ${\mu}g/kg$ in apple juice and apple juice concentrate (including concentrate to use as raw material and converted by concentration multiple). The ochratoxin A is managed at the maximum levels of 5 ${\mu}g/kg$ in wheat, barley, rye, coffee beans and roasted coffee, 10 ${\mu}g/kg$ in instant coffee and raisin, 2 ${\mu}g/kg$ in Grape juice, concentrated grape juice as reconstituted and wine. The fumonisins ($B_1+B_2$) maximum levels are 4000 ${\mu}g/kg$ in com, 2000 ${\mu}g/kg$ in com processed food (grinding, cutting etc.) and com powder, 1000 ${\mu}g/kg$ in processed com products. Standards for mycotoxins in food have been established and the mycotoxin risk in food is managed reasonably and scientifically, based on risk assessment and exposure analysis.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.640-645
• /
• 1995

Job's-tears(Coix lachryma-jobi L. var. Ma-yuen Stapf) seeds were processed to flakes by soaking, heat treatment, intermediate-moisture drying, flaking, drying, and cooking. Some functional properties of job's-tears flakes subjected to varing degree of heating were characterized by specific volume, texture, water absorption index(WAI), water solubility index(WSI), and viscosity. As degree of gelitinization increased within the intermediate range of $60{\sim}70%$, steam-cooked Job's-tears demonstrated appropriate rheological properties for further processes, resulting in increased specific volume and decreased breaking strength. However, excessive heat treatment rendered Job's-tears undesirably sticky for flaking, which caused adverse effects on the functional properties of flakes such as specific volume and breaking strength. Increasing steaming time$(5{\sim}30\;min)$ caused an increase in WAI and WSI values. Apparent viscosity of powdered flakes was increased with the extent of gelitinization as a function of heat processing. Viscosity of powdered flakes determined using the amylograph increased with the degree of heating applied to Job's-tears at low pasting temperatures, accompanied by a decrease in maximum viscosity as the pasting temperature increased.

• Korean Journal of Food Science and Technology
• /
• v.4 no.2
• /
• pp.77-83
• /
• 1972

In order to study the processing adaptability of naked barley, SEDOHADAKA variety produced in Cheolanam-do(1971) was milled after polishing and examined with respect to its proximate principles, amino acid composition, viscosity, raising power, and amylose content, alkali number, blue value and X-ray diffraction pattern of its starch. The results are summarized as fllows: 1) Crude fiber content of naked barley which was milled at 81.6% (A), 79.2% (B) and 74.1% (C) was $2.48{\sim}2.36%$, indicating higher level than wheat flour. 2) Whereas the initial gelatinization temperature of naked barley flour was similar to that of wheat flour, the value of naked barley starch was $89.5^{\circ}C$, higher than that of wheat starch, Amylose content of naked barley starch was 28.5%, similar to wheat starch. 3) Raising power of naked barley starch was generally lower than that common cereal starches. 4) According to the X-ray diffraction pattern diagram, the degree of crystallization was lower in naked barley starch than in non-glutinous rice starch.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.257-266
• /
• 2012

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal and dired animal forages. Analysis of forage quality by NIRS usually involves dry grinding samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations on prediction ability of chemical composition and fermentation parameter for Italian ryegrass silages by NIRS. A population of 147 Italian ryegrass silages representing a wide range in chemical parameters were used in this investigation. Samples were scanned at 1nm intervals over the wavelength range 680-2500 nm and the optical data recorded as log 1/Reflectance (log 1/R) and scanned in oven-dried grinding and fresh ungrinding condition. The spectral data were regressed against a range of chemical parameters using partial least squares (PLS) multivariate analysis in conjunction with four spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV) and maximizing the correlation coefficient of cross validation (${R^2}_{CV}$). The results of this study show that NIRS predicted the chemical parameters with high degree of accuracy in oven-dried grinding treatment except for moisture contents. Prediction accuracy of the moisture contents was better for fresh ungrinding treatment (SECV 1.37%, $R^2$ 0.96) than for oven-dried grinding treatments (SECV 4.31%, $R^2$ 0.68). Although the statistical indexes for accuracy of the prediction were the lower in fresh ungrinding treatment, fresh treatment may be acceptable when processing is costly or when some changes in component due to the processing are expected. Results of this experiment showed the possibility of NIRS method to predict the chemical composition and fermentation parameter of Italian ryegrass silages as routine analysis method in feeding value evaluation and for farmer advice.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.872-886
• /
• 2010

Six kinds of sunsik containing different contents of brown rice(BR; 20, 30, and 50%) were prepared and subjected to various processing conditions(with or without roasting at $200^{\circ}C$ for 20 min e.g., designated as RBR50 or BR50) to assess their functionality as ready-to-eat foods. They were also assessed for their nutritional and sensory properties and oxidative stability. Dietary fiber contents were proportionate to the levels of added BR. Protein was highest in RBR50 (p<0.001), which also had the highest amounts of free and structural amino acids. The amount of free amino acids tended to increase with roasting, although most amino acids were present in structural form. Oleic acid and linoleic acid were the predominant fatty acids in all prepared sunsik, and RBR50 presented noticeably higher peroxidability index due to its higher amount of linoleic acid(p<0.05). Nevertheless, RBR50 showed good oxidative stability; this phenomenon was observed in all sunsik with roasted BR but not in those with non-roasted BR. It is implied that potential antioxidants might have been newly formed or converted from their precursors while BR was roasted. Roasting process also had an impact on the sensory properties of sunsik, e.g., sunsik with added roasted BR showed lower dissolution and darker color intensity compared to its counterpart sunsik.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1996.07a
• /
• pp.61-74
• /
• 1996

Human and monogastric animals can not synthesize 10 out of the 20 amino asids and therefor need to obtain these from their diet. The plant seed is a major source of dietary protein. It is particular important in their study to increase nutritional quality of the seed storage proteins. The low contents of lysine, asparagine and threonenein various cereal seeds and of cystein and methionine. In legume seeds is due to the low proportions of these amino acids in the major storage proteins, we have tried to apply the three strategies; (1) mutagenesis and selection of specific amino acid analogue resistance, (2) cloning and expression study of lysine biosynthesis related gene, (3) transfomation of lysine rich soybean glycinin gene. The 5-methyltryptophan (5MT) resistant cell lines, SAR1, SAR2 and SAR3 were selected from anther derived callus of rice (Oryza sativa L. "Sasanishiki"). Among these selected cell lines, two (SAR1 and SAR3) were able to grow stably at 200 mg/L of 5MT. Analysis of the freed amino acids in callus shows that 5MT resistant cells (SAR3) accumulated free tryptophan at least up to 50 times higher than those that of the higher than of SAS. These results indicated that the 5MT resistant cell lines are useful in studies of amino acid biosynthesis. Tr75, a rice (Oryza sativa L., var. Sasanishiki) mutant resistant to 5MT was segregated from the progenies of its initial mutant line, TR1. The 5MT resistant of TR75 was inherited in the M8 generations as a single dominant nuclear gene. The content of free amino acids in the TR75 homozygous seeds increased approximately 1.5 to 2.0 fold compared to wild-type seeds. Especially, the contents of tryptophan, phenylalanine and aspartic acid were 5.0, 5.3 and 2.7 times higher than those of wild-type seeds, respectively. The content of lysine is significantly low in rice. The lysine is synthesized by a complex pathway that is predominantly regulated by feedback inhibition of several enzymes including asparginase, aspatate kinase, dihydrodipicolinat synthase, etc. For understanding the regulation mechanism of lysine synthesis in rice, we try to clone the lysine biosynthetic metabolism related gene, DHPS and asparaginase, from rice. We have isolated a rice DHPS genomic clone which contains an ORF of 1044 nucleotides (347 amino acids, Mr. 38, 381 daltons), an intron of 587 nucleotides and 5'and 3'-flanking regions by screening of rice genomic DNA library. Deduced amino acid sequence of mature peptide domain of GDHPS clone is highly conserved in monocot and dicot plants whereas that of transit peptide domain is extremely different depending on plant specie. Southern blot analysis indicated that GDHPS is located two copy gene in rice genome. The transcripts of a rice GDHPS were expressed in leaves and roots but not detected in callus tissues. The transcription level of GDHPS is much higher in leaves indicating enormous chloroplast development than roots. Genomic DNA clones for asparaginase genes were screened from the rice genomic library by using plaque hybridization technique. Twelve different genomic clones were isolated from first and second screening, and 8 of 12 clones were analyzed by restriction patterns and identified by Southern Blotting, Restriction enzyme digestion patterns and Southern blot analysis of 8 clones show the different pattern for asparaginase gene. Genomic Southern blot analysis from rice were done. It is estimated that rice has at least 2-3 copy of asparaginase gene. One of 8 positive clones was subcloned into the pBluescript SK(+) vector, and was constructed the physical map. For transformation of lysine rich storage protein into tobacco, soybean glycinin genes are transformed into tobacco. To examine whether glycinin could be stably accumulated in endosperm tissue, the glycinin cDNA was transcriptionally fused to an endosperm-specific promotor of the rice storage protein glutelin gene and then introduced into tobacco genomic via Agrobacterium-mediated transformation. Consequently the glycinin gene was expressed in a seed-and developmentally-specific manner in transgenic tobacco seeds. Glycinin were targeted to vacuole-derived protein bodies in the endosperm tissue and highly accumulated in the matrix region of many transgenic plant (1-4% of total seed proteins). Synthesized glycinin was processed into mature form, and assembled into a hexamer in a similar manner as the glycinin in soybean seed. Modified glycinin, in which 4 contiguous methionine residues were inserted at the variable regions corresponding to the C - teminal regions of the acidic and basic polypeptides, were also found to be accumulated similarly as in the normal glycinin. There was no apparent difference in the expression level, processing and targeting to protein bodies, or accumulation level between normal and modified glycinin. glycinin.