• Journal of the Korean Ceramic Society
• /
• 제43권10호
• /
• pp.646-652
• /
• 2006

Several oxynitride glasses were fabricated by means of adding $Si_3N_4$ powders as nitrogen source to Ca-Al-Si-O-N (CAS) and Mg-Al-Si-O-N (MAS) glass powders, and heat-treated in graphite crucible at 1600$^{\circ}C$ for 1 h. The physical and mechanical properties as well as impact resistance were generally increased and compared with each other. The impact resistance properties of those manufactured glasses were evaluated by DOP (depth of penetration) method which is a way to analyze armor materials. There were two means to be used herein; the copper jet impacted at hyper velocity by exploding K2l5 warhead and tungsten heavy alloy (WHA) impact bar at high velocity by firing in 30 mm solid propellent gun. The impact resistance properties against copper jet were increased and then decreased with increasing nitrogen content, while those against WHA bar were not changed apparently with nitrogen content.

• Journal of the Korean Ceramic Society
• /
• 제27권8호
• /
• pp.979-990
• /
• 1990

The possible use of bioglass as implant materials is due to its biocompatibility to human body. Even if many animal studies for the bioglasses have been performed, their structures and physical properties are not fully understood. In the present work, several investigations such as Raman spectroscopic analysis, density, thermal expansion coefficient, softening temperature, and refractive index measurement were carried out to find the structures and physical properties of bioglasses, where MgO is substituted for CaO in bioglass composition (46.1%SiO2, 24.4%Na2O, 26.9%CaO, 2.6%P2O5 ; mole%). Hydroxyapatite formation on the glass surface reacted in Tris-buffer solution was also examined. When CaO was replaced by MgO, nonbridging oxygen in glass structuer was diminished but the degree of disorder increased. Thermal expansion and softening properties showed the mixed oxide effect. Hydroxyapatite were formed on the surface of 0~11mole% of MgO containing bioglasses, and the thickness of SiO2-rich layer as well as hydroxyapatite layer were unchanged with MgO content. However, the hydroxyapatite was not formed on the surface of the bioglasses containing over 11 mole percent MgO, even if the glasses were reacted for long period.

• Journal of the Korean Ceramic Society
• /
• 제46권5호
• /
• pp.488-492
• /
• 2009

Porous frit-bonded SiC ceramics were successfully prepared at a temperature as low as $800^{\circ}C$ from SiC, frit, and microbeads (glass or polymer). The effects of SiC starting particle size and microbead addition on microstructure, porosity, and flexural strength were investigated. The addition of hollow glass microbead improved the strength of frit-bonded SiC ceramics without the loss of porosity by acting additional binder phase between SiC grains. The 65 ${\mu}m$-sized SiC resulted in lower porosity and higher strength than 50 ${\mu}m$-sized SiC because of higher packing density. Typical flexural strengths of frit-bonded SiC were 23 MPa at 46% porosity and 19 MPa at 49% porosity.

• Journal of the Korean Ceramic Society
• /
• 제54권5호
• /
• pp.406-412
• /
• 2017

$70V_2O_5-10Fe_2O_3-13P_2O_5-7B_2O_3$ glasses were prepared to study the electrical conductivity and catalytic properties of the structural change with crystallization. The structural changes were analyzed by determining the molecular volume from the sample density; using X-Ray Diffraction (XRD) analysis, which indicated that $V_2O_5$, $VO_2$ and $B_2O_3$ crystals in heat-treated more than 1h samples. Especially a new crystalline phase of non-stoichiometric $Fe_{0.12}V_2O_5$ was formed after 6 h heat treatment. The V-O bonding change after crystallization was analyzed by Fourier Transform Infrared Spectroscopy (FTIR); V ion change from $V^{5+}$ to $V^{4+}$ was shown by XPS. Conductivity and catalytic properties were examined based on the polaronic hopping of V and Fe ions, which exhibited different valence states with crystallization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.304-304
• /
• 2008

최근 이동통신의 사업의 발달로 인하여 제품의 고속신호 전달에 대한 관심이 부각되고 있다. 이로 인해 고집적 LTCC 모듈로 제작이 가능하고 고속신호 전달이 용이한 저유전율과 낮은 loss특성을 요구하는 소재 개발의 지속적인 연구를 필요로 한다. 지금까지의 ceramic/glass composite에서 주로 사용된 ceramic filler는 $Al_2O_3$로 낮은 유전율을 구현하는데 한계가 있었다. Cordierite는 낮은 유전율(${\varepsilon}r$ < 4)을 나타내는 filler로서 저유전율 기판소재로 사용될 가능성이 높지만 아직까지 보고된 결과들이 미흡한 실정이다. 선행 연구에서 cordierite filler와 $SiO_2-B_2O_3-Al_2O_3$-RO (R Zn, Sr, Ba, Ca)계의 glass를 혼합하여 LTCC 용 기판소재로서의 가능성을 확인한 결과 5.0~5.5 의 낮은 유전율과 1,000~1,500의 Q를 나타내는 것을 확인 하였다. 하지만 sheet로 제작 시 $B_2O_3$ 계로 인해 볼밀 공정에서 슬러리를 응집시켜 점도를 증가(gelation)시키는 현상이 발생하였다. 이를 개선하기 위한 glass 조성의 $B_2O_3$ 함량을 5%줄여 만든 glass를 이용해 미세구조, 유전율과 Q 그리고 강도를 측정하였다.

• Journal of the Korean Ceramic Society
• /
• 제40권3호
• /
• pp.229-233
• /
• 2003

By using an oxynitride glass as a sintering additive, the effects of BN content on microstructure and mechanical properties of the hot-pressed and subsequently annealed SiC-BN composites were investigated. The microstructures developed were analyzed by image analysis. The morphology of SiC grains was strongly dependent on BN content in the starting composition. The aspect ratio of SiC decreases with increasing BN content and the average diameter of SiC shows a maximum at 5 wt% BN and decreases with increasing BN content in the starting powder. The fracture toughness increased with increasing BN content while the strength decreased with increasing BN content. The strength and fracture toughness of SiC or SiC-TiC composites were strongly dependent on the morphology of SiC grains, but the strength and fracture toughness of SiC-BN composites were strongly dependent on BN content rather than morphology of SiC grains. These results suggest that fracture toughness of SiC ceramics can be tailored by manipulating BN content in the starting composition. Typical fracture toughness and strength of SiC-10 wt% BN composites were 8 MPa$.$m$\^$1/2/ and 445 MPa, respectively.

• Journal of the Korean Ceramic Society
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.

• Journal of the Korean Ceramic Society
• /
• 제37권11호
• /
• pp.1105-1113
• /
• 2000

Bioglass 조성 중 45S5 (46.1SiO$_2$.24.4$Na_2$O.26.9CaO.2.6P$_2$O$_{5}$ : 몰비)를 기본 조성으로 하여 46P4 (46.2SiO$_2$.49.5CaO.4.3P$_2$O$_{5}$ : 몰비), 46SF (46.1SiO$_2$24.4$Na_2$O.16.1CaO.2.6P$_2$O$_{5}$.10.8CaF : 몰비) 그리고 55SF (55.1SiO$_2$.9.2$Na_2$O.27.8CaO.3.4P$_2$O$_{5}$.4.5CaF : 몰비)를 제조하여 tris-완충용액 및 유사 생체용액(simulated body fluid)에서 반응시킨 후 생체활성유리의 표면에 생성되는 아파타이트 결정형에 관하여 연구하였다. 45S5 유리를 tris-완충용액에 반응시켰을 경우 6시간 반응시부터 수산화 아파타이트가 생성되었으나 유사 생체용액에 반응시켰을 경우에는 24시간까지도 수산화 아파타이트 결정이 생성되지 못하고 비정질 상태의 칼슘 인산염만 형성되었다. tris-완충용액에 각 조성의 유리를 200시간 반응시킨 경우 불소를 함유하지 않은 유리에서는 잎사귀 모양의 수산화 아파타이트가, 불소를 함유한 유리에서는 구상의 플루오르 아파타이트가 형성되었다. 그러나 유사 생체용액에 각 조성의 유리를 200시간 반응시켰을 경우 불소를 함유하지 않은 유리에서는 누에고치형의 수산화 아파타이트가 형성되었고 불소를 함유한 유리에서는 무정형의 칼슘 인산염이 생성되었다.

• Journal of the Korean Ceramic Society
• /
• 제27권5호
• /
• pp.583-588
• /
• 1990

Glass films in the binary system B2O3-SiO2 and Al2O3-SiO2 were prepared on soda-lime-silica slide glass by the dip-coating technique from TEOS and boric acid or aluminum nitrate. Thickness of the films varying with viscosity and withdrawal speed were measured and effect of composition and firing temperature on the properties such as transmittance and refractive index were investigated. nM2O3.(100-n)SiO2(M=B or Al) films containing up to 20mol% B2O3 and 40mol% Al2O3 were transparent. Maximum transmittance at visible range were obtained for the sample containing 15mol% Ba2O3 and 32.5mol% Al2O3 and heat-treated at 50$0^{\circ}C$, respectively. Refractive index of the film containing 15mol% B2O3 was mininum in the B2O3-SiO2 binary system and minimal refractive index was appeared at the film containing 32.5mol% Al2O3. In IP spectra, addition of B2O3 were increased absorption peak intensity of B-O and Si-O-B bond and addition of Al2O3 were decreased absorption peak intensity of Si-O bond, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• 제6권1호
• /
• pp.51-58
• /
• 1999

The effects of glass composition on the wettability and reactivity with $ZrO_2$substrate was evaluated and fabrication variables and glass compositions was investigated. Various glass compositions was investigated. Alkaline earth silicate glass show good wettability and lower viscosity and crystallization of glass could be prevented by $B_2O_3$.The sealant glass begin to wet on $ZrO_2$substrate below $900^{\circ}C$ and porosity occurred in various glass compositions, the crystallization and porosity in the glass could be prevented by the addition of flux into glass composition. But flowability and reactivity of glass with $ZrO_2$substrate was enhanced. Processing variables should be optimized to reduce the porosity by enhancing the sintering of glass powder. Many silicate glasses were investigated for the applications of high temperature sealants. Wetting and bonding of glass was good enough to seal together between $ZrO_2$and other ceramic components of SOFC. But porosity and reaction layer were occurred in the sealant glass. It will be possible to produce glass sealant without porosity and reaction layer at the interface by optimization of processing variable and modify the glass compositions. In present study, wettability of glass-filler composite was investigated. The porosity, shape of filler and interfacial reactions of sealant glass with fillers were examined.