• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.1-5
• /
• 2007

Fining and homogenization of melts during batch melting is closely related to the redox reaction of polyvalent element M (M: Sb, As etc), $M^{(x+n)+}+n/2O^{2-}{\rightarrow}M^{x+}+n/4O_2$. In this study, square wave voltammetry (SWV) measurements were performed to examine the redox behavior of an antimony ion in cathode ray tube (CRT) glass melts. According to results, well-separated two peaks are shown at low temperature while only one peak is shown at high temperature in voltammograms, which reveals that redox reaction of antimony consist of two steps: $Sb^{5+}/Sb^{3+}\;and\;Sb^{3+}/Sb^0$, depending on the temperature. Based on the peak potential shown in the voltammogram, the thermodynamic data and the redox ratio for two redox couple were determined.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.32-36
• /
• 2007

Zinc gallate $(ZnGa_2O_4)$ thin film phosphors have been formed on ITO glass substrates by a sol-gel spinning coating method. For the formation of the film phosphors, the starting materials of zinc acetate dihydrate, gallium nitrate hydrate and 2-methoxyethanol as a solution were used. The thin films deposited were firstly dried at $100^{\circ}C$ and fired at $500^{\circ}C\;or\;600^{\circ}C$ for 30 min and then, annealed $500^{\circ}C\;or\;600^{\circ}C$ at for 30 min under an annealing atmosphere of 3% $H_2/Ar$. The thin films deposited on ITO glass plates showed the (220), (222), (400), (422), (511), and (440) peaks of spinel structure as well as the (311) peak indicating a standard powder diffraction pattern. The surface morphologies of the thin film phosphors were observed with a firing and an annealing condition. The $ZnGa_2O_4$ film phosphors showed the blue emission spectra around 410 nm as well as the emission spectra in the UV region (360-380 nm).

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.86-93
• /
• 2011

Transparent plasma display can be realized by developing the synthetic chemistry of appropriate nanophosphors and generating nanophosphor-based transparent luminescent layers. For this goal, red-emitting $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphors were synthesized by a facile hydrothermal route at $200^{\circ}C$ for 48 h and the resulting nanophosphors were subsequently annealed at $800^{\circ}C$ at an ambient atmosphere. The crystallographic structure, morphology, and emission property of the as-synthesized and annealed nanophosphors were compared. Choosing 2-methoxyethanol as a dispersion medium and applying a standard sonication, well-dispersed nanophosphor solutions could be prepared. Using these dispersions, visible transparent nanophosphor layers were spin-deposited on glass substrates. By combining $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphor layer/glass substrate as a rear plate with a front plate used in a conventional plasma display panels (PDPs), mini-sized transparent red-emitting PDPs were constructed. Transmittance and luminance properties of two transparent test panels using as-synthesized versus $800^{\circ}C$-annealed nanophosphors were characterized and compared.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1014-1020
• /
• 2003

We have developed the ultrasonic polishing system to get super finishing that consist of machine part that can rotate and travel the main shaft with power 1.5kW, ultrasonic generator with frequency 20kHz. By using this system we were investigated the characteristics of ultrasonic polishing and deduced the major facters which affect the surface roughness by the experimental plans for three different materials such as ceramic, glass, and wafer, and so could be obtained following results. We could be obtained the excellent surface for hard-to-difficult cutting materials. The rotating speed could be found to be major factor influencing the surface roughness. In the case of ceramic and wafer, we were able to obtain good surface roughness when the feed rate and ultrasonic output is higher. In the case of glass, the surface roughness becames worse when ultrasonic output is higher because of increasing of load affacting on the particles in slurry.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.605-609
• /
• 2001

Low density ceramic supporter was prepared by using fly ash as a starting material for the application to the biological aerated filter (BAF) system, and the effect of additives and sintering atmosphere on the apparent and bulk density of the carrier was examined. Borax, Na$_2$O and glass powders were added to produce liquid phase. The density of the supporter decreased as the amount of borax increased. The bulk density of 0.79 g/㎤ and the apparent density of 1.10 g/㎤ were obtained when the fly ash with 15% of borax was sintered at 116$0^{\circ}C$ for 15 minutes. The density also decreased as the plate glass powders past through 22${\mu}{\textrm}{m}$ size were mixed. When the fly ash with 12% of grass powder was sintered at 128$0^{\circ}C$ for 10 minutes, the bulk and apparent density were 0.90g/㎤ and 1.00 g/㎤, respectively. Apparent density of 1.6~1.8g/㎤ was obtained when the fly ash was sintered at 120$0^{\circ}C$ in a weak reducing atmosphere. By maintaining the reducing atmosphere and sintering at a high heating rate, the liquid phase was farmed from the reduced composition of fly ash. This resulted in the formation of closed pores that enabled the low apparent density.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1204-1211
• /
• 2000

Mn-Zn 페라이트 소결체와 SiO$_2$-PbO-ZnO 삼성분계 유리와의 계면반응에서 페라이트와 유리에 각각 첨가된 ZnO가 계면반응에 미치는 영향을 조사하였다. SiO$_2$-PbO-ZnO 삼성분계 유리에 첨가된 ZnO 함량이 낮은 경우 페라이트와의 접합계면에서 생성되는 중간상은 Pb$_2$(Mn,Fe)$_2$Si$_2$O$_{9}$와 Pb$_{8}$(Mn,Fe)Si$_{6}$O$_{21}$의 고용체였으며, ZnO 농도가 증가함에 따라 중간상은 사라졌다. 유리속의 ZnO 성분이 증가함에 따라 페라이트 소결체 쪽의 계면부근에 Zn의 농도가 증가하는 특이한 분포가 나타났다. 이는 유리 속에 첨가된 Zn 이온의 높은 활동도로 인해 페라이트에 포함된 Zn 이온의 용해반응이 선택적으로 억제되어 나타난 것으로 생각된다. 페라이트에 첨가된 ZnO 함량이 낮은 경우 SiO$_2$-PbO 이성분계 유리와의 접합계면에서 페라이트의 용해에 따른 침식과 입계를 통한 유리의 침투가 심하게 일어났으며, ZnO 함량이 증가함에 따라 계면을 통한 상호확산과 반응이 억제되었다.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.250-254
• /
• 1983

The effects of the various amount of $CeO_2$ $MnO_2$ and $Fe_2O_3$ added to the high lead-silicate glasses on the X-ray induced coloration were studied. The light transmissions and chromaticities of the glasses before and after exposing to X-ray radiation were measured to investigate the effects by additivies. The results are as follows ; 1. High lead-silicate glass added $CeO_2$ or $MnO_2$ has a little effect on the transmission but has a considerable effect on the chromaticity. The chromaticies of 56.6wt% PbO content glasses were changed as 3-7 times as those of 28.3wt% PbO content glasses. 2. By the X-ray irradiation glasses containing 0.2-0.5wt% $CeO_2$ were changed the least in chromaticity that is the most effective in preventing the X-ray induced coloration. 3. By X-ray irradiation $MnO_2$ reduced the transmissions and showed purple coloration. 4. Transmission change amounts of the glasses added $CeO_2$ and $Fe_2O_3$ were less than those of the glasses added $CeO_2$ alone by X-ray irradiation.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.569-574
• /
• 2006

Transparent glass-ceramics containing fresnoite crystals have been prepared by controlled heat treatment in $K_2O-BaO-TiO_2-SiO_2$ and their nonlinear optical and luminescent properties were investigated using Maker fringe method and Spectrofluorometer. The second harmonic generation was observed in all samples and the values decreased with increasing $K_2O$ content. The luminescence of blue light at ${\sim}482nm$ could be observed and it was shown that the luminescent property was controlled by the $K_2O$ content.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.532-536
• /
• 2006

The annealing temperature effect of transparent conducting oxide film grown on glass substrate for solar cell application was studied in this paper. Using pulsed DC magnetron sputtering with 1 at% Al-doped ZnO target, TCO films were deposited on coming 7059 glass at room temperature. Al:ZnO thin films were annealed at 200, 400, Al $600^{\circ}C$ for 10 min and annealing resulted in lower biaxial compressive stress of about 1GPa and increased average crystallite size in all films. The as-grown film shows the resistivity of $1{\times}10^{-2}{\Omega}{\cdot}cm$ and transmittance under 80%, whereas the electrical and optical properties of film annealed at $400^{\circ}C$ are enhanced up to $5{\times}10^{-4}{\Omega}{\cdot}cm$ and 85%, respectively.

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.438-445
• /
• 2001

600 W의 마이크로파 출력 하에서 PbO, V$_2$O$_{5}$, TeO$_2$ 및 V$_2$O$_{5}$-PbO-TeO$_2$성분들의 마이크로파 발열 특성을 조사하였다. V$_2$O$_{5}$ 성분의 높은 마이크로파 흡수능에 기인하여 V$_2$O$_{5}$-PbO-TeO$_2$유리상 시편들은 마이크로파를 흡수하여 주어진 온도까지 직접 가열되었다. XRD, OM, SEM 및 고전압 발생 측정기를 통하여 재래식 열 및 마이크로파 공정에서 열처리된 시편들의 결정화 및 전기 전도도의 특성을 비교 조사하였다. PbV$_2$O$_{6}$ 및 Pb$_4$V$_2$O$_{9}$ 결정상들이 마이크로파 열처리된 시편에서는 존재하였다. 그러나, 재래식 열처리된 시편들에서는 존재하지 않는다는 것을 확인하였고, 재래식 열처리된 시편들에 비하여 마이크로파 열처리된 시편들의 전기 전도도 값이 상대적으로 높았다.