• 제목/요약/키워드: Ceramic products

검색결과 379건 처리시간 0.03초

분산액에서의 Copper Chromite 합성 및 Methyl Dodecanoate의 수소화반응 (Hydrogenation of Methyl Dodecanoate Using Copper Chromite)

  • 강호철;이상훈;박종목;김동표;이병민
    • 공업화학
    • /
    • 제20권2호
    • /
    • pp.201-207
    • /
    • 2009
  • Dodecanol 합성을 위한 methyl dodecanoate의 수소화반응을 위하여 copper chromite를 세라믹법, 공침법 및 개량된 공침법으로 합성하였다. 입자의 형상은 SEM 및 XRD로 확인하였으며 수소화 반응후 얻어진 생성물은 GC, GC/MSD 및 NMR로 분석하였다. 합성된 입자는 (1) 3.2에서 $7.0{\mu}m$ 크기의 구형형태(세라믹법), (2) 50에서 500 nm 크기의 구형이 혼재한 판형태(공침법) 및 (3) 작고 균일한 구형형태(개량된 공침법)를 보였다. 입자의 크기를 제어하기 위하여 PEG, Span 80 및 polyacrylate등 다양한 분산제 용액에서 copper chromite를 합성하였다. PEG (Mw = 4000) 수용액에서 합성한 입자가 30~50 nm 크기로 가장 작고 균일하였으며, $280^{\circ}C$ 및 100 atm에서 촉매의 반응성을 테스트한 결과, dodecanol의 수율은 79.9%로 얻어졌다. 수소화반응에서 촉매의 반응성은 촉매의 크기가 작고 균일할수록 높아지는 경향을 보였다. 최적화된 반응조건인 $280^{\circ}C$ 및 240 atm에서 dodecanol의 수율은 95.5%였다.

Part I Advantages re Applications of Slab type YAG Laser PartII R&D status of All Solid-State Laser in JAPAN

  • Iehisa, Nobuaki
    • 한국레이저가공학회:학술대회논문집
    • /
    • 한국레이저가공학회 1998년도 추계학술발표대회 초록개요집
    • /
    • pp.0-0
    • /
    • 1998
  • -Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30%, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

  • PDF

SiC 및 흑연 혼입 모르타르의 전자파 차폐 성능 평가 (Evaluation of Electromagnetic Shielding Performance of SiC and Graphite Mixed Mortar)

  • 박오성;조형규
    • 한국건축시공학회지
    • /
    • 제21권5호
    • /
    • pp.459-468
    • /
    • 2021
  • 건축물의 외벽 등에서 전자파를 차단하게 되면 건축물 안의 전자기장의 강도를 효과적으로 감소하게 되어 전자파 장해의 감쇠를 가져오므로 이에 대한 기술 개발에 관심이 크다. 본 연구에서는 반도체 분야에서 발생되는 SiC 부산물과 흑연을 선정하였고 분쇄 등 전처리 후 모르타르에 혼입하여 물성 및 전자파 차폐 성능을 평가하였다. 각 차폐 소재의 경제성을 고려하여 실험체 최외측 10% 부피만 각각의 차폐 소재를 혼입하여 차폐 성능을 평가하였고 차폐 효과 평가식을 활용하여 실험체 전체 부피에 차폐 소재를 혼입한 실험체를 제작할 경우 차폐 성능을 예측하였다. 실험 결과, SiC 알갱이 형태의 차폐 소재 혼입 시차폐 성능은 최대 20dB, 흑연 분말을 차폐 소재로 혼입 시 차폐 성능은 최대 18dB, SiC 분말을 차폐 소재로 혼입 시 차폐 성능은 최대 28dB로 예측 되었고 99.9%의 차폐율을 갖는 것으로 알려진 30dB에 근접한 우수한 차폐 성능을 가지는 것을 확인하였다.

Ni0.5Co0.5Fe2O4의 수소환원에 의한 나노구조 Fe-Ni-Co 합금의 제조 및 자성특성 (Synthesis and Magnetic Property of Nanocrystalline Fe-Ni-Co Alloys during Hydrogen Reduction of Ni0.5Co0.5Fe2O4)

  • 백민규;도경효;;박종진
    • 대한금속재료학회지
    • /
    • 제49권2호
    • /
    • pp.167-173
    • /
    • 2011
  • Nickel cobalt ferrite($Ni_{0.5}Co_{0.5}Fe_2O_4$) powder was prepared through the ceramic route by the calcination of a stoichiometric mixture of NiO, CoO and $Fe_2O_3$ at $1100^{\circ}C$. The pressed pellets of $Ni_{0.5}Co_{0.5}Fe_2O_4$ were isothermally reduced in pure hydrogen at $800{\sim}1100^{\circ}C$. Based on the thermogravimetric analysis, the reduction behavior and the kinetic reaction mechanisms of the synthesized ferrite were studied. The initial ferrite powder and the various reduction products were characterized by X-ray diffraction, scanning electron microscopy, reflected light microscope and vibrating sample magnetometer to reveal the effect of hydrogen reduction on the composition, microstructure and magnetic properties of the produced Fe-Ni-Co alloy. The arrhenius equation with the approved mathematical formulations for the gas solid reaction was applied to calculate the activation energy($E_a$) and detect the controlling reaction mechanisms. In the initial stage of hydrogen reduction, the reduction rate was controlled by the gas diffusion and the interfacial chemical reaction. However, in later stages, the rate was controlled by the interfacial chemical reaction. The nature of the hydrogen reduction and the magnetic property changes for nickel cobalt ferrite were compared with the previous result for nickel ferrite. The microstructural development of the synthesized Fe-Ni-Co alloy with an increase in the reduction temperature improved its soft magnetic properties by increasing the saturation magnetization($M_s$) and by decreasing the coercivity($H_c$). The Fe-Ni-Co alloy showed higher saturation magnetization compared to Fe-Ni alloy.

국내 시판되는 16가지 연무기/압축기의 성능 평가 (Comparison of the Characteristics of 16 Commercial Nebulizer/Compressor Combinations Used in Korea)

  • 김현정;이초애;황은경;한만용;안욱성;조영민
    • Clinical and Experimental Pediatrics
    • /
    • 제46권12호
    • /
    • pp.1235-1241
    • /
    • 2003
  • 목 적 : 현재 시중에 판매되고 있는 연무기 기종에 따라 그 성능이 다를 것으로 보고 제품 선택에 도움이 되고자 국내 시판중인 16가지 연무기 기종의 성능을 실험을 통하여 비교하였다. 방 법 : 16가지 연무기/압축기 제품(Pariboy Type 38/Long life, Pariboy Type N/Long life, Pariboy Type N/Salter 8900, Pariboy Type N/LC, Devilbiss pulmoaid-LT/Hudson, Devilbiss pulmoaid/Hudson, Mesmed neb-300/Own, San-up 3040/Hudson, Midas(Basic)/Own, AirJolie2/Hudson, Thomas 1127/Salter 8900, Noel NE-2000/Salter 8900, Omron CX3/Hudson, Chang Woo CWN-100/Salter 8900, Voyage/Mefar, ASI-Pro/Medel jet pluse)을 가지고 Mass output과 입자 크기를 측정하였다. Mass output은 생리식염수 4 mL를 2분간 분무 전, 후의 무게변화를 정밀 전자저울로 측정하였다. 동일한 방법으로 생리식염수 3 mL를 채워 실험하였다. 입자의 크기는 0.9% 생리식염수 4 mL를 채우고 5분간 작동하면서 laser diffraction법을 이용하여 측정하였다. 결 과 : 분당흡입량은 Pariboy type N/Long life이 0.184 mg/min로 가장 높은 값을 보였으며 0.019 mg/min로 가장 낮은 수치를 나타낸 Mesmed Neb-300/Own과는 약 9.6배의 차이를 보였다. Pariboy Type N/Long life이 Mass output이 0.68 mg/min로 가장 컸고 0.13 mg/min으로 가장 작은 수치를 보인 Mesmed-Neb/Own과는 5.2 배 차이가 있었다. 모든 제품은 5분간의 입자의 크기를 측정하였으나 검사시간 동안 입자크기의 차이는 보이지 않았다. $5{\mu}m$ 이하의 입자크기의 최대값은 64%였고 최소값의 연무기는 20%였다. MMAD는 Pariboy Type N/Long life이 $3.76{\mu}m$로 가장 작았으며 나머지 제품은 모두 $5{\mu}m$ 이상이었다. 결 론 : 시중에 판매되는 연무기들의 기능이 다양하므로 제품의 선택에 있어서 그 성능을 고려할 필요가 있다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

뇨 성분에서의 염소 소독부산물 생성 특성 (Characteristics of Chlorination Byproducts Formation of Urinary Organic Compounds)

  • 서인숙;손희종;안욱성;유선재;배상대
    • 대한환경공학회지
    • /
    • 제30권3호
    • /
    • pp.286-292
    • /
    • 2008
  • 7종의 뇨 성분에서의 염소 소독부산물 생성 특성을 조사한 결과, kynurenine, indole 및 uracil에서 단위 DOC당 염소 소독 부산물 생성능이 비교적 높게 나타났다. Kynurenine, indole 및 uracil에 대해 Br$^-$ 첨가 유무에 따른 THMs/DOC를 조사한 결과, Kynurenine은 Br$^-$를 첨가하지 않은 경우, THMs/DOC가 86.9 $\mu$g/mg으로 나타났으며, Br$^-$를 첨가하였을 경우는 THMs/DOC는 100.8 $\mu$g/mg으로 Br$^-$를 첨가하지 않은 경우보다 높게 나타나고 있다. Indole의 경우도 Br$^-$를 첨가하지 않은 경우 보다 Br$^-$을 첨가한 경우에 THMs/DOC가 6.58 $\mu$g/mg에서 31.4 $\mu$g/mg 정도로 높아지는 것으로 조사되었다. 또한, HAAs/DOC를 조사한 결과에서도 kynurenine에서 가장 높은 생성능을 보이고 있으며, 다음으로 uracil과 indole 순으로 조사되었다. 특히, THMs의 경우와는 반대로 kynurenine과 indole에서 Br$^-$이 첨가된 경우 HAAs/DOC가 현저히 감소되는 것으로 나타나고 있다. Br$^-$를 첨가하지 않은 경우에 kynurenine과 indole에서는 생성된 HAAs의 대부분을 TCAA가 차지하고 있는 것으로 나타났으나, uracil의 경우는 DCAA의 생성능이 높은 것으로 나타났다. Br$^-$ 첨가 유무에 따른 HANs/DOC를 조사한 결과에서는 kynurenine에서의 생성능이 가장 높았고, 대부분이 DCAN으로 나타났으며, Uracil의 경우에는 염소처리에 의해 HAN은 생성되지 않았다. 또한, CH/DOC 조사결과에서는 kynurenine과 indole에서는 낮은 생성능을 보인 반면, uracil의 경우 CH/DOC가 Br$^-$를 첨가하지 않은 시료에서는 1,270 $\mu$g/mg, Br$^-$를 첨가한 시료에서는 1,027 $\mu$g/mg으로 나타나 매우 높은 반응성을 나타내고 있다. Kynurenine, indole 및 uracil에 대해 Br$^-$ 첨가 유무에 따른 THMs과 HAAs 생성능 변화를 살펴본 결과, kynurenine과 indole의 경우는 Br$^-$가 첨가되었을 경우 THMs/DOC가 높아지는 것으로 나타나고 있다. Kynurenine은 Br$^-$가 첨가되었을 경우 THMs/DOC가 큰 폭으로 증가한 것이라기보다는 HAAs/DOC가 감소되어 Br$^-$ 첨가에 따라 THMs/DOC가 큰 것으로 나타났으며, indole의 경우는 kynurenine과는 반대로 THMs/DOC가 증가하여 나타난 결과이다.

크롬 취급 사업장의 작업환경 및 근로자 폭로 실태에 관한 연구 (A Study of Working Environments and Workers Exposed to Chromium)

  • 유병철;손병철;전진호;손혜숙;한용수;이채언;정운
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권3호
    • /
    • pp.517-530
    • /
    • 1994
  • For the purpose of providing the basic data for health management of workers who are exposed to chromium and for improving the quality of working environment, the authors evaluated blood and urinary level of chromium, the occupational history. AST, ALT, Hb, Hct, nasal specular examinaton on 287 workers who have been dealed chromium compounds in 56 manufacturing Industries of five types, that is, 38 metal plating services(plating),4 manufacture of other fabricated metal products (fabricated metal product), 5 manufacturing of dyestuff(dyestuff), 6 dressing and dyeing of leather(leather), 3 others(manufacture of pottery and ceramic househod wares, motor vehicles, electronic valves and tubes and other electronic components) and also measured the level of chromium in air from February to October 1993. The results were as follows ; 1. The utilized type of chromium compounds was the hexavalent state in plating fabricated metal product dyestuff, leather and the trivalent state in .other, and atmosperic chromium concentration as geometric mean was $0.0138mg/m^3(0.001{\sim}0.068mg/m^3)$ in plating, $0.0115mg/m^3(0.006{\sim}0.015mg/m^3)$ in fabricated matal product, $0.068mg/m^3(0.002{\sim}0.019mg/m^3)$ in dyestuff, $0.0083mg/m^3(0.002{\sim}0.028mg/m^3)$ in leather $0.0039mg/m^3(0.003{\sim}0.005mg/m^3)$ in other by the type of industry and it exceeded TLV-TWA ($0.05mg/m^3$) in five (13.6%) of plating services. 2. The geometric mean of chromium in blood was $1.54{\mu}g/dl(0.10{\sim}3.62{\mu}g/dl)$ in Plantng, $0.94{\mu}g/dl(0.27{\sim}2.82{\mu}g/dl)$ in fabricated metal product, $0.51{\mu}g/dl(0.10{\sim}3.25{\mu}g/dl)$ in dyestuff, $0.87{\mu}g/dl(0.15{\sim}8.00{\mu}g/dl)$ in leather, $0.55{\mu}g/dl(0.20{\sim}2.28{\mu}g/dl)$ in other by the type of industry(p<0.001). 3. The geometric mean of chromium in urine was $14.47{\mu}g/l(6.90{\sim}28.00{\mu}g/l)$ in planting, $4.63{\mu}g/l(0.24{\sim}43.00{\mu}g/l)$ in fabricated metal product, $5.93{\mu}g/l(1.00{\sim}33.00{\mu}g/l)$ in dyestuff, $11.09{\mu}g/l(0.80{\sim}48.00{\mu}g/l)$ in leather, $12.41{\mu}g/l(10.10{\sim}41.00{\mu}g/l)$ in other by the type of industry(p<0.001). 4. As the result of nasal specular examination, twenty four cases (8.4%) of nasal septal perforation among 287 total subjects was observed, and there were 17 (9.7%) cases in plating, 4 csaes (14.3%) in dressing and dyeing of leather. In the comparison of chromium concentration in blood and urine between the perforated group and non-perforated group, the perforated group showed a significantly higher value as $1.883{\pm}3.055{\mu}g/dl\;and\;0.793{\pm}0.815{\mu}g/dl$(P<0.001), $21.31{\pm}34.610{\mu}g/L\;and\;9.304{\pm}11.079{\mu}g/L$ (P<0.001). 5. The mean concentration of chromium in blood, urine and the mean level of AST, ALT, Hb and Hct in exposure group were higher than those of control group(p<0.001).

  • PDF

15세기 초반 경상도 상주목 일대 화기(花器)의 감조(監造) 배경과 견양(見樣)으로서의 의미 (The Influence and Implications of Flower Vessels (花器) Supervised Process of Production During the Joseon Dynasty in the Early 15th Century)

  • 오영인
    • 헤리티지:역사와 과학
    • /
    • 제52권3호
    • /
    • pp.112-129
    • /
    • 2019
  • 본 논문은 1411년 감조된 화기의 실체에 주목하여 화기가 감조된 배경과 견양으로서의 의미에 대한 규명을 시도한 글이다. 이를 위해 상림원에 진공된 화기의 용도와 성격 규명을 필두로 "세종실록" "지리지"와 "경상도지리지", 상주 일대 자기 가마터의 실물자료에 주목하여 화기의 종류와 제작 양상을 유추하였다. 또한 조선시대 화기의 제작 시점을 추정하고, 화기의 제작에 관여한 조선 왕실의 상황과 의중을 밝히며 이후 화기 제작에 미친 영향을 살펴보았다. 15세기 초반 조선 왕실은 관제를 개편하고 예제를 정비하려는 노력을 기울였다. 왕실과 관련한 건축물이나 구조물 축조, 의례 절차 및 준비에 별도 감독관을 두어 관여하였고, 제기와 무기 제작 시 별도의 감조를 명하였다. 1411년 화기가 감조의 대상으로 선택되었다는 사실은 이러한 노력의 일환이자, 왕조가 지향하는 이념에 적합한 대상으로 화기가 받아들여졌음을 의미한다. 그 결과 화기의 제작은 자기소가 군집하였던 상주목에서 1411년의 감조를 기점으로 본격화되어 상림원에 진공될 화기로 분청사기상감화분 및 청자화분받침이 제작되었다. 15세기 중반 가마를 비롯해 관요에서는 상주목 일대에서 제작된 화기와 매우 흡사한 예가 제작되었다. 즉 1411년 감조된 화기가 이후 견양으로서 지대한 영향을 미쳤음을 보여주는 대목이다. 당시 조선 왕실은 명 황실로부터 전해 받은 기물을 그대로 견양으로 삼거나, 별도 제작한 그림이나 실물을 검토하여 견양을 정하였고, 이를 전국 각지에 보내어 제작의 범으로 삼도록 하였다. 일찍이 견양은 자기 제기 제작에 영향을 미쳤고, 매년 사옹원 관원이 어용 자기를 감조하였을 뿐만 아니라 '견양'이 자기의 명문으로 별도 표기되기도 하였다. 당시 이러한 여건 하에서 1411년 내수에 의해 감조된 화기 또한 정밀한 제작 규범을 제시한 화기의 견양으로 평가된다.