• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.739-749
• /
• 1991

Calcium hydroxide fine powders were synthesized by hydration of calcium oxide, and the shapes of powders obtained were examined for each synthethic condition. When distilled water was used as a solvent, irregular and agglomerated submicron powders were obtained, and it was impossible to control of the shapes. In methanol-added solutions, hexagonal plate-like particles were obtained, but addition of ethanol had no effect. However on the occasion that substituted ethylene glycol for ethanol of 5 vol%, hexagonal plate-like powders were obtained. The shapes of powders synthesized in acetic acid and salicylic acid solutions were hexagonal platelike, and were spherical and very fine in citric acid and oxalic acid solutions, respectively. But in some solutions, calcium salts were precipitated by the reaction between calcium and acid added. And the size of powders were very fine using ultrasonic vibration instead of mechanical agitation.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.532-538
• /
• 1989

The properties and sinterabilities of the ZrO2-3m/oY2O3 powders prepared by coprecipitation were investigated. The specific surface area and the total proe volume were decreased with the increasing pH of the sediments. The partially stabilized zirconia powders were fine powders with high specific surface area. The powders prepared by freeze drying method showed low tendency for agglomeration, and the powders obtained from spray drying method showed fine powders and narrow pore size distribution. At 140$0^{\circ}C$, their relative densities were up to 96%.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.625-631
• /
• 2000

In this study, the characteristics and sinterablities of TiO2 powders which were fabricated on sol-gel process and supercritical fluid process were examined. The powders fabricated on sol-gel process were amorphous. The particle size and shape were changed with the amount of water used for hydrolysis of titanium ethoxide. The powders were changed from amorphous to crystalline by heating at 400℃. The crystalline anatase TiO2 powders were directly prepared in ethanol supercritical fluid condition that temperature was 270±3℃ and pressure was 7.3 MPa. It's primary crystalline size was 20 nm and agglomerated as spherical shape whose size was 0.7∼1㎛. The powders prepared on sol-gel process were not sintered densely at 900℃ because of abnormal grain growth. However, the powders which prepared on supercritical fluid process were sintered densely at the comparatively low temperature of 800℃ by ideal growth of grain, which are fired at 900℃.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.857-863
• /
• 1998

MLCC(Multilayer ceramic capacitor) 등의 전자 세라믹스 분야에서 폭넓게 이용되는 BaTiO3 분말 제조를 위해 GNP(Glycine-Nitrate process)법을 이용하였다. 일반적인 GNP법과는 달리 출발물질로 카보네이트와 알콕사이드를 도입했고, 연소반응의 산화제 및 출발물질의 용매로써 질산을 사용하였으며, 연소합성시의 연료인 글리신의 첨가량을 달리하여 분말을 합성하였다. 연소합성된 분말의 특성은 helium pycnometer, XRD, N2 흡착을 이용한 BET, 주사전자현미경 등으로 분석하였다. 제조된 전구체 분말은 100$0^{\circ}C$로 하소시에 단일상의 BaTiO3 상으로 전이되었으며, 조성이 1.2인 경우 24m2/g의 높은 비표면적 값을 나타내었다.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.337-345
• /
• 1994

The reaction-sintered alumina and zirconia-alumina ceramics having low firing shrinkage were prepared from the Al/Al2O3 or Al/ZrO2(Ca-PSZ) powder mixtures via the attrition milling. And in this milling process the effect of the characteristics of used powders was investigated. Attrition milling was much more effective in reducing the particle size of ceramic/metal mixed powders than ball milling. Powder mixtures of flake-type Al with coarse alumina was much more effectively comminuted by the attrition milling than the mixtures of globular-type Al with coarse alumina powders. And coarse alumina than fine alumina was much more beneficial in cutting and reducing the ductile Al particles. In the contrary to Al/Al2O3 powder mixtures, Al/ZrO2 powder mixtures was not effectively comminutd. But whether using the alumina ball media or attrition milled with Al2O3 powder rather than Al, the milling efficiency was much more increased.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.336-340
• /
• 2002

Pure and nano-sized $TiO_2$ and $CaTiO_3$ powders were fabricated by a polymeric steric entrapment route and planetary milling process. An ethylene glycol was used as a polymeric carrier for the preparation of organic-inorganic precursors. Titanium isopropoxide and calcium nitrate were dissolved in liquid-type ethylene glycol without any precipitation. At the optimum amount of the polymer, the metal cations were dispersed in solution and a homogeneous polymeric network was formed. The dried precursor ceramic gels were turned to porous powders through calcination process. The porous powders were crystallized at low temperatures and the crystalline powders were planetary milled to nano size.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1113-1118
• /
• 2002

마이크로파 유전체용 $(Pb_{0.5}Ca_{0.5})(Fe_{0.5}Nb_{0.5})O_3$ (PCFN) 나노 분말을 metal-citrate 공정을 이용하여 합성하였다. 금속 이온들과 유기 조직의 결합으로 이루어진 고분자 전구체를 형성시키고 이를 열처리하여 화학양론적 조성과 균일한 크기 분포를 갖는 PCFN 분말을 성공적으로 합성하였다. 초기 비정질상 PCFN 분말은 약 $400{\circ}$에서부터 결정화가 시작되어 $700{\circ}$에서 완전한 결정화를 이루었고, $900{\circ}$ 이상에서는 PbO의 해리로 인한 pyrochlore상이 생성되었다. $700{\circ}$에서 열처리된 단일상의 perovskite PCFN 분말은 약 40 nm의 평균 크기와 균일한 형상으로 분포되어 있었다.

• 한국결정성장학회지
• /
• 제23권6호
• /
• pp.309-313
• /
• 2013

실리콘카바이드(SiC)는 높은융점과 내마모성 및 열전도 특성으로 산업적으로 널리 활용되고 있다. 특히 고순도 SiC는 고효율 전력 변환용 SiC 반도체 및 LED 공정에 적용되는 미래소재로 각광받고 있다. 본 연구에서는 고순도 SiC를 합성하기 위한 원료인 고순도 카본(C)을 유도 열플라즈마(RF Inductively thermal plasma)를 이용하여 합성하였으며, 출발원료로서 탄화수소계 액상물질인 도데칸이 사용되었다. 유도 열플라즈마 합성된 고순도 카본은 반응관과 필터에서 포집되며, 필터에서 포집된 카본 분말은 반응관에서 포집된 카본 분말보다 작은 입도(10~20 nm)와 낮은 결정성을 갖는 것으로 확인하였다. 반응관과 필터부에서 포집된 카본 분말의 순도는 각각 99.9997 %(5N7)와 99.9993 %(5N3)로 측정되었으며, 카본 분말에서 검출되는 불순물은 열플라즈마 합성장비에서 기인한 것으로 확인되었다.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.411-419
• /
• 1993

A process for the preparation of cobalt oxide powders was developed by the evaporaton of emulsion containing cobalt. The characteristics of powders were examined by means of DTA, X-ray diffracton, SEM, PSA. Cobalt oxide powders were produced by evaporating the emulsion prepared by mixing cobalt sulfate solution and organic phase consisted of kerosene, Span 80 and D2EHPA in the kerosene bath at 16$0^{\circ}C$, then the precursor obtained was calcined at 100$0^{\circ}C$. As the concentration of cobalt ions in the aqueous solution, Span 80 and the stirring speed increased, the mean size of cobalt oxide powders decreased and the size distribution was improved. At the volume ratio of one of the aqueous to organic phase, the finest mean size and the optimum size distribution was obtained. On the other hand the concentration of D2EHPA and liquid paraffin had little effect on the mean size as well as on the size distribution of powders.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1209-1217
• /
• 1994

Monodispersed alumina-zirconia fine powders were prepared by controlled hydrolysis of alkoxides. These powders and the sintered bodies were characterized. Aluminium alkoxide and zirconium alkoxide were dissolved into complex solvent with butanol and n-propanol, and by acetonitrile added hydrolytic solution, hydrolysis rate was controlled. The oil, as a dispersant, was added in hydrolytic solution, and then prepared powders were nano-sized and well-monodispersed. In the case of hydroxypropyl celluose (HPC) as a dispersant, it was added in complex solution with butanol and iso-propanol, sub-micrometer sized and well-monodispersed powders could be prepared. The value of relative density (R.D.) and tetragonal phase fraction of zirconia in the sintered body made by nano-meter sized powders were respectively higher than those in the case of sub-micrometer sized one.