• 한국분말재료학회지
• /
• 제28권5호
• /
• pp.381-388
• /
• 2021

Zirconia has excellent mechanical properties, such as high fracture toughness, wear resistance, and flexural strength, which make it a candidate for application in bead mills as milling media as well as a variety of components. In addition, enhanced mechanical properties can be attained by adding oxide or non-oxide dispersing particles to zirconia ceramics. In this study, the densification and mechanical properties of YSZ-TiC ceramic composites with different TiC contents and sintering temperatures are investigated. YSZ - x vol.% TiC (x=10, 20, 30) system is selected as compositions of interest. The mixed powders are sintered using hot pressing (HP) at different temperatures of 1300, 1400, and 1500℃. The densification behavior and mechanical properties of sintered ceramics, such as hardness and fracture toughness, are examined.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.124-127
• /
• 2005

Rewritable optical memory devices such as an CD-RW and DVD+RW are data storage media, which take advantage of the different optical properties in the amorphous and crystalline states of phase change materials. The switching property, structural transformation, transformation kinetics and chemical bindings of $Ge_xSb_{100-x}$($6{\le}x{\le}$34) were studied to investigate the feasibility of applying $Ge_xSb_{100-x}$ alloys in optical memory. The $Ge_xSb_{100-x}$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, inductively coupled plasma atomic emission spectrometer (ICP-AES) and atomic force microscopy (AEM). Optimum fiim composition of $Ge_xSb_{100-x}$ was studied and its minimum time fur laser induced crystallization and optical contrast fur phase transition was performed. These results might be correlated with the binding energies between Ge and Sb, and indicate that $Ge_xSb_{100-x}$ have an potential far optical memory applications.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.93-98
• /
• 2005

Rewritable optical disk is one of the essential data storage media in these days, which takes advantage of the different optical properties in the amorphous and crystalline states of phase change materials. As well known, data transfer rate is one of the most important parameter of the phase change optical disks, which is mostly limited by the crystallization speed of recording media. Therefore, we doped Sn/Bi to $Ge_2Sb_2Te_5$ alloy in order to improve the crystallization speed and investigated the dependence of phase change characteristics on Sn/Bi doping concentration. The Sn/Bi doped $Ge_2Sb_2Te_5$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, UV-visible spectrophotometer, electron probe microanalysis (EPMA), inductively coupled plasma mass spectrometer (ICP-MS) and atomic force microscopy (AFM). Optimum doping concentration of Bi and Sn were 5${\~}$6 at.$\%$ and the minimum time for crystallization was below than 20 ns. This improvement is correlated with the simple crystalline structure of Sn/Bi doped $Ge_2Sb_2Te_5$ and the reduced activation barrier arising from Sn/Bi doping. The results indicate that Sn/Bi might play an important role in the transformation kinetics of phase change materials..

• 에너지공학
• /
• 제21권4호
• /
• pp.385-392
• /
• 2012

본 연구는 현재 콘덴싱 보일러에 많이 사용하는 다공성 소재중에서 메탈화이버(metal fiber, MF) 및 세라믹(ceramic, CM)으로 제작한 평판형 버너에 대해 연소 및 열특성을 비교 검토하고 그 결과를 향후 개발할 EGR(Exhaust gas recirculation) 콘덴싱 보일러에 적용할 버너 선정의 기초자료로 활용하는 것을 목적으로 한다. CO 배출량은 CM이 MF보다 높았고 NOx 배출량은 MF가 CM보다 높게 나타났다. 버너열량 변화시에는 버너열량이 클수록 효율이 높게 나타났으며 버너 소재별 열효율은 버너열량 변화와 관계없이 MF가 CM보다 높게 나타났다. 본 실험범위에서 KS B 기준과 EN 677기준을 근거로 비례제어, 열효율, CO 및 NOx 배출량을 고려할 때 버너 소재는 MF가 적절하며 당량비는 0.8일때가 최적 운전조건으로 판단된다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.12-18
• /
• 2017

Transparent organic-inorganic hybrid hard coating films were prepared by the addition of $SiO_2$ or $ZrO_2$, as an inorganic filler to improve the hardness property, filler was highly dispersed in the acrylic resin. To improve the compatibility in the acrylic resin, $SiO_2$ or $ZrO_2$ is surface-modified using various silanes with variation of the modification time and silane content. Depending on the content and kind of the modified inorganic oxide, transparent modified inorganic sols were formulated in acryl resin. Then, the sols were bar coated and cured on PET films to investigate the optical and mechanical properties. The optimized film, which has a modified $ZrO_2$ content of 4 wt% markedly improved in terms of the hardness, haze, and transparency as compared to neat acrylate resin and acrylate resin containing modified $SiO_2$ content of 8 wt%. Meanwhile, the low transparency and high haze of these films slowly appeared at $SiO_2$ content above 10 wt% and $ZrO_2$ content of 5 wt%, but the hardness values were maintained at 2H and 3H, respectively, in comparison with the HB of neat acrylate resin.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.418-425
• /
• 2011

In this study, a high energy ball milling process was introduced in order to improve the densification of direct nitrided AlN powder. The sintering behavior and thermal conductivity of the AlN milled powder was investigated. The mixture of AlN powder and 5 wt% $Y_2O_3$ as a sintering additive was pulverized and dispersed by a bead mill with very small $ZrO_2$ bead media. The milled powders were sintered at $1700^{\circ}C-1800^{\circ}C$ for 4 h under $N_2$ atmosphere. The results showed that the sintered density was enhanced with increasing milling time due to the particle refinement as well as the increase in oxygen contents. Appropriate milling time was effective for the improvement of thermal conductivity, but the extensive millied powder formed more fractions of secondary phase during sintering, resulted in the decrease in thermal conductivity. The AlN powder milled for 10min after sintering at $1800^{\circ}C$ revealed the highest thermal conductivity, of 164W/$m{\cdot}K$ in tne densified AlN sintered at $1800^{\circ}C$.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.227-232
• /
• 2022

본 논문은 다원화하고 있는 현대 도예에 분야에서 퍼포펀스와 융합한 작품들에 주목하며 도예 퍼포먼스 작품이 담고 있는 수행적 표현과 의미를 연구 및 분석하였다. 이에 미켈 바르셀로, 요제프 나즈, 이강효, 테리 프레임, 제이제이 맥크라켄의 도예 퍼포먼스 작품들을 분석한 후 퍼포먼스의 수행성과 효과에 대하여 알아본다. 연구 결과 도예 퍼포먼스는 점토를 이용한 신체적 행위를 통해 일반적인 도예 작품에서 보여주는 표현 형식과 제작과정을 넘어서는 확장성을 보여준다. 또한 행위자의 실시간 공연으로 사건을 만들어가는 과정적 체현으로 작가와 관객이 서로 관계하는 열린 구조를 통해 기존과 다른 방식의 해석과 이해를 할 수 있게 하였다. 타 매체와의 융합적 시도는 현대 도예에서 탈경계성을 함의하며 새로운 영역으로의 확장 가능성을 보여준다. 이것으로 공예적 특성이 강한 도예 분야의 관념적 틀을 깨는 긍정적 영향을 기대한다.

• 한국융합학회논문지
• /
• 제12권4호
• /
• pp.151-159
• /
• 2021

본 연구의 목적은 수사학과 문학에서 주로 이용되었던 '아이러니'를 통해 20세기 펑크 도예 작품을 분석함으로써 융합적인 연구를 시도하는 것이다. 아이러니가 현대에 와서 학자들마다 그 분류와 정의가 서로 다르고, 위트, 유머, 역설, 풍자와의 착종현상이 심화되어가는 현상을 발견하고, 이러한 문제를 해결해서 새롭게 아이러니를 분류한 문학평론가 정끝별의 아이러니의 유형(모순형용의 아이러니, 반대진술로의 아이러니, 극적 전환의 아이러니, 시적 진술로의 아이러니)을 20세기 펑크 도예가들의 작품을 분석하기 위한 준거의 틀로 수용했다. 결과적으로 펑크 도예에서 발견되는 조형언어는 표면과 실재의 이중성이라는 아이러니의 특징과 유사한 부분이 많았고, 문학에서 보여주는 무겁고 멜랑코리한 어조보다 유머스럽고 희극적 성격이 더욱 두드러졌다. 또한 흙과 유약이라는 도예 미술의 미디어적 특성과 공예적속성이 도예 조각가들이 펑크 미술에서 주목받을 수 있는 동인이 되었음을 알 수 있었다.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.658-671
• /
• 1999

The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all-ceramic restorations. Zinc phosphate cement and glass-ionomer cement were used as an early lot-ing media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron test-ing machine, and fracture strengths resistance for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.16-23
• /
• 2009

The porous pellets were prepared from porphyry by slurry foaming method. The effect of sintering temperatures on pore structure of porous porphyry pellets with different extension ratio ($E_R$) was investigated by specific surface area, water absorption and porosity, which changed with sintering temperatures. When the sintering temperatures increased from $975^{\circ}C$ to $1075^{\circ}C$, specific surface area and water absorption of the all samples decreased. In case of the sample with an equal sintering temperature, $E_R=3.0$ pellets had little influence on pore structure compared to the $E_R=2.0$ pellets. As a results, it was shown by SEM that facilitated formation of micro pores at $E_R=2.0$ pellets shrunk increasingly after sintering process. At $E_R=3.0$ and sintering temperature at $1025^{\circ}C$, optimum conditions of the porous porphyry porous pellets was found. Also, Escherichia coli removal efficiency of the silver-containing porphoyry porous pellets was measured for the feasibility as a antibacterial media. The antibacterial activity of prepared silver-containing sample was maintained above 90% for 40 days.