• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.297-302
• /
• 2022

We investigated the origin of magnetic behaviors induced by an asymmetric spin exchange interaction in Fe-site engineered lead iron niobate [Pb(Fe_1/2Nb_1/2)O₃, PFN], which exhibits a room-temperature multiferroicity. The magnitude of spin exchange interaction was regulated by the introduced transition metals with a distinct Bohr magneton, i.e., Cr, Co, and Ni. All compositions were found to have a single-phase perovskite structure keeping their ferroelectric order except for Cr introduction. We discovered that the incorporation of each transition metal imposes a distinct magnetic behavior on the lead iron niobate system; antiferro-, hard ferro-, and soft ferromagnetism for Cr, Co, and Ni, respectively. This indicates that orbital occupancy and interatomic distance play key roles in the determination of magnetic behavior rather than the magnitude of the individual Bohr magneton. Further investigations are planned, such as X-ray absorption spectroscopy, to clarify the origin of magnetic properties in this system.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.195-214
• /
• 2000

The high-speed steel (shorten as HSS) consists of Fe and several kinds of transition metal carbides. The cutting tools or wear-resistant materials made from HSS experience relatively high thermal shock because a coolant such as water or oil is flowed over the surface of heated HSS. The purpose of this research is to increase the hardness, strength, fracture toughness and thermal shock resistance of HSS. A possible strategy is to incorporate a hard ceramic material with high strength in HSS matrix. This paper describes the processing, microstructure and mechanical properties of the oriented unidirectional mullite fiber/HSS composite. The unidirectional mullite fibers of 10${\mu}{\textrm}{m}$ diameter were dispersed by the ultrasonic irradiation of 38 kHz in an ethylenglycol suspension containing HSS powder of 11${\mu}{\textrm}{m}$ median size. The dried green composites with 4-68 vol% fibers were hot-pressed for 2h at 100$0^{\circ}C$ in Ar atmosphere under a pressure of 39 MPa. The higher density was achieved in the composite with a lower content of fibers. The oriented unidirectional fibers were well dispersed in the HSS matrix. The average distance between the center of fibers in the cross section was close to the value calculated from the fiber fraction. No reaction occurred at the interfaces between HSS and mullite fibers in the composites. The composite with 13.6 vol% fibers showed 100 MPa of four point flexural strength at room temperature. The thermal expansion of composite with heating was influenced by the orientation of mullite fibers.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.23-28
• /
• 2002

This paper describes the machining characteristics of the $MoSi_2$ based composites by electric discharge drilling with various tubular electrodes, besides, Hardness characteristics and microstructures of $Nb/MoSi_2$ laminate composites were evaluated from the variation of fabricating conditions such as preparation temperature, applied pressure and pressure holding time. $MoSi_2$ -based composites has been developed in new materials for jet engine of supersonic-speed airplanes and gas turbine for high- temperature generator. Achieving this objective may require new hard materials with high strength and high temperature-resistance. However, With the exception of grinding, traditional machining methods are not applicable to these new materials. Electric discharge machining (EDM) is a thermal process that utilizes a spark discharge to melt a conductive material, the tool electrode being almost non-unloaded, because there is no direct contact between the tool electrode and the workpiece. By combining a nonconducting ceramics with more conducting ceramic it was possible to raise the electrical conductivity. From experimental results, it was found that the lamination from Nb sheet and $MoSi_2$ powder was an excellent strategy to improve hardness characteristics of monolithic $MoSi_2$. However, interfacial reaction products like (Nb, Mo)$SiO_2$ and $Nb_2Si_3$ formed at the interface of $Nb/MoSi_2$ and increased with fabricating temperature. $MoSi_2$ composites which a hole drilling was not possible by the conventional machining process, enhanced the capacity of ED-drilling by adding $NbSi_2$ relative to that of SiC or $ZrO_2$ reinforcements.

• 헤리티지:역사와 과학
• /
• 제47권3호
• /
• pp.24-41
• /
• 2014

손곡2리 4호 가마터 출토 청자는 원주 법천사지와 근거리에 위치하고 있어 법천사지 출토 청자와의 유사성이 제기되고 있으며, 따라서 자연과학적 방법을 통해 상관성을 알아보고자 하였다. 총 19개 대상 청자에 대한 도자사적 성격을 알아보고, 과학적 분석을 진행하였다. 먼저, 과학적 분석결과 분석대상 청자 태토의 화학조성은 $RO_2$ 3.79-7.77mole, $RO+R_2O$ 0.33-0.49mole 영역에서 분산된 분포를 나타낸다. 미세구조 확인결과 실생활에 사용되었을 것으로 추정되는 원주 법천사지 출토 청자는 대부분 자화 상태가 양호하며, 손곡2리 4호 가마터 수습 청자 중에는 시유와 소성이 제대로 이루어지지 않은 청자가 일부 확인되었다. 태토의 결정상 분석결과 quartz와 mullite가 검출되었으며, 손곡2리 4호 가마터 수습 청자 중 일부에서는 corundum이 검출되었다. 분석대상 청자 대부분은 $1150{\sim}1200^{\circ}C$에서 소성되었으며, 일부 $1100^{\circ}C$ 이하 온도에서 소성된 청자와 $1200^{\circ}C$ 이상 고온에서 소성된 청자도 확인된다. 분석 결과 법천사지와 손곡2리 4호가마터 청자 태토에서 다양한 화학조성 및 제작기법이 확인되었으며, 손곡2리 4호 가마터 청자가 법천사지에서 사용된 청자의 생산가마터라고 단언하기 어렵다. 다만, 희토류 원소 분석에서는 법천사지와 손곡2리 4호 가마터 수습 일부 청자에서 일정한 규칙성을 갖는 분포 패턴을 나타내어 도자기 제작에 사용된 원료가 동일기원일 가능성을 제시한다. 도자사적으로 살펴보면, 법천사지 출토 청자와 손곡2리 4호 가마터 수습청자는 성형방법과 번조방법에서 동일한 제작기법으로 확인된다. 또한 전반적인 청자의 기형과 문양의 양상으로 봤을 때, 12~13세기에 제작된 것으로 보인다.