• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.889-894
• /
• 1996

This study was subjected to the stabilization of heavy metals using DSp cement. Heavy metal Cr and Pb ions were mixed with cement paste and hydration behavior and leaching property by heavy metal were exami-ned. It was found that, Cr ion accelerated the early hydration of the cement and has no accelerating effect in later hydration period. However Pb ion retarded the hydration of the cement for a early hydration periods. As a result of leaching test the quantity of leachant has a very low value and the influence of leached heavy metal effected on the environments is very weak.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.115-122
• /
• 2004

본 연구에서는 강화보드, 익스팬디드 메탈 그리고, 탄소섬유그리드의 세 가지 보강재와 덮개 콘크리트 대용의 세라믹메탈재를 사용하여 RC보의 인장측을 보강한 경우에 그 보강효과를 파악하기 위한 구조실험을 수행하였다. 구조실험을 통하여 RC보 구조물에서 세라믹메탈재의 부착성능을 평가하였고, 각 보강방법에 대한 강성 증가 효과와 항복 후의 연성 증진 효과를 파악하였다. 그리고, 각 시험체의 실험 결과에 대한 비교를 통하여 더 나은 보강효과를 발휘할 수 있는 방안을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.308-312
• /
• 2003

The packaging of the integrated circuits requires knowledge of ceramics and metals to accommodate the fabrication of modules that are used to construct subsystems and entire systems from extremely small components. Composite ceramics ($Al_2O_3-SiO_2$) were tested for substrates. A stress analysis was conducted for a linear work-hardening metal cylinder embedded in an infinite ceramic matrix. The bond between the metal and ceramic was established at high temperature and stresses developed during cooling to room temperature. The calculations showed that the stresses depend on the mismatch in thermal expansion, the elastic properties, and the yield strength and work hardening rate of the metal. Experimental measurements of the surface stresses have also been made on a $Cu/Al_2O_3-SiO_2$ ceramic system, using an indentation technique. A comparison revealed that the calculated stresses were appreciably larger than the measured surface stresses, indicating an important difference between the bulk and surface residual stresses. However, it was also shown that porosity in the metal could plastically expand and permit substantial dilatational relaxation of the residual stresses. Conversely it was noted that pore clusters were capable of initiating ductile rupture, by means of a plastic instability, in the presence of appreciable tri-axiality. The role of ceramics for packaging of microelectronics will continue to be extremely challenging.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.79-88
• /
• 2000

The objective of this finite element method study was to analyze the stress distribution induced in a maxillary central incisor Ni-Cr base metal coping ceramic crowns with various margin design. Margin designs of crown in this experiment were knife-edge metal margin on chamfer finishing line of tooth preparation(M1), butt metal margin on shoulder finishing line(M2), reinforced butt metal margin on shoulder finishing line(M3), beveled metal margin on bevelde shoulder finishing line(M4). Two- dimensional finite element models of crown designs were subjected to a simulated biting force of 100N which was forced over porcelain near the lingual incisal edge. Base on plane stress analysis, the maxium von Miss stresses(Mpa) in porcelain venner was 0.432, in metal coping was 0.579, in dentin abutment was 0.324 for M1 model, and M2 model revealed in porcelain was 0.556, in metal coping was 0.511, in dentin was 0.339, and M3 model revealed in porcelain was 0.556, in metal coping was 0.794, in dentin was 0.383 for M4 model. All values of each material in metal-ceramic crown were much below the critical failure values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.378-379
• /
• 2009

High intensity metal halide discharge lamp performance, specifically the generated luminous flux and light color content, depends critically on the arc tube design. Factors influencing the design and consequent lamp efficacy include : lamp size, geometry, arc tube composition, fill chemistry, electrode design and excitation modes. Shaping of Polycrystalline Alumina(PCA) can be realized by conventional ceramic processes. Several processes are applied nowadays. Well-known in the ceramic high pressure field for decades are the pressing and the extrusion method. Newly developed slurry and precious forming technologies give the one-body seamless tubes, which improve thickness uniformity and lighting performance. Now, we reported some optical properties with different arc tube structures of ceramic metal halide lamps.

• 한국세라믹학회지
• /
• 제15권2호
• /
• pp.89-97
• /
• 1978

The basic mechanism of adherence in sintered high purity alumina ceramic-to-metal bonding was studied. Emphasis was placed on flux composition, porosity of the fired ceramics, and metallizing mixtures. The study was conducted on 95 and 99.5% alumina, using molydbenum-manganese, molybdenum-manganese-silicon dioxide metallizing compositions. Metallizing was performed in wet hydrogen (dew point, ＋17$^{\circ}C$) at 145$0^{\circ}C$ for 45min. This experiment indicated that adhernece mechanism of ultra high purity alumina ceramic was attributed to formation of $MnAl_2O_$4, and in the case of 95% alumina containing glass, the migration of glass from the interface into the void of the metal coating was the main role to the adhrence. It showed also that greater the bond-strength was resulted as porosity was increased.

• 한국세라믹학회지
• /
• 제16권3호
• /
• pp.169-177
• /
• 1979

The effect of apparent porosity of the fired ceramics, metallizing temperature, and metallizing mixtures on the bond strength in metal-to-ceramic seals was investigated. Three different metallizing compounds were metallized on dense alumina bodies at 1300~$1500^{\circ}C$ in dry hydrogen atmosphere. Bond strength between metal and alumina body was measured by means of nstron test machine. The greater bond strength was observed as the apparent porosity and metallizing temperature was increased. This work indicated that the glassy phase in metallizing mixture, having had sufficient fluidity to migrate into the alumina body, reacted with alumina and thereby forming strong metal-ceramic interface bond. It also showed that the glassy phase having higher thermal expansion cofficient than molybdenum might contribute to the strong bond formation by providing compressive stress around the molybdenum particle.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.156-163
• /
• 1997

Recently, attempts have been made to be join ceramics to metals in order to make up for the brittleness of ceramics. The difference in the coefficients of linear expansion of the two materials joined at high temperature will cause residual stress, which has a strong influence on the strength of the bonded joints. In this paper, the residual stress distribution and stress intensity factors of the ceramic/metal bonded joints were analyzed by 2-dimensional elastic boundary element method. Fracture toughness tests of ceramic/metal bonded joints with an interface crack were carried out. So the advanced method of quantitative strength evaluation for ceramic/metal bonded joints is to be suggested. Fracture surface and crack propagation path were observed using scanning electron microscope.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.230-234
• /
• 2006

Metal-Induced Crystallization (MIC) of amorphous silicon (a-Si) using aluminum and nickel as catalysts were performed with a variation of metal thickness and temperature. Raman results showed that the crystallization of a-Si depended on the thickness of aluminum while not on nickel. Nickel that forms silicide nodules during annealing simply catalyzed the formation of crystalline silicon (c-Si) while aluminum was consumed and transferred during MIC, which resulted in more complex microstructural characteristics. Crystalline silicons after NIC had elongated shape with a twin along the long axis. Morphological change after Aluminum-Induced Crystallization (AIC) showed more equiaxial grains. The nucleation and growth mechanism of AIC was discussed.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1113-1118
• /
• 2002

마이크로파 유전체용 $(Pb_{0.5}Ca_{0.5})(Fe_{0.5}Nb_{0.5})O_3$ (PCFN) 나노 분말을 metal-citrate 공정을 이용하여 합성하였다. 금속 이온들과 유기 조직의 결합으로 이루어진 고분자 전구체를 형성시키고 이를 열처리하여 화학양론적 조성과 균일한 크기 분포를 갖는 PCFN 분말을 성공적으로 합성하였다. 초기 비정질상 PCFN 분말은 약 $400{\circ}$에서부터 결정화가 시작되어 $700{\circ}$에서 완전한 결정화를 이루었고, $900{\circ}$ 이상에서는 PbO의 해리로 인한 pyrochlore상이 생성되었다. $700{\circ}$에서 열처리된 단일상의 perovskite PCFN 분말은 약 40 nm의 평균 크기와 균일한 형상으로 분포되어 있었다.