• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.671-678
• /
• 1998

Hertzian indentation tests with sphere indenters were used to study the mechanical properties of glass-in-filtrated alumina and spinel composites and evaluated the effect of preform microstructure and evaluated the effect of preform microstructure and glass con-tents on contanct damage and strength. The spinel composite showed more brittle behavior than the alumina composite which is verified from indentation stress-strain curve cone cracks and quasi-plastic deformation developed at subsurface. Failure originated from either cone cracks(brittle mode) or deformation zone(quasi-plastic mode) above critical load for cracking(Pc) and yield ({{{{ {P }_{Y } }}) with the brittle mode more dominant in the spinels and the quasi-plastic mode more dominant in the aluminas. Even though brittle mode was dominant in the spinel composites the strength degradation from accumulation of damage above these critical loads was conspicuously small suggesting that the glass-infiltrated composites should be highly damage tolerant to the blunt contacts.

• Journal of the Korean Ceramic Society
• /
• v.18 no.2
• /
• pp.112-118
• /
• 1981

A study was made on the processing of domestic blast furnace slag by flotation and chemical purification for the use of slag as a raw material in making soda lime glasses. Feasibility study has been made for the use of reprocessing slag as a source material for both coloring and chemical components (such as CaO, $Al_2O_3$, MgO and etc.) in the glass making process. Chemical composition of chemically purified slags ranges; $SiO_2$ 34.5~37.5, $Al_2O_3$, 16.2~14.1, $Fe_2O_3$ 0.33~0.14, CaO 34.5~38.8, MgO 4.0~5.2, NmO 0.16~0.39, $TiO_2$ 0.23~0.35, S 0.08~0.42, ignition loss 3.3~8.4 and others 0.48~0.51%. It was found that either amber or greenish color could be easily obtained with the addition of salg up to 24%, however the slag addition to glass batches much impaired the transmitancy of glass products, thus a glass made with 7% slag addition showed 82% in transmitancy value at 510 nm.

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.493-498
• /
• 1998

ZnS doped borosilicate glass for nonlinear optical application was prepared by melting and precipitation process. The optical band gap of the precipitated ZnS particles ranged from 3.83 to 3.96 eV compared with the bulk ZnS energy gap of 3.53 eV. This result was interpreted in terms of a quantum confinement effect due to small crystal size. ZnS partilcle size estimated by effective mass approximation ranged from about 39 to 83 $\AA$ It increased wtih the increase of heat tratment time and temperature.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.117-121
• /
• 2000

Er-doped sodiumborosilicate glass films for waveguides amplifier were fabricated by Aerosol Flame Deposition(AFD) method. Al2O3 was added to sodium borosilicate glass films to suppress the formation of crystalline phase and control the refractive index. the formation of crystalline phase was suppressed above Al2O3 of 6 wt%. As the amount of Al2O3 increased from 2 to 12 wt% the refractive index of glass films increased lineary from 1.4595 up to 1.4710. After the core of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3＋8wt%Er2O3 was coated on the buffer layer of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3, the core was etched by reactive ion etching. The absorption spectrum of 3 cm waveguide amplifier showed two peaks of 1530 and 1550 nm.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.312-316
• /
• 2014

The joining behavior of forsterite ceramics to SUS304 alloy using $8PbO-78Bi_2O_3-8B_2O_3-4ZnO-2SiO_2$ (wt%) system glass frit was investigated. The contact angle was smaller than $90^{\circ}$ at a temperature of $460^{\circ}C$. Redox reaction at the interface between forsterite and SUS304 was found to appear when the electrons in the metal part moved toward the glass part and the oxygen ions in glass moved to the metal side. The decrease of the surface tension due to the PbO solubility on the forsterite side contributed to the better wetting behavior at low temperature.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1337-1342
• /
• 1998

To investigate an effect of phase separation on precipitation characteristics of ZnS microcrystals in ma-trix glass ZnS doped borosilicate glasses for nonlinear optical applications were prepared by melting and pre-cipitation process. ZnS dopant contributed to phase separation promotion which increased the phase separa-tion of the matrix glass within immiscibility region. It was also found that ZnS as phase separation promoter showed a similar contribution for some selected glass compositions in miscibility region. The precipitation of ZnS microcrystals occurred in thephase separable glass compoitions. The radius of ZnS microcrystals in-creased with increasing the heat treatment temperature and Na2O contents of matrix glass composition. The ZnS particle sizes estimated by effective mass approximation ranged from about 30 to 80${\AA}$ It was suf-ficiently small to show quantum confinement effect.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1331-1336
• /
• 1995

The glass-ceramics for ferro-electric were made from compositions of 70PbO.16TiO2.8SiO2.4B2O3.2AlPO4 (wt%) and 67.5PbO.20TiO2.8.5SiO2.2B2O3.2AlPO4 (wt%). The crystallization kinetics for PbTiO3 crystalline phase formation from glass was studied using non-isothermal DSC techniques. The values of activation energy, ΔE using variables of heating rate and temperature were calculated at various reaction fractions obtained from peak area over DSC. The results indicated that activation energy was lowest at 60% reaction fractions and the activation energy of glass containing 20.0 wt% TiO2 is higher than that of glass containing 16.0 wt% TiO2. The crystallization mechanism was three dimensional growth (n=4).

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.97-102
• /
• 2002

The Purpose of this study was to investigate the exterior materials of super high-rise housing more than 30 stories which were built in New York City between 1924 and 2004. The result of examining 153 buildings was as follows; Exterior materials of super high-rise housing which were used bricks, of the salt-glazed bricks, terra-cotta and ceramic tiles, jumbo bricks and bricks were preferred among them. The colour of bricks was yellow, yellow ochre, clear brown, brown, dark brown, orange, vermilion and red. Exterior materials of super high-rise hotel and hotel apartment were bricks and ceramic tiles in the early days but stones, curtain wall and glass(green glass, green-tinted glass, brown-tinted glass, black glass) after 1980s. The main colour of buildings extended gray, green, blue-tinted brown-tinted and black.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.82-89
• /
• 2000

In lithium silicate photosensitive glass-ceramics, the relationship between lithography time and crystallization, and the effect of addition of mineral acid in etching rate and pattern shape were investigated. Irradiation times for micropatterning were less than 5 minutes in which Ce3+ ions in glass were changed rapidly to Ce4+ with ultra violet light. Overexposure to ultra brought about blot of pattern by diffiraction of light. Addition of mineral acid to HF enhanced etching rate as compared with HF solution only. The addition of H2SO4 especially increased the etching rate by 70%. But the mixed solution also increased the etching rate of the noncrystallized portion of the glass and this resulted in heavy etching. Etching with ultrasonic wave showed higher etching rate than that with the static or fluid method.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.119-122
• /
• 2015

Laser sealing with glass frits appears a promising technology for sealing various electronic devices (e.g., solar cells, displays) due to its several advantages. The purpose of this study is to understand the relationship between the composition of glasses and their laser-heating conditions. To allow glass to be sealed using laser heating, CuO was added to two different glass systems, in different amounts. The optical absorptivity of the glass samples was related directly to their CuO content. The laser-heating temperature and the CuO content exhibited a proportional relationship. Furthermore, the heating temperature increased linearly with the laser power used. From these results, we could determine the appropriate laser-heating conditions and CuO content for sealing electronic devices using laser-sealing technology.