• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.997-1001
• /
• 2016

Conductive ceramics are being developed to replace current Pt anodes in the electrolytic reduction of spent oxide fuels in pyroprocessing. While several conductive ceramics have shown promising electrochemical properties in small-scale experiments, their long-term stabilities have not yet been investigated. In this study, the chemical stability of conductive $La_{0.33}Sr_{0.67}MnO_3$ in $LiCl-Li_2O$ molten salt at $650^{\circ}C$ was investigated to examine its feasibility as an anode material. Dissolution of Sr at the anode surface led to structural collapse, thereby indicating that the lifetime of the $La_{0.33}Sr_{0.67}MnO_3$ anode is limited. The dissolution rate of Sr is likely to be influenced by the local environment around Sr in the perovskite framework.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.456-463
• /
• 2004

음극지지형 SOFC의 성능을 향상시키기 위해 단전지 제조공정을 개선하고 그 출력특성을 평가하였다. 액상응결 공정(Liquid Condensation Process : LCP)과 일축가압성형공정을 통하여 NiO/YSZ 복합체 음극기판을 제조하고 위에 YSZ 전해질을 스크린 인쇄한 후 140$0^{\circ}C$에서 3시간동안 동시소결하여 음극/전해질 기판을 제조하였다. 또한 LSM/YSZ 양극층은 임피던스 분석을 통해 분극저항이 최소가 되는 조성 및 열처리 조건을 선택하여 스크린 인쇄법을 이용해 구성하였고 이러한 적층공정을 거쳐 최종적으로 5${\times}$5와 l0${\times}$10 $\textrm{cm}^2$ 크기의 단전지를 제조하였다. 제조된 단전지의 출력특성을 측정한 결과 5${\times}$5와 10${\times}$10 단전지는 80$0^{\circ}C$에서 약 0.45W/$\textrm{cm}^2$ 와 0.22 W/$\textrm{cm}^2$의 최대출력밀도를 각각 나타내어 선행연구에서 기존공정으로 제조된 단전지에 비해 2배 이상 향상된 좋은 성능을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.154-154
• /
• 1998

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.51.1-51
• /
• 2003

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.46.2-46.2
• /
• 2003

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.127.2-127
• /
• 2003

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.364-369
• /
• 2017

Ceramic powder, such as MgO, is added as a binder to prepare the green compacts of molten salts of an electrolyte for a thermal battery. Despite the addition of a binder, when the thickness of the electrolyte decreases to improve the battery performance, the problem with the unintentional short circuit between the anode and cathode still remains. To improve the current powder molding method, a new type of electrolyte separator with porous MgO preforms is prepared and characteristics of the thermal battery are evaluated. A Spherical PMMA polymer powder is added as a pore-forming agent in the MgO powder, and an organic binder is used to prepare slurry appropriate for tape casting. A porous MgO preform with $300{\mu}m$ thickness is prepared through a binder burnout and sintering process. The particle size of the starting MgO powder has an effect, not on the porosity of the porous MgO preform, but on the battery characteristics. The porosity of the porous MgO preforms is controlled from 60 to 75% using a pore-forming agent. The batteries prepared using various porosities of preforms show a performance equal to or higher than that of the pellet-shaped battery prepared by the conventional powder molding method.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.85-95
• /
• 2023

In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li₇La₃Zr₂O₁₂, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10^-3 S cm^-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li⁺ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li⁺ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO₄ (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g^-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.912-918
• /
• 1992

Microstructure evolution including morphological change in the vicinity of the electrodes, porosity change and grain boundary migration was observed in polycrystalline CoO subject to electric fields at 1100 and 121$0^{\circ}C$ in air. At the cathode, the transported cations react with oxygen in the surrounding to form new lattices, while, at the anode, the reverse reaction occurs leading to lattice annihilation. Lattice formation also takes place at the surface of pores near the cathode inducing pore-filling effect. Grain boundary migration was found bo be enhanced or retarded depending on the field direction. It is therefore implied that the driving force of grain boundary migration is the vectorial sum of the curvature-induced chemical potential gradient and the electric field applied.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.293-299
• /
• 2001

이중층 탄소재료가 콜타르핏치와 메조페이스 핏치, 인조흑연, 천연흑연과 코크스를 사용하여 제조되었다. 콜타르 핏치는 톨루엔이나 경유와 같은 유기용매에 용해되어 코팅재로 사용되었다. 메조페이스 핏치, 인조흑연, 천연흑연 및 코크에 대한 콜타르 핏치의 코팅은 X선 회절분석과 CHN 분석을 통해 확인하였다. 코팅된 탄소재료를 질소분위기의 800-100$0^{\circ}C$에서 열처리한 후 리튬이온 전지의 음극으로 사용하기 위하여 2$600^{\circ}C$에서 열처리하였다. 이중층 탄소재료의 성능평가는 동전형태의 반쪽전지를 통해 수행되었는데, 평가는 음극으로서의 충전과 방전을 통해 수행되었다. 이런 충.방전 능력은 탄소재료의 열처리 온도의 변화나 전구체의 종류에 따라 달리 나타났지만 코팅방법의 차이에 의해서는 큰 차이가 없었다. 열처리를 80$0^{\circ}C$에서 한 경우가 100$0^{\circ}C$에서 한 경우보다 높은 충.방전 능력을 나타내었고, 2$600^{\circ}C$에서 흑연화된 것보다 탄화된 재료들이 높은 충.방전 능력을 나타내었다. 결론적으로, 음극재료의 성능은 결정화도, 조성 및 탄소재료의 미세구조에 따라 달라짐을 알 수 있었다.