• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.115-123
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve gasoline optically accessible engine with swirl control valve(SCV). It adapted three different types of SCA(open ration 72.5%, 78%, 89%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt)were calculated to explain burn rate and flame speed. From acquired flame images, inspected the flame propagation direction, flame area, and flame centroid, Flame propagation direction was shown different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame image at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1692-1701
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.344-352
• /
• 2002

In the analysis of the 3 dimensional plate structures by the finite element method, the triangular elements are generally used for the global stiffness matrix of the analyzed system. But the triangular elements of the plates have some problems in the process of formulation and in the precision of analysis. The formulation of the finite element method to analyze 3 dimensional plate structures using quadrilateral elements is presented in this paper. The degree of freedom off nodal point is 6, that is, the displacements in the direction off-y-z is and the rotations about x-y-z axis and then the degree of freedom off element is 24. For the comparison of the analysis using triangular elements and quadrilateral elements, the rectangular plates subjected to the uniform load and a concentrated load on the centroid of the plate, for which the theoretical solutions have been obtained, are analyzed. The calculated deflections of the rectangular plates using the finite element method by the triangular elements and the quadrilateral elements are also compared with the deflections of the plates calculated by theoretical solutions. The defections of the rectangular plates calculated by the finite element method using the quadrilateral elements are closer to the theoretical solutions than the defections calculated by the finite element method using the triangular elements. The deflection of the centroid of plate, calculated by the finite element method, converges to that of theoretical solution as the number of elements is increased. This convergence is much more rapid for the case of using the quakrilateral elements than fir the case of using triangular elements.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2010

For three and more rapidly moving vehicles, they want to search the nearest location for meeting. Each vehicle has a different velocity and a efficient method is needed for shifting a short distance. It is observed that the existing group nearest-neighbor query has been investigated for static query points; however these studies do not extend to highly dynamic vehicle environments. In this paper, we propose a novel Dynamic Nearest-Neighbor query processing for Multiple Vehicles (DNN_MV). Our method retrieves the nearest neighbor for a group of moving query points with a given vector and takes the direction of moving query points with a given vector into consideration for DNN_MV. Our method efficiently calculates a group nearest neighbor through a centroid point that represents the group of moving query points. The experimental results show that the proposed method operates efficiently in a dynamic group nearest neighbor search.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.12
• /
• pp.125-130
• /
• 2017

Screw insertion surgery is frequently required among surgical procedures. Especially, very careful attention should be paid to the insertion of screw in the operation of the cervical vertebra. Therefore, there is a need for a guide that allows the surgeon to reliably and promptly perform treatment by calculating the desired insertion angle and length for screw insertion. In this study, the center and direction of the pedicle were calculated through 3D modeling and 3D vector numerical analysis using the CT or MRI image of the patient for the safe operation of the guide, and based on this, After that, we will implement surgical guide based on this.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.393-398
• /
• 2002

This study proposes a method to reduce error scanning data of laser scanner. The method co of 3 stages. First, there is an error indu difference of the distance between the prob the object. It is possible to reduce the e planning a scanning strategy: object settin path. Second, the scan data loss of the tooli affects calculating the tooling ball con z-direction compensation is given to calculat accurate registration points. Third, three p used to determine a transformation matrix on frame. As merging, the maximum error usually on the third tooling ball in the conven method, which select a point among three po randomly. We find the centroid of 3 points apply it to determine a new transformation mat

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.200-204
• /
• 1996

It is a great number of problem for the man to perform maintenance and repairing work owing to radioactive effusion for a nuclear fuel and the pollution of an related equipment in nuclear power plants. Therefore, the vision processing system presented in this research requires to maintain the good performance under the radioactive circumstances and to safety the real time processing system presented in this research requires to maintain the good performance under the radioactive circumstances and to safety the real time processing. The proposed vision scheme adapts the gradient and Laplacian operator to perform the high speed processing in an edge detection and the centroid formula at each direction to obtain the center position of a holes using DSPs

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5541-5554
• /
• 2018

A voice is one of the most significant non-verbal elements for communication. Disorders in vocal organs, or habitual muscular setting for articulatory cause vocal disorders. Therefore, by analyzing the vocal disorders, it is possible to predicate vocal diseases. In this paper, a method of predicting vocal disorders using the jitter, shimmer, and harmonics-to-noise ratio (HNR) extracted from vocal records is proposed. In order to extract jitter, shimmer, and HNR, one-second's voice signals are recorded in 44.1khz. In an experiment, 151 voice records are collected. The collected data set is clustered using cobweb clustering method. 21 classes with 12 leaves are resulted from the data set. According to the semantics of jitter, shimmer, and HNR, the class whose centroid has lowest jitter and shimmer, and highest HNR becomes the normal vocal group. The risk of vocal disorders can be predicted by measuring the distance and direction between the centroids.

• Journal of the Korean Statistical Society
• /
• v.17 no.2
• /
• pp.121-133
• /
• 1988

In this paper a class of mixture designs for estimating the slope of second order Scheffe polynomial response surfaces for mixture experiments with q components is presented. The variance of the estimated directional slope at a point is a function of the direction of the slope and the design. If the variance is averaged over all possible directions in the (q-1)-dimensional simplex, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the centroid point. This property is called "slope-rotatability over al directions in the simplex", and the necessary and sufficient conditions for mixture design to have this property are given and proved. The class of designs with this property is compared with other mixture designs and discussed.discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.648-656
• /
• 2015

Active SAR satellite's main maneuver is roll axis maneuver to change SAR antenna direction. In addition, yaw steering is required to minimize the doppler centroid variation. Thus, it is resonable to assign the torque/momentum capacity mostly to roll axis and then yaw axis. In this case, the pitch axis shows low agility performance. However, due to orbit maintenance, large angle maneuver about pitch axis is sometimes required. In this paper, we study the pitch axis maneuver time reduction through sequential rotation about roll and yaw axis. Since these two axes have high agility performance than pitch axis, maneuver time reduction is possible when large angle rotation about pitch axis is required.