• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.823-827
• /
• 2008

The effects of blade leading edge sweep on both the aerodynamic performance and the structure stress of a high pressure centrifugal compressor impeller are numerically investigated. Changes in the flow structure occur as a result of the effect of leading edge sweep on the loading distribution in the tip region. The flow separation is avoided by introducing a sweep of the main blade leading edge and the strength of shock is reduced at the same time. Backswept of the leading edge is found to be beneficial to the impeller performance improving. On the other hand, the structural analysis indicated that high rotating speed of the impeller will cause substantial high bending stresses and radial deflections of the blade. Studies have shown that it is possible to control the stress distribution along the tip and root of the blade by slight adjustments to the sweep angle of the leading edge. These adjustments may be used to design the impeller with lower blade root stress distribution without aerodynamics performance penalty.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1065-1072
• /
• 2014

본 연구에서는 양흡입 원심블로어의 성능향상을 위하여 임펠러 스플리터의 형상 최적화 연구를 수행하였다. 두 개의 스플리터 형상 설계 변수(스플리터 코드 및 피치)를 선정하여 블로어 성능 및 내부 유동장 특성을 평가하였다. 수치해석에 의한 블로어 성능은 설계유량 조건에서 실험결과와 최대 4 % 이내로 잘 일치하였다. 스플리터 형상 최적화를 통하여 설계조건에서의 블로어 효율 및 압력은 기준 블로어 보다 3.65 % 및 1.14 % 각각 향상되었다. 스플리터 최적설계로 임펠러 날개 부압면의 유동박리를 억제시켜 익간 저속 유동에 의한 압력손실을 줄임으로써 블로어 전체의 성능이 향상되었다. 익간 내부유동 균일화는 임펠러 출구속도 분포에도 영향을 주어 볼류트케이싱 출구압력도 향상되었다.

• 한국지반공학회논문집
• /
• 제34권1호
• /
• pp.25-35
• /
• 2018

구조물-지반-구조물 상호작용을 확인하기 위하여 다양한 크기를 가지는 얕은 기초에 대하여 원심모형실험에 의한 진동대실험을 실시하고 결과를 분석하였다. 낙사법을 이용하여 지반을 조성하였으며, 두 기초의 이격 거리 및 매립에 따른 거동을 평가하였다. 원심모형실험 시 측정된 깊이별 지반 가속도는 입력 지진파의 크기가 증가함에 따라 증가하는 경향을 보였으며, 증폭 현상에 의하여 지표면에서 가장 큰 값을 보였다. 두 기초의 이격 거리가 줄어듦에 따라 구조물-지반-구조물 상호작용에 의하여 가속도 응답 스펙트럼 비(RRS)의 크기는 커지며, RRS 값이 최대가 되는 주기는 줄어 들었다. 동일한 이격 거리에서 기초가 지반에 매립될 경우, 두 기초의 RRS는 감소하는 경향을 보였다.

• 분석과학
• /
• 제25권6호
• /
• pp.476-482
• /
• 2012

황사입자들은 수 나노미터에서 수 마이크론 사이의 크기를 가지는 것으로 알려져 있다. 황사가 환경 및 인체 건강에 미치는 영향은 황사 입자의 크기에 의존한다. 입자가 작을수록 멀리까지 이동하며, 인체의 호흡기관 깊숙이 침투한다. 침강장-흐름 분획법(sedimentation field-flow fractionation, SdFFF)은 채널 내 포물선형태의 흐름(parabolic flow profile)과 외부에서 가해지는 원심력의 상호작용을 이용하여 나노 및 마이크론 크기의 입자들의 분리를 제공한다. 본 연구에서는 황사입자의 크기별 분리와 특성분석을 위한 steric 모드 침강장-흐름 분획법(Sd/StFFF)의 응용 가능성을 테스트하였다. 이를 위하여 다양한 Sd/StFFF 파라미터들을(유속, stop-flow time, 원심력의 세기, 등) 최적화 하였다. Sd/StFFF 보정곡선의 $R^2$값은 0.9983으로 높은 직선성을 보였으며, 실험결과는 Sd/StFFF가 마이크론 입자의 크기별 분리에 우수함을 보여주었다. 광학현미경(optical microscopy, OM)을 이용하여 황사입자들의 크기와 모양을 조사하였다. 황사가 진할 때에는 약할 때보다 입자크기가 증가함을 보여주었다. 또한 비가 올 때에는 건조할 때보다 입자크기가 감소하였는데, 이는 입자 표면에 흡착되어 있는 성분들이 빗물에 의해 제거되었기 때문인 것으로 보여진다. 본 연구의 결과는 Sd/StFFF가 황사와 같이 환경입자의 크기특성분석에 유용함을 보여준다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.216-219
• /
• 2001

In this study, a hydrocyclone operated by centrifugal force was examined as a part of dredge system of lake sediments. It does not help dehydration of the sediments, but also enables the classification of fine particles in the stable and sanitary treatment. Several experiments were performed focusing on the separation efficiency under the condition of room temperature with virtual sediment samples and simulated particles. As a result of the experiment, it was found that the apex size of the cyclone greatly affected the cut diameter(d$_{50}$), and high density particles were separated more effectively.y.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.664-667
• /
• 2001

Segregation of binary particle systems in a horizontally gyrated bed has been experimentally studied to recover the heavy metals from municipal waste incineration (MWI) ash. Differences in density and size had less effect on segregation. Effective segregation took place under the centrifugal effect of 1 or less for any particle size ratio. Zn, Cu and Pb were concentrated in the upper side of bed by the horizontal vibration. However, there was less change in concentration for other metals such as Mg, Al and Fe etc. The separation system with the horizontal gyrating separator proved to be an effective method for the pretreatment of recovering Zn, Cu and Pb from incineration residues.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.291-296
• /
• 2008

In order to improve the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and circumferentially grooved stator, CFD analysis using FLUENT has been performed to determine the groove penetration angle a which is the angle of separation line between control volumes II and III in groove section of Ha and Lee's three-control-volume theory. Validation to the present analysis using new penetration angle determined by the CFD analysis is achieved by comparisons with the results of published Ha and Lee's analysis. For the leakage prediction the present analysis shows slight improvement and CFD results yields the best. Direct damping and cross-coupled stiffness coefficients are predicted better to the experimental ones. However, direct stiffness coefficient is predicted worse.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.188-193
• /
• 2008

Epoxy/Organically Modified Layered Silicate Nanocomposites were prepared by dispersing synthetic layered silicate modified with alkyl ammonium ions. In the dispersing process, the organically modified layered silicate were mixed in epoxy resin with shearing, and aggregation of the silicate were removed by centrifugal separation after mixing epoxy resin and silicates. Micrographs taken by transmission electron microscopy(TEM) indicate that the nanocomposites have a mixed morphology including both parallel silicate layers and exfoliated silicate layers area, As the thermal properties, the glass transition temperature of the nanocomposites was shifted to a higher temperature($+6^{\circ}C$)than pure epoxy. Furthermore, dispersion of OMLS will prevented relative permittivity from increasing at a high temperature above the glass transition temperature.

• 연구논문집
• /
• 통권31호
• /
• pp.53-63
• /
• 2001

Numerical investigation based on the control-volume using finite-difference method has been made by the development of computer program in order to figure out the pattern of the flow field inside screw decanter. The typical flow pattern inside screw decanter is characterized by the two strong recirculation zones separated by the main stream from slurry discharge hole to exit. These recirculation regions and flow pattern are strongly influenced by the centrifugal force and the change of the value of slurry viscosities, that is,500, 1,000 and 3,000cp respectively. The wear of screw decanter appeared experimentally in two spots; one is near the circumferential area of the slurry discharge hole and the other is on the decanter blades at a certain height from the bottom to a different degree after the continuous long-term operation. These wears are partly explained by the flow pattern and the strong turbulence intensity near the recirculation attachment region.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권4호
• /
• pp.368-371
• /
• 2006

The standard procedure outlined by the United States Environmental Protection Agency (US EPA) in Method 1623 for analyzing Giardia lamblia cysts and Cryptosporidium parvum oocysts in water samples consists of filtration, elution, centrifugal concentration, immunomagnetic separation (IMS), and immunofluorescence assay (IFA) followed by microscopic examination. In this study, the extent of (oo)cyst loss in each step of this procedure was evaluated by comparing recovery yields in segmented analyses: (i) IMS + IFA, (ii) concentration + IMS + IFA, and (iii) filtration/elution + concentration + IMS + IFA. The complete (oo)cyst recovery by the full procedure was $52{\sim}57%$. The (oo) cyst loss in the IMS step was only $0{\sim}6%$, implying that IMS is a fairly reliable method for (oo)cyst purification. Centrifugal concentration of the eluted sample and pellet collection before IMS resulted in a loss of $8{\sim}14%$ of the (oo)cysts. The largest (oo)cyst loss occurred in the elution step, with $68{\sim}71%$ of the total loss. The permeated loss of (oo)cysts was negligible during filtration of the water sample with a $1.0-{\mu}m$ pore polyethersulfone (PES) capsule. These results demonstrated that the largest fraction of (oo)cyst loss in this procedure occurred due to poor elution from the filter matrix. Improvements in the elution methodology are therefore required to enhance the overall recovery yield and the reliability of the detection of these parasitic protozoa.