• Smart Structures and Systems
• /
• v.22 no.5
• /
• pp.547-560
• /
• 2018

This paper investigates the operation of the $H_{\infty}$ static output-feedback controller to reduce dynamic responses under seismic excitation on the five-story and benchmark 20 story building with parametric uncertainties. Linear matrix inequality (LMI) control theory is applied in this system and then to achieve the desired LMI formulations, some transformations of the LMI variables is used. Conversely uncertainties due to material properties, environmental loads such as earthquake and wind hazards make the uncertain system. This problem and its effects are studied in this research. Also to decrease the transition of large amount of data between sensors and controller, avoiding the disruption of whole control system and economy problems, the operation of the decentralized controllers is investigated in this paper. For this purpose the comparison between the performance of the centralized, fully decentralized and partial decentralized controllers in uncoupled and coupled cases is performed. Also, the effect of the changing the number of stories in substructures is considered. Based on the numerical results, the used control algorithm is very robust against the parametric uncertainties and structural responses are decreased considerably in all the control cases but partial decentralized controller in coupled form gets the closest results to the centralized case. The results indicate the high applicability of the used control algorithm in the tall shear buildings to reduce the structural responses and its robustness against the uncertainties.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.485-490
• /
• 2006

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than before. In this paper, new Network-based protocol between railway signaling and SCADA (Supervisory Control and Data Acquisition system) has designed and the overview of designed protocol is briefly represented. And also this paper addresses analysis of newly designed train control systems. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC (Centralized Traffic Control)/SCADA has an extra data transmission error control (CRC16) besides the inherent error control of the Ethernet and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the additional error control code contributes to lowering the frame error rate. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1938-1943
• /
• 2005

Network human-robot interface is an important research topic. In home application, users access the robotic system directly via voice, gestures or through the network. Users explore a system by using the services provided by this system and to some extend users are enable to participate in a service as partners. A service may be provided by a robot, a group of robots or robots and other network connected systems (distributed sensors, information systems, etc). All these services are done in the network environment, where uncertainty such as the unstable network connection, the availability of the partners in a service, exists. Moreover, these services are controlled by several users, accessing at different time by different methods. Our research aimed at solving this problem to provide a high available level, flexible coordination system. In this paper, a multi-agent framework is proposed. This framework is validated by using our new concept of slave agents, a responsive multi-agent environment, a virtual directory facilitator (VDF), and a task allocation system using contract net protocol. Our system uses a mixed model between distributed and centralized model. It uses a centralized agent management system (AMS) to control the overall system. However, the partners and users may be distributed agents connected to the center through agent communication or centralized at the AMS container using the slave agents to represent the physical agents. The system is able to determine the task allocation for a group of robot working as a team to provide a service. A number of experiments have been conducted successfully in our lab environment using Issac robot, a PDA for user agent and a wireless network system, operated under our multi agent framework control. The experiments show that this framework works well and provides some advantages to existing systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.494-497
• /
• 2005

Direct velocity feedback (DVFB) control with a collocated distributed actuator and point sensor pair is known that it offers a good stability with high performance when the control strategy is applied at the suppression of structural vibration. Also decentralized control method introduced to offer to reduce implementaion effort and malfunction due to failure in sensors and actuators of control system has become an important position in DVFB. In this paper, the decentralized control is compared with centralized control in terms of vibrational velocity reduction in a clamped-clamped beam.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.183-187
• /
• 1989

This paper presents on approach to the position control of a robot manipulator by using a decentralized adaptive control scheme. The large scale system is regarded as the system which consists of many subsystems having interconnection. In each subsystem, a local control system is composed by feedforward and feedback component, one computes the nominal torque from the Newton-Euler equation, the other computes the perturbation equation which reduce the position error of the manipulator along the nominal trajectory. A computer simulation studies was conducted to evaluate and compare the performances of the proposed manipulator control scheme with those of the PD control and centralized control schemes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.470-473
• /
• 1995

There exist two critical in application of the magnetic bearing system. One is the control axis interference caused by gyroscopic effect and the other is the vibration caused by the unbalance on the rotor. To solve both problems at the same time, first, a centralized full-state feedback controller based on the LQR control theory was designed to compensate for the gyroscopic effect. Second, disturbance rejection control input based on the observer was designed to avoid the vibration causer by the unbalanced rotor. Balancing input computer accroding to LQR and output of the observer were derived in term of rotational speed. Effectiveness of the on-line balancing was verified through numerical simulation. The developed observer-based controller was also applied to the linear and nonlinear magnetic bearing systems.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.4
• /
• pp.30-38
• /
• 2003

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.165-171
• /
• 2006

This paper proposes a data fusion algorithm of nonlinear multi sensor dynamic systems of synchronous sampling based on filtering step by step. Firstly, the object state variable at the next time index can be predicted by the previous global information with the systems, then the predicted estimation can be updated in turn by use of the extended Kalman filter when all of the observations aiming at the target state variable arrive. Finally a fusion estimation of the object state variable is obtained based on the system global information. Synchronously, we formulate the new algorithm and compare its performances with those of the traditional nonlinear centralized and distributed data fusion algorithms by the indexes that include the computational complexity, data communicational burden, time delay and estimation accuracy, etc.. These compared results indicate that the performance from the new algorithm is superior to the performances from the two traditional nonlinear data fusion algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.516-525
• /
• 1990

This paper proposes a hierarchical control algorithm for an efficient network management of a loosely-coupled system which consists of functional division and duplicating structure with a LAN to enhance reliability and availability. The algorithm is modeled using the Perti-net and verified with the reachability tree. Here, the proposed algorithm is compared with the purely centralized control algorithm and distributed control algorithm in terms of message traffic for the network management. The result shows that the message traffic related to system performance is as low as centralized control algorithm and the system availability is independent of a specific processor failure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.701-706
• /
• 1994

Holonic manufacturing system is a new approachto the organization and architecture of decentralized, autonomous and cooperative manufacturing system. The new paradigm combines the concepts of hierarchical systems and the integration of autonomous elements in distributed system. Today's scheduling and control techniques are mostly based on a centralized structure. Only little work has been done on scheduling and control of decentralized, autonomous and cooperative manufacturing system. This paper proposes a new approach IPM(Interactive Prediction Method) for scheduling and control of holonic manufacturing system.