• Journal of Service Research and Studies
• /
• v.4 no.1
• /
• pp.71-81
• /
• 2014

It is important for regional comparative analysis about economically active population ratio by sex and total economically active population ratio to a policy data of central and local government. Through the result of comparative analysis, Central and local government can use policies distinctively according to the region and keep the efficiency of detail policy application. This paper shows regional comparative analysis about economically active population ratio by sex for the Seoul metropolitan region, Gangwon region, Chungcheong region, Youngnam region, Honam region using the economically active population survey data in 16 cities and provinces. We used the survey of economically active population for 13 years from 2000 to 2012, we calculated total economically active population ratio and economically active population ratio by sex about the 5 regions. And we analyzed the relative ratio between economically active population ratio of male and female by each region, we also analyzed the results of regional comparative analysis by sex.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.231-239
• /
• 1972

The central region of South Korea is composed of Precambrian formations and Jurassic Daebo granites and is divided tectonically into three provinces, that is, the Ok chon geosynclinal zone in the middle, the Kyonggi massif on the north and northwest side, and the Ryongnam massif on the south and southeast side. The general trend of the Okchon geosynclinal zone and the distribution of Daebo granites is northeast, the Sinian direction. The Kyonggi massif is composed of Precambrian Y onchon system, Sangwon system, gneisses, and Daebo granites, and the Ryongnam massif also Precambrian Ryongnam and Yulri systems, gneisses, and Daebo granites. Precambrian formations in both areas are of flysch type sediments and may be roughly correlated with each other. These formations except Sangwon and Yulri systems are thought to be early to middle Precambrian age and have acted as basement for the Okchon geosyncline where late Precambrian Okchon system was deposited. The Okchon geosynclinal zone is divided into paleogeosynclinal zone to southwestern parts where the Okchon system is distributed, and neogeosynclinal zone to northeastern parts where nonmetamorphosed Paleozoic sediments are dominantly cropped out. Both zones are separated by upthrust created by Daebo orogeny of Jurassic period, which continues southwesterly to bind the Okchon geosynclinal zone and the Ryongnam massif at southwestern parts bisecting Korea peninsula diagonally. Three periods of structural development are recognized in the area. Folds and faults of preTriassic age prevail in the Kyonggi massif. Many isoclinal folds and thrusts originated by Jurassic Daebo orogeny are aligned in the Okchon paleogeosynclinal zone paralleling to the geosynclinal axis so that same formation appears repeatedly in narrow strips, whereas fold axis in neogeosynclinal zone trerid west-northwesterly which might be of Triassic in age and modified by later Daebo orogeny. Discontinuity of geology and structure of Okchon geosynclinal zone is attributed to shifting of the geosyncline through geologic time.

• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.261-276
• /
• 1991

The main aspect of this study are to clarify igneous activity of igneous rocks, which is a member of various intrusives and volcanics exposed in Naju-Namchang area of southern central zone of Ogcheon Geosynclinal Belt, southern part of Youngdong-Kwangju depression zone of tectonic provinces in Korea. Naju-Namchang area are subdivided into three rock belts based on occuring of Cretaceous granites. Three rock belts consist of foliated granites, Jurassic granites and Cretaceous granites in central granitic rock belt (C-C), and acidic tuff and lavas in northwest volcanic rock belt(C-NW) and southeast volcanic rock belt(C-SE). Chemical composition of these igneous rocks show mostly similar trend to the Daly's values on Harker diagram and correspond to VAG + Syn-COLG region on Pearce's discrimination diagram. These igneous rocks vary wide range in total REE amount(37.4-221.3ppm) characterized by enriched LREE content and steep negative slope in Eu(-) anomaly. It is concluded each synchronous granites which composed of serveral rock facies is considered to formed by differentiation of co-magma at continental margin, and igneous activity of study area are two more Pre-Cambrian Orogenies, Songrim Disturbance, Daebo Orogeny and Bulkuksa Disturbance.

• Journal of the korean society of oceanography
• /
• v.39 no.1
• /
• pp.57-71
• /
• 2004

Based on the data obtained under the China-Korea joint project (1997-2001) and historic observations, the distribution, transportation and sedimentation of sediment in the southern Yellow Sea (SYS) are discussed, and the controversial formation mechanism of muddy sediments is also explored. The sediment transport trend analysis indicates that the net transport direction of sediment in the central SYS (a fine-grained sediment deposited area) points to $123.4^{\circ}E,\;35.1^{\circ}N$, which is a possible sedimentation center in the central SYS. The sediment transport pattern is verified by the distribution of total suspended matter (TSM) concentration and ${\delta}^{13}C$ values of particulate organic carbon (POC), the latter indicates that the bottom water plays a more important role than the surface water in transporting the terrigenous material to the central deep-water area of the SYS, and the Yellow Sea circulation is an important control factor for the sediment transport pattern in the SYS. The carbon isotope signals of organic matter in sediments indicate that the Shandong subaqueous delta has high sedimentation rate and the deposited sediments originate mainly from the modern Yellow River. The terrigenous sediments in deep-water area of the SYS originate mainly from the old Yellow River and the modern Yellow River, and only a small portion originates from the modern Yangtze River. The analytical results of TSM and stable carbon isotopes are further confirmed by another independent tracer of sediment source, polycyclic aromatic hydrocarbons (PAHs). Five light mineral provinces in the SYS can be identified and they indicate inhomogeneity in sources and sedimentary environment. The modern shelf sedimentary processes in the SYS are controlled by shelf dynamic factors. The muddy depositional systems are produced in the shelf low-energy environments, which are controlled by some meso-scale cyclonic eddies (cold eddies) in the central SYS and the area southwest of the Cheju Island. On the contrary, an anticyclonic muddy depositional system (warm eddy sediment) appears in the southeast of the SYS (the area northwest of the Cheju Island). In this study, we give the cyclonic and anticyclonic eddy sedimentation patterns.

• The Korean Journal of Archival Studies
• /
• no.34
• /
• pp.29-56
• /
• 2012

Since 2011, 148 public institutions (including the central administrative agencies) have been moving to the provinces. First of all, the Prime Minister's Office began to be relocated to Sejong City on 14 Sep, 2012, followed by 6 central administrative agencies and their cooperative agencies are planned to move there. With regard to public institutions' relocation, the issue of record centers' relocation should be also considered. In respect that there is lack of facilities, manpower, and equipment in most record centers, it is doubtable whether the relocation of record centers will end successfully. The purpose of this study is to investigate the current state of record centers and to grasp their issues when they are relocated. The targets are the central administrative agencies which will move in 2012. The data was collected by request of information disclosure and personal contact with record centers. After analyzing collected data, both the issues caused by relocation and the cases of environment improvement were assured. In addition, the improvement of record centers' limitation (ex. The lack of exclusively responsible workers, the shortage of facilities, space and budget etc.) was suggested.

• Natural Product Sciences
• /
• v.11 no.3
• /
• pp.123-126
• /
• 2005

Gastrodia elata Blume (Chunma) belongs to Orchidaceae, which is a perennial parasitic herbaceous plant and grows in the woods of the central provinces of China, Korea and Japan. Recently, the constituents of the tubers of this plant have been investigated by researchers who have revealed the presence of phenolic compounds including gastrodin as a major constituent, together with 4-hydroxybenzaldehyde, 4-hydroxybenzyl alcohol, parishin, 4,4-dihydroxybenzyl sulfoxide, vanillin, vanillyl alcohol, beta-sitosterol, organic acids and polysaccharides, etc. In this study, we used ultrasonicator and two kinds of enzymes for enhancement of extraction yield. We also used electronic nose for the aroma pattern analysis of Chunma extracts. The concentrations of glucose and functional constituents (gastrodin, vanillin, 4-hydroxybenzaldehyde and 4-hydroxybenzyl alcohol) were measured by biochemistry analyzer and HPLC, respectively. Therefore, we showed that the yield of extraction was increased and discomfortable odor was reduced.

• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.165-178
• /
• 2020

This paper investigates the effect of the jaw's curvature, also known by contact angle and jaw arc central angle (2α), of the Brazilian test apparatus on indirect tensile strength of various rock types. That's why, ten rock samples including limestone, marble, skarn, granite, diorite, and granodiorite were collected from some quarries in different provinces of Iran. Petrographic, mineralogical and textural investigations were performed using thin section analyses. Physical properties of the selected rock samples namely dry and saturated unit weights, porosity, water absorption, and specific gravity were determined for the rock samples. In addition, Brazilian tensile strength at different 2α angles (i.e., 2α = 0°, 10°, 15°, 20°, 45°, and 60°) were determined for the rocks in the laboratory. Results show that the parameter for the rocks is between 3.81 MPa at 2α=0° and 54.76 MPa at 2α=60°. This means that Brazilian tensile strength increased with increasing 2α angle from 0° to 60°. Also, it was found that the highest change rate of the Brazilian tensile strength occurs in range of 2α=15°-30° for most studied rock samples. In some tested samples, the parameter is decreased only at 2α = 60°. The values of Brazilian tensile strength of the rocks tested by flat and standard jaws are near to each other.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.2
• /
• pp.7-15
• /
• 2019

Purpose - The industrial structure upgrading can play an important role in promoting the carbon emission efficiency. Thus, this paper attempts to study the impact of industrial structure upgrading on carbon emission efficiency in order to reduce carbon emissions. Research design, data, and methodology - This paper selects panel data of 30 provinces and municipalities (autonomous regions) in China from 2001 to 2016, and divides them into three regions. The Moore index is used to measure the industrial structure upgrading, the non-radial SBM model based on undesired output is used to measure the slack variable to calculate the total factor carbon emission efficiency. Finally the impact of industrial structure upgrading on the carbon emission efficiency are analyzed. Results - It is found that the Moore index and the carbon emission efficiency in the eastern region is the highest in the three regions. Conclusions - The influence of various influencing factors on carbon emission efficiency is different between regions. The Moore index has a positive effect on the carbon emission efficiency in the eastern region, and has a negative influence coefficient on the central region. The effect on the western region is not obvious.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.7
• /
• pp.13-20
• /
• 2017

Purpose - Performance appraisal has a significant influence on the development of low-carbon tourism distribution. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. SBM-Malmquist model is used to measure the TFP and its dynamic changes of low-carbon tourism distribution; TOBIT model is used to discuss the factors of TFP of low-carbon tourism distribution. Results - The results show that, there are obvious differences among regional TFP of low-carbon tourism distribution, the average change tends to grow positively in general, and the western region grows fastest on average due to the improvement of technical efficiency and technical progress, while there are technical efficiency improvement but technical regresses in eastern and central regions. The economic scale, economic strength, structure of energy consumption, location quotient and government regulation have a significant positive effect on the TFP of low-carbon tourism; energy intensity, industrial structure and opening degree have a negative effect; investments in fixed assets, intensity of R&D fund and urbanization rate have no significant influence on the TFP of low-carbon tourism. Conclusions - Improving the productivity of low-carbon tourism and reducing regional differences are effective ways to develop low-carbon tourism and enhance tourism competitiveness.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.7-15
• /
• 2018

Purpose - The development of Anhui high-tech industry is the key to transforming the mode of economic development and optimizing the industrial structure. Research design, data, and methodology - The data of paper that is the data of Anhui province and the six provinces of central China from 2010 to 2015, which analyzed the present situation of High-tech industry in Anhui Province by means of data comparison and literature analysis, and then explored several possible modes of undertaking. Results - With the analysis of the current situation of the development of high-tech industry in Anhui Province, several possible modes for undertaking the transfer of high-tech industries in Anhui Province were explored: The mode of undertaking of Leading Enterprises + Industrial park, the mode of undertaking of differentiated development + Regional comprehensive exploitation and the mode of undertaking "Dynamic industrial Chain" + industrial cluster. Conclusions - Based on the perspective of industrial upgrading, this paper analyzes the shortcomings of Anhui Province in the traditional mode of undertaking industrial transfer and expounds the inherent requirements of innovation industry undertaking. Finally, on the basis of the above analysis, the author explored three possible modes of acceptance.