• 제목/요약/키워드: Central Column

검색결과 210건 처리시간 0.023초

Validation on the Analytical Method of Ginsenosides in Red Ginseng

  • Cho B. G.;Nho K. B.;Shon H. J.;Choi K. J.;Lee S. K.;Kim S. C;Ko S. R.;Xie P. S.;Yan Y. Z.;Yang J. W.
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 2002년도 학술대회지
    • /
    • pp.491-501
    • /
    • 2002
  • A cross-examination between KT&G Central Research Institute and Guangzhou Institute for Drug Control was carried out in order to select optimum conditions for extraction, separation and determination of ginsenosides in red ginseng and to propose a better method for the quantitative analysis of ginsenosides. The optimum extraction conditions of ginsenosides from red ginseng were as follows: the extraction solvent, $70\%$ methanol; the extraction temperature, $100^{\circ}C;$ the extraction time, 1 hour for once; and the repetition of extraction, twice. The optimum separation conditions of ginsenosides on the SepPak $C_{18}$ cartridge were as follows: the loaded amount, 0.4 g of methanol extract; the washing solvents, distilled water of 25 ml at first and then $30\%$ methanol of 25 ml; the elution solvent, $90\%$ methanol of 5 ml. The optimum HPLC conditions for the determination of ginsenosides were as follows: column, Lichrosorb $NH_2(25{\times}0.4cm,$ 5${\mu}m$, Merck Co.); mobile phase, a mixture of acetonitrile/water/isopropanol (80/5/15) and acetonitrile/water/isopropanol (80/20/15) with gradient system; and the detector, ELSD. On the basis of the optimum conditions a method for the quantitative analysis of ginsenosides were proposed and another cross-examination was carried out for the validation of the selected analytical method conditions. The coefficient of variances (CVs) on the contents of ginsenoside-$Rg_{1}$, -Re and $-Rb_1$ were lower than $3\%$ and the recovery rates of ginsenosides were $89.4\~95.7\%,$ which suggests that the above extraction and separation conditions may be reproducible and reasonable. For the selected HPLC/ELSD conditions, the CVs on the detector responses of ginsenoside-Rg, -Re and $-Rb_1$) were also lower than $3\%$, the regression coefficients for the calibration curves of ginsenosides were higher than 0.99 and two adjacent ginsenoside peaks were well separated, which suggests that the above HPLC/ELSD conditions may be good enough for the determination of ginsenosides.

  • PDF

Influence of stiffeners on the performance of blind-bolt end-plate connections to CFST columns

  • Ding, Fa-xing;Pan, Zhi-cheng;Liu, Peng;Huang, Shi-jian;Luo, Liang;Zhang, Tao
    • Steel and Composite Structures
    • /
    • 제36권4호
    • /
    • pp.447-462
    • /
    • 2020
  • The paper aims to investigate the mechanical mechanism and seismic effect of stiffeners in blind bolt endplate connection to CFST column. A precise 3D finite element model with considering the cyclic properties of concrete and steel materials was established, and the efficiency was validated through monotonic and cyclic test data. The deforming pattern and the seismic performance of the unstiffened and stiffened blind bolt endplate connections were investigated. Then a parametric analysis was conducted to analyze the contribution of stiffeners and the joint working behaviors with endplate under cyclic load. The joint stiffness classifications were compared and a supplement stiffness classification method was proposed, and the energy dissipation ability of different class connections were compared and discussed. Results indicated that the main deformation pattern of unstiffened blind bolt endplate connections was the local bending of end plate. The vertical stiffeners can effectively alleviate the local bending deformation of end plate. And influence of stiffeners in thin endplate and thick endplate was different. Based on the stiffness of external diaphragm welded connection, a more detailed rigidity classification was proposed which included the pin, semi-rigid, quasi-rigid and rigid connection. Beam was the main energy dissipation source for rigid connection. For the semi-rigid and quasi-rigid connection, the extended endplate, stiffeners and steel beam would all participate in the energy dissipation.

패류로부터 젖산 세균의 분리 및 특성 (Identification and Characteristics of Lactic Acid Bacteria Isolated from Shellfishes)

  • 강창호;정호건;구자룡;전은진;곽대영;홍채환;김시환;서지연;한도석;소재성
    • KSBB Journal
    • /
    • 제27권3호
    • /
    • pp.151-156
    • /
    • 2012
  • Lactic acid is an important product arising from the anaerobic fermentation by lactic acid bacteria (LAB). It is used in the pharmaceutical, cosmetic, chemical, and food industries as well as for biodegradable polymer and green solvent production. The poly lactic acid (PLA) is an important material for bio-plastic manufacturing process. For PLA production by new LAB, we screened LAB isolates from shellfish. A total of 28 LAB were isolated from various shellfishes. They were all Gram positive, oxidase and catalase negative. Based on API 50CHL kit, 7 strains among the 28 isolates were identified as Lactobacillus plantarum, 6 strains as Lactobacillus delbrueckii, 5 strains as Leuconostoc mesenteroides, 3 strains as Lactobacillus brevis, 2 strains as Lactococcus lactis, 1 strain as Lactobacillus salivarius, 1 strain as Lactobacillus paracasei, 1 strain as Lactobacillus pentosus, 1 strain as Lactobacillus fermentum and 1 strain as Pediococcus pentosaceu. Also, we examined the amount of total lactic acid produced by these new strains by HPLC analysis with Chiralpak MA column. One strain E-3 from Mytilus edulis was indentified as Lactobacillus plantarum and found to produce 20.0 g/L of D-form lactic acid from 20 g/L of dextrose. Further studies are underway to increase the D-lactic acid production by E-3.

A case study of damage detection in four-bays steel structures using the HHT approach

  • Hsu, Wen-Ko;Chiou, Dung-Jiang;Chen, Cheng-Wu;Liu, Ming-Yi;Chiang, Wei-Ling;Huang, Pei-Chiung
    • Smart Structures and Systems
    • /
    • 제14권4호
    • /
    • pp.595-615
    • /
    • 2014
  • This study aims to investigate the relationship between structural damage and sensitivity indices using the Hilbert-Huang transform (HHT) method. Two damage detection indices are proposed: the ratio of bandwidth (RB), and the ratio of effective stiffness (RES). The nonlinear four bays multiple degree of freedom models with various predominant frequencies are constructed using the SAP2000 program. Adjusted PGA earthquake data (Japan 311, Chi-Chi 921) are used as the excitations. Next the damage detection indices obtained using the HHT and the fast Fourier transform (FFT) methods are evaluated based on the acceleration responses of the structures to earthquakes. Simulation results indicate that, the column of the 1 st floor is the first yielding position and the RB value is changed when the RES<90% in all cases. Moreover, the RB value of the 1 st floor changes more sensitive than those from the top floor. In addition, when the structural response is nonlinear (i.e., RES<100%), the RB and the RES curves indicate the incremental change in the HHT spectra. However, the same phenomenon can be found from FFT spectra only when the stiffness reduction is large enough. Therefore, the RB estimated from the smoothed HHT spectra is an effective and sensitive index for detecting structural damage.

Seismic performance of moment connections in steel moment frames with HSS columns

  • Nunez, Eduardo;Torres, Ronald;Herrera, Ricardo
    • Steel and Composite Structures
    • /
    • 제25권3호
    • /
    • pp.271-286
    • /
    • 2017
  • The use of Hollow Structural Sections (HSS) provides an alternative for steel buildings in seismic zones, with the advantage over WF columns that the HSS columns have similar resistance along both axes and enhanced performance under flexure, compression and torsion with respect to other columns sections. The HSS columns have shown satisfactory performance under seismic loads, such as observed in buildings with steel moment frames in the Honshu earthquake (2011). The purpose of this research is to propose a new moment connection, EP-HSS ("End-plate to Hollow Structural Section"), using a wide flange beam and HSS column where the end plate falls outside the range of prequalification established in the ANSI/AISC 358-10 Specification, as an alternative to the traditional configuration of steel moment frames established in current codes. The connection was researched through analytical, numerical (FEM), and experimental studies. The results showed that the EP-HSS allowed the development of inelastic action on the beam only, avoiding stress concentrations in the column and developing significant energy dissipation. The experiments followed the qualification protocols established in the ANSI/AISC 341-10 Specification satisfying the required performance for highly ductile connections in seismic zones, thereby ensuring satisfactory performance under seismic actions without brittle failure mechanisms.

크로마토그래피용 O-Diethylaminoethyl Chitosan의 합성; I. 단백질의 분리 (Synthesis of O-Diethylaminoethyl Chitosan for Chromatography; I. Separation of Protein)

  • 박창규;이영무;김진홍;정창남
    • 공업화학
    • /
    • 제4권3호
    • /
    • pp.583-590
    • /
    • 1993
  • 키토산 유도체 중 약한 음이온 교환기를 갖는 O-Diethylaminoethyl 키토산을 제조하여, 이를 크로마토그래피의 고정상으로 이용하여 생체단백질의 하나이며 등전점이 서로 다른 알부민과 라이소자임의 분리에 응용하였다. 우선 산성 염료와 염기성 염료를 이용하여 고정상으로서의 응용 가능성을 검토하였고 용매에 의한 극성효과도 검토하였다. 이것을 토대로 하여 크로마토그래피의 분리에 미치는 제반인자를 구하였다. 용매로써는 물과 메탄을 공용매를 사용하였고 이 경우 극성값이 증가할수록 분리능이 증가하였으며 가장 좋은 분리능은 치환도가 0.23인 경우 분리도가 1.42였다.

  • PDF

Warm Dust and Gas of Massive YSOs Revealed by Herschel PACS Spectroscopy

  • 권우진
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.41.3-41.3
    • /
    • 2015
  • As part of the Herschel key program "Water in Star-forming Regions with Herschel (WISH)", PACS imaging spectroscopy data have been taken toward ten massive young stellar objects (YSOs): four high mass protostellar objects (HMPOs), two hot molecular cores (HMCs), and four ultracompact HII regions (UCHIIs). The spectra cover a broad range of wavelengths (55 to 210 micron) presenting various atomic and molecular lines as well as excellent dust thermal continua. By fitting the continua utilizing a modified black-body formula we estimate mass-weighted temperature and column density distributions of warm dust and find that UCHII regions are warmer and HMCs are more deeply embedded than the other types. We also estimate rotational temperature and column density distributions of warm CO gas using the rotational diagram analysis. In addition, based on the comparison of high J CO line fluxes to the RATRAN estimates of central heating envelope models, we find that majority of warm CO is originated from bipolar outflow shocks.

  • PDF

A New Method for Creating a Definite Philtrum by the Flipping of an Orbicularis Oris Muscle Flap in a Patient with an Indistinct Philtrum

  • Choi, Hyun Nam;Kim, Sin Rak;Han, Yea Sik
    • Archives of Plastic Surgery
    • /
    • 제40권1호
    • /
    • pp.62-65
    • /
    • 2013
  • The philtrum plays a key role in the appearance of the upper lip and nostril sill. Therefore, construction of the philtrum is crucial for attaining a natural appearance of the upper lip. We used a flipping myoplasty of the orbicularis oris muscle on a patient with a flat philtrum in order to effectively reconstruct the philtral dimple and column. A 35-year-old female presented to our department with the complaint of a flat upper lip. A superficial layer of the orbicularis oris muscle on the median aspect of the upper lip was vertically incised and elevated to a thickness of 2 mm. Both sides of the elevated muscle flap were then folded to the lateral sides so that the border could be sutured onto the outer portion of the orbicularis oris muscle. The patient was observed for one year postoperatively. Her philtrum deepened by 1.25 mm, with the central angle of her Cupid's bow improving from a preoperative measurement of $146^{\circ}$ to $128^{\circ}$ postoperatively. In a patient with an indistinct philtrum, a flipping orbicularis oris myoplasty was performed to attain a definite philtral column and a philtral dimple. Natural upper lip movement was maintained, and an aesthetically and functionally satisfactory reconstruction was achieved.

Isolation and Identification of Nonpolar Taxane Derivatives from the Plant Cell Culture of Taxus chinensis

  • Gi, Un-Sook;Min, Bumchan;Hong, Seung-Suh;Lee, Hyun-Soo;Kim, Jin-Hyun
    • Journal of Applied Biological Chemistry
    • /
    • 제43권3호
    • /
    • pp.176-179
    • /
    • 2000
  • Nonpolar taxoides extracted from a large-scale cell culture of Taxus chinensis were isolated through the normal and reverse phase column chromatographies, and their compounds were identified via NMR spectroscopy. The complete separation method was systematically established and described. In dichloromethane, dissolved paclitaxel and other taxoids with hexane were precipitated during the purification of paclitaxel from the plant cell culture of T. chinensis through a large-scale process while the relatively nonpolar taxane derivatives remained dissolved in the hexane phase. 13-Deoxy baccatin III (I), baccatin VI (II), taxchinin I (III), $2{\alpha}$, $5{\alpha}$, $10{\beta}$, $14{\beta}$-tetraacetoxy-4(20), 11-taxadiene(IV), 1-deoxy baccatinVI(V), and taxayuntin C (VI) were isolated through column chromatography and identified via NMR spectroscopy. Compounds I and IV were found to the major components, aside from paclitaxel, in the plant cell culture of T. chinensis. The concentrations of I and IV were compared with the that concentration of the paclitaxel in each of plant cell culture. The possible applications of compounds I, II, IV, and V were discussed.

  • PDF

오매 추출물에 함유된 Ursolic Acid에 의한 Helicobacter pylori의 Urease 활성억제 (Ursolic Acid Isolated from Mume Fructus Inhibits Urease Activity of Helicobacter pylori)

  • 박찬엘;박창호
    • Korean Chemical Engineering Research
    • /
    • 제51권5호
    • /
    • pp.591-596
    • /
    • 2013
  • 전통식물한약재에 대한 데이터베이스, 한국식물자원에 대한 문헌 및 선행연구 결과에 근거해 선정한 6가지의 식물 한약재(연교, 소목, 형개, 황련, 소엽, 오매)의 에탄올(70%) 추출물 중에서 오매 추출물이 Helicobacter pylori의 urease 활성에 가장 강한 억제력을 나타내었다. 극성이 다른 용매를 사용한 회분식 용매추출과 칼럼 크로마토그래피를 이용한 3단계 분리공정을 통하여 오매 추출물에 함유된 유효성분을 분리 정제하였다. NMR 분석에 의해 정제된 오매 추출물에 함유된 활성성분이 ursolic acid로 확인되었다. 본 실험결과는 오매에 함유된 이 성분이 항생제를 대신하여 H. pylori 제거에 활용될 수 있음을 시사하였다.