• 한국가축번식학회지
• /
• 제18권4호
• /
• pp.245-250
• /
• 1995

The appearance and function of corpora lutea(CL) with a central cavity in the ovaries of Korean Native Cattle (KNC) were investigated endocrinologically and histochemically. The CL were enucleated from KNC ovaries within 2~3 hrs local slaughter house and classified with central cavity CL or not. Enzymatically dispersed luteal cell (1$\times$106 live cell/ml of Dulbecco's Modified Eagle Media) with or without cavity of CL cultured at 37$^{\circ}C$ in a humidified incubation (5% CO2 : 95% air) for 72hr. A central cavity in the CL of KNC was found in 58.8% of CL-1, 34.9% of CL 2, 39.1% of CL-3, and 11.1% of CL-4, respectively. There were no significant difference between protein content of CL with and without a central cavity. Mean progesterone secretion after 36h of in vitro luteal cell culture were significantly (p<0.05) higher in CL with central cavity than without cavity. However, the luteal cavitic wall was composed of the connective tissue band of the reticular and collagen fibers and then these connective tissue band extended into the CL with cavity. These results suggest that the central cavity of CL may be caused infertility in KNC.

• 한국가축번식학회지
• /
• 제26권1호
• /
• pp.73-78
• /
• 2002

젖소 난소 황체에 있어서 중심강의 유무에 따른 황체 조직 중의 total protein, DNA 및 RNA 함량을 조사하여 중심강이 있는 황체와 중심강이 없는 황체간의 기능성을 구명하고자 수행한 시험에서 다음과 같은 결과를 얻었다. 1. 중심강이 없는 황체의 total, supernatant 및 Pellt protein의 함량은 각각 32.83, 16.87 및 15.96 mg/g wet tissue이었고, 중심강이 있는 황체의 그것들은 각각 29.62, 16.10 및 13.52 mg/g wet tissue으로서 중심강이 없는 황체와 중심강이 있는 황체간에 유의적인 차이를 나타내지 않았다(p〉0.05). 2. DNA 함량은 중심강이 없는 황체가 1.99mg/g wet tissue이었고 중심 강이 있는 황체가 1.32mg/g wet tissue으로 중심강이 없는 황체와 있는 황체간에 유의적인 차이(p＜0.05)를 나타내었다. Protein : DNA ratios에 있어서도 중심강이 없는 황체가 16.63mg/g wet tissue이었고 중심강이 있는 황체가 22.99mg/g wet tissue으로 중심강이 없는 황체와 중심강이 있는 황체간에 유의적인 차이(p＜0.05)를 나타내었다. 3. 중심강이 없는 황체의 RNA함량, Protein: RNA 및 RNA:DNA ratios는 각각 2.87, 12.24및 1.43mg/g wet tissue이었고, 중심강이 있는 황체의 그것들은 각각 2.47, 13.73 및 1.89mg/g wet tissue으로서 중심강이 없는 황체와 중심강이 있는 황체간에 유의적인 차이를 나타내지 않았다(p〉0.05).

• Journal of Oral Medicine and Pain
• /
• 제6권1호
• /
• pp.101-110
• /
• 1981

For the purpose of an estimation of age based on the changes in the human dental cavity caused by increase in age, 1,208 extracted teeth in the parts from central incisors and lateral incisors and lateral incisors to second premolars of upper and lower, right and left side were evaluated and analized all of surface index of pulp cavity. The results are as follows : 1. The surface index of pulp caxities of upper and lower, central and lateral incisors, and tend to decrease regularly as the age increase. So above teeth are more applicable to age estimation than canine and premolars. 2 For the purpose of age estimation by surface index of pulp cavity of central and lateral incisor, linear equations are as follows. Upper central incisor: X=(16.301-Y)/0.12 Upper lateral incisor: X=(16.620-Y)/0.11 Lower central incisor: X=(20.963-Y)/0.16 X=Age Y=Surface index of pulp cavity Correlation coefficient between chronologic age and estimated age is 0.699 3.The least error(3.3 yrs of age)reveals in 41-45 age group, which shows the highest possibility of estimation of age. The highest error(4.1 yrs of age)reveals in 61-65 age group and 56-60 age group.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.527-536
• /
• 2020

An elastic-plastic solution for cavity expansion problem considering strength degradation, undrained condition and initial anisotropic in-situ stress is established based on the Tresca yield criterion and cavity expansion theory. Assumptions of large-strain for plastic region and small-strain for elastic region are adopted, respectively. The initial in-situ stress state of natural soil mass may be anisotropic caused by consolidation history, and the strength degradation of soil mass is caused by structural damage of soil mass in the process of loading analysis (cavity expansion process). Finally, the published solutions are conducted to verify the suitability of this elastic-plastic solution, and the parametric studies are investigated in order to the significance of this study for in-situ soil test.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.309-316
• /
• 2017

In injection molding, the quality of an injection molded product varies greatly depending on the molding conditions. Many researche studies have been conducted on the quality analysis of molded parts according to the molding conditions such as injection pressure, injection temperature, and packing pressure. However, there have not been many studies on the V/P switchover timing. It is known that when a large pressure is applied to a cavity in the packing phase, the cavity pressure is most affected by the packing pressure. In addition, depending on the position (timing) of the packing pressure, it can have a direct influence on quality based on the shrinkage and dimensions of the molded parts. In this study, the change in pressure profile in the cavity according to the V/P switchover position is confirmed. A CAE analysis program (Moldflow) was used to simulate and analyze two models using the PC and PBT materials. In order to compare these results with the actual injection molding results, injection molding was performed for each V/P switchover position, and the correlation between simulation and experiment, especially for the shrinkage of molded parts, was evaluated.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.103-117
• /
• 1981

The data about dental caries obtained from 1438 preschool children (male 797, female 641) in Seoul aged from 3 to 6 were analyzed by their sexes, ages, jaws and teeth surfaces. The results were as follows. 1. dmf rate : 92.63% 2. dmft index : 6.06 dmft rate 30.81 % dmfs index : 11.82 dmfs rate 12.02 % 3. d,m & f rate d rate: 79.45% m rate: 8.15% f rate : 12.40 % 4. dft index : 5.94 5. The order of caries susceptible tooth 1. Lower deciduous 2nd molar 2. Lower deciduous 1st molar 3. Upper deciduous 2nd molar 4. Upper deciduous lateral incisor 5. Upper deciduous cental incisor 6. Upper deciduous lateral incisor 7. Lower deciduous canine 8. Upper deciduous canine 9. Lower deciduous central incisor 10. Lower deciduous lateral incisor 6. Predilection sites of each tooth A) Deciduous central incisor ; Max. : Mesial cavity Mand. : Mesio-distal cavity B) Decidous lateral incisor ; Max. : Mesial cavity Mand. : Distal cavity=Mesial cavity C) Deciduous canine; Max. : Labial cavity Mand. : Distal cavity D) Decidous 1st molar ; Max. : Disto-occlusal cavity Mand.: Disto-occlusal cavity E) Deciduous 2nd molar ; Max. : Linguo-occlusal cavity Mand.: Occlusal cavity 7. All the values in caries criteria in 1981 were somewhat lower than in 1968, but m & f rate were increased.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.513-522
• /
• 2019

This study presents an elasto-plastic (EP) solution for drained cavity expansion on the basis of unified strength failure criterion and considers the influence of initial stress state. Because of the influence of initial consolidation of soil mass, the initial stress may be anisotropic in the natural soil mass. In addition, the undrained hypothesis is usually used in the calculation of cavity expansion problem, but most of the cases are in the drained situation in practical engineering. Eventually, the published solution and the presented solution are compared to verify the suitability of the study.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.1-9
• /
• 2019

In this study, both 2D and 3D failure shapes of rock mass above the water-filled cavity are put forward when the surrounding rock mass cannot bear the pressure caused by the water-filled cavity. Based on the analytical expressions derived by kinematic approach, the profiles of active and passive failure patterns are plotted. The sensitivity analysis is conducted to explore the influences of different rock parameters on the failure profiles. During the excavation of the deep tunnels above the karst cavity, the water table always changes because of progressive failure of cavity roof. Therefore, it is meaningful to discuss the effects of varying water level on the failure patterns of horizontal rock layers. The changing laws of the scope of the failure pattern obtained in this work show good consistency with the fact, which could be used to provide a guide in engineering.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2197-2202
• /
• 2011

본 논문에서는 중공을 가지는 짧은 치과용 임플란트의 생체역학적인 특성을 3차원 유한요소해석을 통하여 분석하였다. 고려된 치과용 짧은 임플란트는 골유착성을 향상시키기 위해 트리패닝 드링 등에 의해 남겨진 치골과 결합될 수 있는 중공부를 가진다. 연구를 위해 Bicon사의 길이가 짧은 임플란트를 기본 모델로 삼아 중공부가 임플란트 주변 치골의 응력분포에 주는 영향을 분석하였다. 중공부 길이, 직경 및 나사산 등의 형상변수에 따른 반복적인 유한 요소해석을 효과적으로 수행하기 위하여 ANSYS APDL을 이용하여 매개변수화된 유한요소모델을 구성하였다. 해석결과 중공부를 가지는 경우 특히 경사하중 하에서 해면골에서 발생하는 최대응력값이 크게 감소하였으며, 중공부의 형태가 해면골에서의 응력분포에 큰 영향을 주는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.347-360
• /
• 2017

The problem of cylindrical cavity expansion incorporating deformation dependent of intermediate principal stress in rock or soil mass is investigated in the paper. Assumptions that the initial axial total strain is a non-zero constant and the axial plastic strain is not zero are defined to obtain the numerical solution of strain which incorporates deformation-dependent intermediate principal stress. The numerical solution of plastic strains are achieved by the 3-D plastic potential functions based on the M-C and generalized H-B failure criteria, respectively. The intermediate principal stress is derived with the Hook's law and plastic strains. Solution of limited expansion pressure, stress and strain during cylindrical cavity expanding are given and the corresponding calculation approaches are also presented, which the axial stress and strain are incorporated. Validation of the proposed approach is conducted by the published results.