• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.170-176
• /
• 2016

Purpose: This study aimed to improve the method for determining the position of the center of gravity for agricultural tractors. Methods: The proposed method uses trigonometric functions and coordinate transformation. Data were measured according to the ISO 789-6 test procedures for the center of gravity of agricultural tractors. The height calculated using the proposed method was compared with that determined from an AutoCAD drawing. To find the center of gravity of the tractor, the algorithm for finding the intersection of the two lines was used. Results: The vertical height from the ground to the center of gravity is 682.06 mm. The vertical coordinates obtained from the calculation and the drawing were the same. Conclusions: The developed method uses trigonometric and polar coordinate transformation. The method was compared and verified with the AutoCAD drawing results. The results indicate that users can apply this developed method instead of the plotting method which is an inconvenient and time-consuming. Further, users can program Microsoft Excel to easily determine the vertical coordinate. In addition, researchers will propose this method to the ISO as a standard method for determining the center of gravity in accordance with ISO 789-6.

• 한국수학사학회지
• /
• 제26권5_6호
• /
• pp.371-388
• /
• 2013

In ${\ll}$The Method${\gg}$, Archimedes presented the famous heuristic technique for calculating areas, volumes and centers of gravity of various plane and solid figures, utilizing the law of the lever. In that treatise, Archimedes used the fact that the center of gravity of a cone lies one-quarter of the way from the center of the base to the vertex, but the proof of this is not extant in his works. This study analyzes the propositions and their relations of ${\ll}$The Method${\gg}$ focusing on the procedural characteristics of the 'method' of Archimedes. According to the result of that analysis, this study discusses the likely approach which was taken for Archimedes to find out the center of gravity of a cone.

• The Journal of Korean Physical Therapy
• /
• 제5권1호
• /
• pp.61-69
• /
• 1993

It was performed to encourage for Physical Therapist to apply the theory of center of the human body and segments in clinical situations. This study was investigated literarily on center of the human body and segments. Methods which search for the center-2 types, that is, method using reaction broad and segmental method-was suggested. The center location difference of gravity in human body depends on individual character. Generally, the center location is in kent of 2nd sacrum, that is, at $55\%$ of height from foot. The center of each segment is on 'link'. In the first place we must how the weight of segment we can search for the center easily. Mean segment coater location of extremities is at $42.33\%$ from each proximal end, and mean center of head and trunk lies at $45\%$.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.41-47
• /
• 2010

There are many unbalanced models such as helicopter's rotor blades, small-sized precision motor in industrial applications. In the real products, their gravity center usually does not accord with the desired gravity center. If the deviation is large between them, it can be a major cause of vibration and noise as the part of model rotate. Therefore the gravity center in the rotational parts should be controlled properly because of static and dynamic balancing of the parts. In the research, the rotor blade of unmanned helicopter has been selected to obtain the high quality of balancing. In order to achieve the purpose, measuring system has been developed. In the system applied principle is three point weighting method, which is one of the Multiple-point Weighting Method. It has circle fitting for compensation of machining error, after measuring the values. From this study, the results showed that the proposed measurement procedure gives reliable and precise gravity center.

• Structural Monitoring and Maintenance
• /
• 제11권3호
• /
• pp.235-246
• /
• 2024

Structural seismic tests usually need to simulate the gravity load borne by the structure, the gravity load application devices should keep the force value and direction unchanged, and can adapt to the structural deformation. At present, there are two main ways to simulate gravity load in laboratory: roller group and prestress. However, there are few differential analysis between these two ways in the existing experimental studies. In this paper, the simulation software ABAQUS is used to simulate the static pushover analysis of reinforced concrete column and frame, which are the most common models in structural seismic tests. The results show that the horizontal restoring force of the model using prestressed loading method is significantly greater than roller group, and the difference between the two will increase with the increase of the horizontal deformation. The reason for the difference is that the prestressed loading method does not take the adverse effects of gravity second-order effect (P-Delta effect) into account. Therefore, the restoring force obtained under prestressed loading method should be corrected and the additional shear force caused by P-Delta effect should be deducted. After correction, the difference of restoring force between the two gravity load application methods is significantly reduced (when storey-drift is 1/550, the relative error is within 1%; and when storey-drift is 1/50, the relative error is about 3%). The research results of this research can provide reference for the selection and data processing of gravity load simulation devices in structural seismic tests.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.285-299
• /
• 2004

The purpose of this study is to identify female 500m sprint start motion by the center of gravity position in short track speed skating. The center of gravity position ratio was divided into three type(type A front : 80%-back : 20%, type B front : 70%-back 30%, type C front: 50%-back : 50%). Three video cameras were used for 3D motion analysis with DLT method and the results were as follows: The elapsed time in starting motion was appeared that type B was the shortest and type A was the longest. It was appear that the stroke length of type A was longer than that type B and C during starting phase. This result was similar to displacement of center of gravity. It was appeared that skill type of center of gravity position ratio type B' ankle and knee joint angle were lower than that of type A and C. Observing these results it was conclusion that skill type B of center of gravity position ratio was more faster than that of type A and C. But it is important that these skill type needed to verifying more subjects.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.496-501
• /
• 2012

An equilibrium point of a WIP (Wheeled Inverted Pendulum) with changing its center of gravity is derived and validated by various numerical simulations. Generally, the WIP has two equilibrium points which are unstable and stable one. The unstable one is interested in this study. To keep the WIP over the unstable equilibrium point, the WIP is consistently being adjusted. A state feedback controller for the WIP needs a control reference for the equilibrium point. The control reference can be obtained by studying an equilibrium point of the WIP based on statics. By using Lagrange method, this study is deriving dynamic equations of the WIP both with and without changing its center of gravity. Various numerical simulations are carried out to show the validation of the equilibrium point.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.541-542
• /
• 2009

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.199-215
• /
• 2003

The purpose of this study was to attempt new starting motion and supply present starting motion in the 500M short track speed skating according to the center of gravity position. The center of gravity position ratio was divided starting motion into five(type A : front 80%-back 20%, type B front 70%-back 30%, type C : front 50%-back 50%, type D : front 30%-back 70%, type E : front 20%-back 80%). The three dimension motion analysis with DLT(direct linear transformation) method was executed using two video cameras. The following conclusion was that It was appear that reaction and execution time in starting motion was the most short in type B. It was characteristic that step of skaters was shorten and center of gravity position ratio was not effect to change of the step in each event. It was appear that the displacement of type D and type E were longer than that type A and type B during the starting motion. It was appear that skill types of center of gravity position ratio to the front were lower than that to the back and contract a posture. Observing the above, it was conclusion that skill type B of center of gravity position ratio to the tent was more effect than that to the back. But it is important that these skill type was most used to the competition and estimate the result.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제20권4호
• /
• pp.621-634
• /
• 2006

In this study we describe the characteristics of solving geometry problems related with the ratio of segments using the principle of the lever and the center of gravity, compare and analyze this problem solving method with the traditional Euclidean proof method and the analytic method.