• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.876-883
• /
• 2023

Radioactive waste should be solidified before being disposed of in the repository to eliminate liquidity or dispersibility. Cement is a widely used solidifying media for radioactive waste, and cement solidified waste should satisfy the minimum compressive strength of the waste acceptance criteria of a radioactive repository. Although the compressive strength of waste should be measured by the test method provided by the waste acceptance criteria, the method differs depending on the operating repository of different countries. Considering the measured compressive strength changes depending on test conditions, the effect of test conditions should be analyzed to avoid overestimation or underestimation of the compressive strength during disposal. We selected test conditions such as the height-to-diameter ratio, loading rate, and porosity as the main factors affecting the compressive strength of cement solidified radioactive waste. Owing to the large variance in measured compressive strength, the effects of the test conditions were analyzed via statistical analyses using parametric and nonparametric methods. The results showed that the test condition of the lower loading rate, with a height-to-diameter ratio of two, reflected the actual cement content well, while the porosity showed no correlation. The compressive strength assessment method that reflects the large variance of strengths was suggested.

• 산업기술연구
• /
• 제30권A호
• /
• pp.37-43
• /
• 2010

Polymeric materials in addition to Portland cement and hydrated limes were used to solidify heavy metal contaminated tailings from five abandoned metal mines in Korea. Mine tailings were mixed separately with Portland cement and hydrated lime at a concentration of 20-30 wt% and 6-9 wt%, respectively and Ethylene Vinyl Acetate(EVA) powder was added to each specimen at a ratio of 2.5 and 5.0 wt% to binders. Polymer-added and polymer-free solidified forms were evaluated for their appropriateness in accordance with the suggested test methods. Regardless of addition of polymeric materials, all solidified forms satisfy the uniaxial compressive strength(UCS) requirements(0.35MPa) for land reclamation and show remarkably reduced leaching concentrations of heavy metals such as As, Cd, Cu, Pb and Zn less than the toxicity criteria of Korean standard leaching test(KSLT). The addition of polymeric materials increased the UCS of solidified forms to improve a long-term stability of solidified mine tailings.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.32-37
• /
• 2003

한국원자력연구소에서 약 4,500드럼 규모의 토양폐기물을 임시로 보관하고 있다. 이를 안전하게 처리하기 위한 고화기술 개발이 필요함에 따라 시멘트와 폴리머를 선정하여 시험을 수행하였다. 이를 위해 토양폐기물에 시멘트와 폴리머를 적절히 혼합하여 고화시편을 제조하였으며, 저장에 따른 처분기준 만족여부를 평가하기 위하여 압축강도시험과 침출시험을 수행하였다. 폐기물함량이 40%인 시멘트고화체와 65%인 폴리머고화체의 압축강도가 약 5,300psi로서 유사하였으며, 침출지수는 11 이상으로서 모든 시편에서 기준치를 만족하였다. 고화과정의 균질한 혼합여부와 시편의 다짐상태가 고화체의 건전성에 큰 영향을 미치는 것으로 확인되었다. 감용효과는 폴리머고화체가 시멘트고화체에 비해 20% 정도 우수한 것으로 평가되었다.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.