• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.8-15
• /
• 1996

Three pieces of cotton fabrics used for this study were exhumed in the Mt.Moo Deung near Kwang Ju in 1965. The fabrics were remains of Jang Heung Lim Si-the nephew's wife of General Kim Deok Ryeong. It was reported that Jang Heung Lim Si died in 1615. The cotton fabrics were classified into three, A, B and C, according to their color. The fabric A was inherent color of cotton, the fabric B was that of light brown and the fabric C was that of dark brown. The physical and chemical characteristics of the cotton fabrics were examined. In the meantime the construction of cotton fabrics and traditional dyeing of Yi dynasty were studied through various records. The results were as follows: 1. According to electromicroscopic examination, the lumen in the cotton fiber had not been developed enough, therefore the quality of cotton at that time was supposed to be not so excellent. 2. The results of chemical analysis indicated that: (1) While the copper number of the cotton fabric A was similar to that of bleached cotton, that of the fabric C was extremely high. (2) The amount of methylene blue absorption was much more than that of normal cotton. (3) The content of cellulose was less than that of normal cotton. (4) The degree of polymerization was less than that of normal cotton. From the results mentioned above, it was concluded that the cotton fabrics were oxidized slowly in the closed lime coffin for a long period of time. From this process of oxidization and deterioration, the degree of polymerization was decreased through depolymerization, and carboxyl groups were produced by the oxidization at reducing end groups. 3. It was confirmed that the cotton fabric C was dyed by the juice of immature persimmon. Thus, it was inferred that the large amount of copper number of cotton fabric C was derived from phenolic OH groups of tannins having high reducing properties in persimmon.

• Membrane Journal
• /
• v.31 no.4
• /
• pp.241-252
• /
• 2021

Rapid industrialization with growing population leads to environmental water pollution. Demand in generation of clean water from waste water is ever increasing by scarcity of rain water due to change in weather pattern. Colorimetric detection of heavy metal present in clean water is very simple and effective technique. In this review membrane based colorimetric detection of mercury (II) ions are discussed in details. Membrane such as cellulose, polycaprolactone, chitosan, polysulfone etc., are used as support for metal ion detection. Nanofiber based materials have wide range of applications in energy, environment and biomedical research. Membranes made up of nanofiber consist up plenty of functional groups available in the polymer along with large surface area and high porosity. As a result, it is easy for surface modification and grafting of ligand on the fiber surface enhanced nanoparticles attachment.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.163-167
• /
• 2022

Bio-based alternative leathers may be produced from biomass fiber, protein polymers, bacterial cellulose, and mushroom mycelia. Of these components, mushroom mycelia are of greatest interest. In this study, the potential of Fomes fomentariusas a mushroom mycelial mat was confirmed, and the optimal strain for the development of the mycelial mat was determined. Moreover, the quality of the mycelial mat was improved by identifying an efficient culture method to increase productivity. Mutant strains whose independence was verified were obtained by treatment with gamma irradiation under various conditions. Biofilm formation by the resulting strains was examined in sawdust and liquid media and the characteristics of the biofilms were analyzed. The biofilm of the mutant strains showed results that were similar to or better than the biofilms of longevity and cypress mushrooms. These findings are expected to be utilized in future research aimed at discovering new biomaterials using mushroom mycelia.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.801-811
• /
• 2022

In this study, we constructed a database of dyeing concentrations of all reactive dyes used for dyeing linen according to the thickness of the linen fabric and attempted to improve the reproducibility of the dyeing process for the commercialization of linen fabric materials. Linen fabric is a natural cellulose material that is comfortable and suitable for eco-friendly trends. It is a typical summer material with excellent breathability and thermal conductivity, quick moisture absorption and dissipation, and a cool touch. Dyeability and fastness were evaluated depending on the thickness of the linen fabric using a monochlorotriazine (MCT) reactive dye and bifunctional yellow, red, and blue dyes. All three colors of the MCT reactive dye and bifunctional dyes exhibited a darker shade as the fiber thickness of the marker increased. Fastness to washing was excellent at grades 4-5 or higher, regardless of the color of the dye and the number of linen fabrics. Although some color-fastness differences were noted, with the color change occurring most frequently with blue color, the fastness variations with dye type were mostly similar. The results of this study are expected to facilitate the selection of reactive dyes according to the thickness of the linen fabric based on the basic data from the laboratory, which will aid in the mass production of linen fabric and benefit the fashion industry.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.133-138
• /
• 2023

This paper presents a discussion on lubricating oil filters. The maintenance of lubricating oil filters can improve the performance of mechanical systems and extend the service life of the lubricating oil. Therefore, the effective management of the lubricating oil can extend the service life of the machine and reduce maintenance costs. A representative method for managing lubricating oil is filtering the lubricating oil using a lubricant filter. However, effectively managing a lubricating oil using a lubricant filter requires an understanding of the related knowledge. In this paper, we present the definition, classification, characteristics, specifications, performance, and self-cleaning function of lubricating oil filters. The lubricant filters are classified based on the filter material, filtering method, filtering location, and amount of filtered fluid. Cellulose and glass fiber materials are conventionally used as materials for lubricant filters, and recently, metal materials, which show excellent durability, are being increasingly adopted. The filtering methods can be classified into physical, chemical, magnetic, and electric field methods, and the lubricant filters can be classified according to their location in the lubrication system. The beta ratio and efficiency of the lubricant filter can be determined based on the performance of the filter. Finally, there are many products or technologies that add a self-cleaning function to the filter to remove foreign substances or contaminants for efficient management.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.501-508
• /
• 2023

Addressing urban noise problems, this study develops eco-friendly, inorganic sound-absorbing panels, overcoming the limitations of traditional PMMA and cement-based panels. These conventional panels pose safety risks due to flammability and environmental concerns due to carbon emissions. Utilizing industrial waste, the research comprises two phases: initial tests for physical and performance characteristics (fluidity, density, compressive strength, sound absorption) and subsequent development of optimized panel mixtures. This approach aims to replace existing panels with sustainable, effective alternatives, significantly contributing to safer, environmentally responsible urban infrastructure. The findings of this study have implications for the sound panel market, offering novel solutions for noise control while aligning with environmental and safety standards.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.213-224
• /
• 2020

This research conducted a component analysis and conservation treatment of "Sangryangmun," a material which had been written in 1965 and was discovered during the repair project for "Jinnamgwan" in Yeosu. The "Sangryangmun" has been stored in a cylindrical metal storage; however, defects, discolorations, hardening, and damages caused by pollutants were found. Based on the XRF analysis, rust in the cylindrical metal storage, which was made of Cu, was stuck on the surface of the "Sangryangmun". Using FT-IR and Pyrolysis-GC/MS analyses, carbonyl and compounds of fatty acids were detected; the organic material on the surface of the "Sangryangmun" was identified to have belonged to oil-based components. Therefore, it was presumed that the bast fibers of a mulberry was used in the paper. To determine the conservation materials, component analysis, condition survey, and preliminary test on adhesives were conducted. Moreover, the missing parts and partial linings were filled using mulberry-fiber paper, methyl cellulose, etc.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.818-822
• /
• 2003

In order to investigate the effect of different sources of energy on intake and nutrient utilization from urea molasses mineral block (UMMB), rumen fermentation pattern and blood biochemical constituents, 18 intact and 9 rumen fistulated male Murrah buffaloes aged about 3 years and average weight 310.8 kg were randomly allocated into three groups of 9 animals in each, thus each group having 6 intact and three rumen fistulated buffaloes. All animals were fed individually for 90 days. All buffaloes were offered wheat straw as basal roughage and urea molasses mineral block for free choice of licking. Three different energy sources viz., barley grain, (group I), maize grain (group II) and jowar green (group III) were offered to meet their nutrient requirement as per Kearl (1982). At the end of feeding trial, a metabolism trial of 7 days duration was carried out on intact animals to determine the digestibility of nutrients. Rumen fermentation studies were carried out on rumen fistulated animals. After the metabolism trial blood was collected from intact animals to estimate the nitrogen constituents in blood serum of animals fed on different sources of energy. Results revealed no significant difference in the intake of UMMB in three groups. Similarly, the intake of DM (kg), DCP (g) and TDN (kg) per day was similar in three groups statistically. The apparent digestibility of dry matter (DM), organic matter (OM), ether extract (EE) and nitrogen free extract (NFE) was significantly (p<0.05) more in group II than group III, whereas the digestibility of DM, OM and NFE was similar in group I and II. The digestibility of crude fiber (CF) and all the fiber fractions i.e. NDF, ADF, cellulose and hemicellulose was alike in 3 groups. Nitrogen balance (g/d) was significantly (p<0.05) more in group III as compared to group I and II, which were alike statistically, though the N intake (g/d) was similar in 3 groups but N balance (g/d) was significantly (p<0.05) less in group III as compared to other 2 groups. Significantly (p<0.05) higher concentration of total volatile fatty acids (TVFA), total nitrogen (TN) and its fractions were observed in group I and II as compared to group III. There was no effect on rumen pH, rumen volume and digesta flow rate due to different sources of energy in 3 groups. Similarly the blood serum biochemical parameters (NH3-N, urea-N and total protein) were statistically identical in 3 groups.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.957-965
• /
• 2005

The effect of ammoniation with urea and with soybean meal (SBM) as a source of urease on the nutritive value of wheat straw was evaluated in sheep. Twenty-four male Najdi lambs were used in a 3${\times}$2 factorial design, in which the animals were allocated to three straw treatments: 0% urea-treated (NT), 6% urea-treated (UT) and 2.2% urea-supplemented (US) straws. Each straw treatment was either supplemented or non-supplemented with 70 g SBM $kg^{-1}$ straw during the treatment time with urea, giving a total of six straw treatments. Each of these treatments was individually fed ad libitum to 4 lambs, together with 300 g of barley grain/head/day. Total N content of UT and US straws increased significantly (p<0.001) as compared to NT straw. The degree of urea hydrolysis, either with or without SBM addition, was nearly similar. Lambs fed either UT or US straw based diets had significantly (p<0.01) and numerically (p>0.05) higher straw DM intake (g $d^{-1}$ $kg^{-1}$ $BW^{0.75}$), compared to those fed NT straw based diet. Apparent DM or OM digestibilities increased significantly (p = 0.014) in lambs fed UT diet, and numerically (p>0.05) in lambs fed US diet as compared to those fed NT diet. Fiber (CF, NDF, ADF, cellulose and hemicellulose) digestibility increased to a similar magnitude, averaging 20.2 (p<0.001) and 7.8% (p<0.07); this corresponds to 35 (p<0.001) and 51% (p<0.001) in N digestibility and approximately 78 (p<0.017) and 105% (p<0.002) in N retention, for UT and US diets, respectively, as compared to NT diet. However, the UT diet had higher (p<0.01) fiber digestibility over the US diet. Addition of SBM tended to improve (p = 0.09) straw DM and digestible OM intakes, while significantly increasing (p<0.001) total and digestible CP intakes across all diets. Lambs fed on US diet had higher ruminal ammonia N than those fed on UT (p<0.05) or NT (p<0.001) diets. However, ruminal pH and molar proportion of the volatile fatty acids did not differ (p>0.05) among the treatment diets. This study suggests that US and UT treatments, particularly the latter, improved straw intake, digestibility and N utilization by lambs compared to NT treatment. On the other hand, addition of SBM as a source of urease had a negligible effect on urea hydrolysis.